PROAIM P-MLMT-M2 Multi Monitor Mounting System for Video Camera Instruction Manual

PROAIM P-MLMT-M2 Multi Monitor Mounting System for Video Camera

Product Information

The Proaim Multi Monitor Mounting System for Video Camera (P-MLMT-M2) is a versatile mounting system designed to securely hold multiple monitors for video production. The system includes two base rod mounts, two rod clamps, two rod tubes, four rod clamp rail holders, two tube rail clamps with a 5/8 baby pin, and an L-Type Allen Key (Size: 4mm). The cheese plates with scaffold clamps allow for accessory attachment and the option of drilling the system into the cart deck for permanent attachment.

Product Usage Instructions

1. Inspect the contents of the package to ensure you have received everything listed in the “What’s In The Box” section.
2. Assemble the rods by connecting the base rod mounts and rod tubes.
3. Mount the rod clamps onto the assembled rods and tighten them properly using the knob.
4. Attach the rod clamp rail holders onto the rod clamps.
5. Mount the tube rails onto the rod clamp rail holders and tighten them using the knob. The tube rail clamps come with a 5/8 baby pin that can be adjusted according to your requirement.
6. Mount the multi-monitor system onto your cart by clamping it onto the cart deck or drilling it in, depending on your cart model. The system has multiple sturdy knobs to facilitate secure monitor attachment and effortless adjustments.
7. You can mount at least two monitors in any left-right-center position according to your need.

Note : The Proaim Multi Monitor Mounting System can be used with Proaim Sound Chief Cart, Atlas & Victor Cart Series by clamping it onto the cart deck. However, for the Proaim Bowado Cart, drilling is required for mounting.
Note : The system comes with optional accessories that can be attached to the cheese plates with scaffold clamps.

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

Multi-Monitor Mounting System Setup

Assembling of Rod

• Loosen the knob of the base rod mount and insert the rod in the base rod.
• After inserting the rod, properly tighten the knob, as shown in the image.

Mounting of Rod Clamp

• Loosen the knob of the rod clamp and mount the clamp onto the rod.
• After mounting the clamp onto the rod, properly tighten it with the knob, as shown in the image.

Mounting of Rod Clamp Rail Holders

Loosen the knob of the rod clamp rail holder and mount it on the rod.
After mounting the rod clamp rail holder, properly tighten it using the knob and repeat the same process to insert the second rail holder.
Repeat the same process for assembling the other side.

Mounting of Tube Rail

• Create the space to insert the rod clamp by equally loosening the bolts of all the rail holders using the 4mm Allen key.
• Properly insert the tube rail into the rod clamp rail holder.
• After inserting the tube rail, properly tighten the bolts using the 4mm Allen key.
• Repeat the same process to insert the second tube rail clamp.

Mounting of Tube Rail Clamp

• Loosen the knob of the tube rail clamp and mount it on the tube rail.

• After mounting, properly tighten it using the knob.
  NOTE : It is a 5/8″ baby pin & you can mount multi monitor system.

• Repeat the same process to insert the second tube rail clamp.
  NOTE : The cheese plates with scaffold clamps to meet your accessory needs while giving you the option of permanently drilling the system into your cart deck with the drilling option.

Adjustment of 5/8” Baby Pin

• Loosen the 5/8” baby pin and remove the baby pin.
• Insert the 5/8” baby pin in the other mounting thread.
  NOTE : Adjust the position of the 5/8” baby pin according to your requirement.

Mounting of Multi Monitor Mounting System to the Cart

• Loosen the knob of the rod clamp to mount the multi monitor mounting system and then rotate it.

• Properly tighten it using the knob.
  NOTE : The Rod clamp pans 360° and can be easily adjusted according to the width of your cart.

• Loosen the ratchet knob of the rod clamp and then attach it to the cart (Not Included).

• Properly tighten the ratchet knob. Repeat the same process to attach the second rod clamp
  NOTE : It has multiple sturdy knobs to facilitate secure monitor attachment and effortless adjustments

Multi Monitor Mounting System Setup

• Loosen the knob of the monitor system (Not Included) and mount it on the 5/8” baby pin.

• After mounting the monitor system, properly tighten the knob.
  NOTE : For Proaim Sound Chief Cart, Atlas & Victor Cart Series, the mounting system will be attached by clamping; however, for the Proaim Bowado Cart, you will need to drill the mounting system .
  NOTE : You can mount the monitor system in any left-right-center position, according to your need.

• You can mount at least two monitors with a sleek design

YOUR PROAIM MULTI MONITOR MOUNTING SYSTEM ALL DRESSED UP AND READY TO GO!

Warranty

We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.

Liability:
We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our ut-most support and care until you use our product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>