ALL SOLAR CENTRAL SF011 Solar Desert Spring Fountain Instruction Manual
- June 17, 2024
- ALL SOLAR CENTRAL
Table of Contents
SF011 Solar Desert Spring Fountain Instructions
By All Solar Central
Thank you from the entire ASC family for purchasing an ASC solar product! Please read this entire booklet before assembly.
Package contents:
Fountain:
1 x Spring Fountain Body
1 x Ball
1 x LED Light
Solar Water Pump Kit:
1 x Water Pump with 16 ft. Cable
1 x Set of Fountain Nozzles
1 x Solar Panel with Battery
1 x Solar Panel Bracket
1 x Extension Tube
1 x Ground Spike
Notes: If there is any damage to the fountain or missing parts, please contact us at 1-626-582-8898 or www.allsolarcentral.com/contactus
FOUNTAIN ASSEMBLY:
- BALL
- LED LIGHT POWER CORD
- RESERVOIR
- PUMP POWER CORD
1. Feed the pump and LED Light cable through the plastic tube in reservoir and exit from the bottom of the Fountain Body.
2. Fill the reservoir with water so the pump is completely submersed. Note: In order to reduce mineral deposits and bacteria build-up, it is recommend using distilled water.
- RESERVOIR
- FOUNTAIN BODY
3. Attach the pump to the rubber hose from the ball.
- RUBBER HOSE
- PUMP
4. Place the ball with connected pump onto the reservoir of the fountain body. Then, connect pump and LED cables to the solar panel.
- RESERVOIR
- BALL
- PUMP
- FOUNTAIN BODY
SOLAR PUMP KIT SSEMBLY:
Please refer to Solar Water Pump Kit Instructions.
Please visit www.allsolarcentral.com for more product detail and offers.
References
- AllSolarCentral: Eco-Friendly Solar Powered Water Pump and Fountains – Allsolarcentral.com
- Contact Us – Allsolarcentral.com
- Manual-Hub.com – Free PDF manuals!