PROAIM P-CNL-3MC 3 Feet Curve-N-Line Video Camera Slider Instruction Manual
- October 27, 2023
- PROAIM
Table of Contents
3ft Curve-N-Line Video Camera Slider with
Motion Control System (P-CNL-3MC)
Assembly Manual 
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Curve-N-Line Video Camera Slider Setup
- Loosen the knobs of both end feet to adjust them as per your requirement.
- Using an allen key, unscrew the bolts from both ends of the slider to attach the end feet.
- Attach the camera mounting plate assembly onto the slider and tighten it with the help of the knob provided.
- Attach one end of the provided 3m wire with the motor and another end with the remote controller as shown.
Motor With Slider Setup
Caution: While performing this step, ensure that your camera plate is mounted onto the slider.
- Push the motor towards your side and pull the lever to attach the motor to the slider.
- Screw the fluid head (Not Included) onto the slider’s camera mounting plate and detach the fluid head’s quick release plate to mount the camera.
- Attach the camera to the fluid head’s quick release plate, tighten the screw with a screwdriver (Not Included), and mount it on the fluid head.
- Now tighten the knob to secure it properly.
NOTE: Remove the motor by unscrewing the allen bolt using an allen key to use it manually.
REMOTE CONTROLLER
The controller can program precise camera movements for interviews, establishing shots,and other camera movements.
- Batteries: 12V DV battery (Not Included) / 12V DC adapter (Included)
- Red LED Indicates Power ON/OFF
- Orange LED Indicates when using Battery / DC Adapter
- Green light blinks continuously in manual mode
- Green light on continuously on auto mode
- In Auto Mode: Motor Move left or right in automatically
- Normal Mode: Move motor left or right in Manually.
YOUR PROAIM CURVE-N-LINE VIDEO CAMERA SLIDER WITH MOTION CONTROL SYSTEM ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL
ACCESSORIES)
Warranty: We offer one year warranty for our products from date of
purchase. Within this period of time, we will repair it without charge for
labor or parts. Warranty doesn’t cover transportation costs nor does it cover
a product subjected to misuse or accidental damage. Warranty repairs are
subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.