Shenzhen N2 Night Vision Binoculars User Manual

User Manual
N2
Night Vision Binoculars

N2 Night Vision Binoculars

Manufactured by: Shenzhen GTMEDIA Technology Co., Ltd
Address: 601A, comprehensive building, Nankeng second industrial zone, Nankeng community, Bantian street, Longgang District Shenzhen, 518000, Guangdong, CN
European Company: GTMAX TECHNOLOGY, S.L.
Address: C. DEL PUERTO DE POZAZAL, 4, NAVE 32,28031 MADRID,ESPANA,

1 Focus wheel
2 IRLED
3 IR Up/Zoom in/Up button
4 IR Down/Zoom out/Down buticn
5 Menu bution
6 Mode button| 7 Power button
8 Shot button
9 Type-C port/TF card
10 Strap hole
11 Battery cove
12 View Area
---|---

Specification

Still Image Size: 10M(4032°2520/8M(3800°2160)/ 5M(32001800)/3(2560″ 1440)/VGA(B40°480)
Video Size: FHD(19201080@30FPS)HD(1280’720@30FPS)
Digital Zoom: 5X
Storage Media: TF card up to 128G6
Viewing Distance in Complete Darkress: 200m-300m
Viewing Distance in Low Light: 3m-infinty
IR LED: 3W, 850nm, 7-gear intensity adjustable
Interface: Type-C
Power Source: DC5V or 6°AA batteries
Operating Temperature: -20°C to+60°C
Storage Temperature: -30°C t0+70°C

Install Batteries

• Pleasa instal batteries into the device befora using.
• Open the battry cover 11 on the back of device.
• Insert 6°AA brand alkaline battries ino the battery compartment. Make sure The polary is corect 6°AA batter use longor ime.
• Close the battery cover 11.

Inserting Memory Card

• Please prepare a Class 10 TF card(up to 128G8) in advance.
• Open the card slot cover 9, you will see the card slot.
• Insertthe TF card into the siot. Make sure the direction is right. Never insert the card forcibly.
• Format the TF card, this can improve the compatibity of TF card.
• To remove the card from the memory card slot o the device, press the edge of the memory card in gently, the card will 50p out. Then remove the card

Note: The devicswil prompt “NO carithe TF card did not instlled.

Basic operation

Turn On And Turn Off

• Long press the Power button 7 for 3 seconds to tum on the device
• Long press the Power button 7 to tum off the device.
• Watch the eyepiec/cisplay screen Tand adjust the focus wheel according to the actual distance to focus unti the screen s clear. the ight s insuflcient or used n the evening, tum on the IR by pressing the IR Up butlon 3 Increase the brightness by pressing the buton repeaiedly It has 7 levels of brighiness(0> 1 2 3) 4> 5 6 7> 0..)The brightness can be adjusted according to your needs.
  Long press IR up to zoom.

Changing The Modes

The night vrsion has diffrent modes Photo e, Video more and Payback mod. Pess the Mods buton 6 can change mode.

| For taking still photos| Photo Mode
---|---|---
| For recording video| Video Mode
| For playing the recorded| Playback Mode

Taking still photos.

1. Tum on the device the default is Video mode. Please press the Mode button 6 to switch to photo mode.
2. Zooming:
   Keep pressing the or Zoom infout button 3/4 to 200m in or zoom out the image. The value of ‘magnification level appears on the LCD screen.

Night Vision mode
Short press the button 3 to adjust the brightness of the infrared gear

4 Take a stilli  photo.

• View your subject va the LCD screen.
• Adjust the focus by turming the focus wheel for night or nsuficient ight use, turn on the IR by pressing the IR Up button 3. Increase the brightness by pressing the button repeatedly. It has 7 levels of bightness(0> 1) 2) 3 4) 5 6 7>
• The brightness can be adjusted according to your needs.
• Press the Shot button 8 to take a photo.

Recording Video

1. After booting, the default is video recording mode, if not, press the Mode button 6 to switch to video recording mode.

2. Zoom:
   Long press the Zoom in/out button 3/4 key to zoom in or out the image. The scaling value will be displayed on the LCD screen.

3. Night Vision mode
   Short press the button 3 to adjust the brightness of the infrared gear

4. Start to record video.
   -View your subject via the LCD screen.
   -Adjust the focus by turning the focus wheel
   For night or insufficient light use, turn on the IR by pressing the IR Up button 3).
   Increase the brightness by pressing the button repeatedly. It has 7 levels of brightness(0> 1> 2> 3> 4> 5> & 7> 0…)The brightness can be adjusted according to your needs, darker and need adjusted more brightness.
   – Press the Shot button 8 to start to record. The record duration will be shown on the LCD screen.

5. Finish recording.
   – Press the Shot button (8) again to stop recording.
   – The device will stop recording automatically once capacity of the memory card is full.

Notice:

Device Power Off

If the device won’t activate, check to see if the battery is defective, missing, or incorrectly installed. Replace or install the battery correctly. Please make sure and use 6*AA alkaline batteries.
Poor Image

• lf you wear glasses, please keep them on while using the device.
• If at day, make sure the IR is off (If IR is on, screen is black and white or the screen is colored).
• If at night, make sure you have turned on the IR, press IR Up button 3 (If IR is on, screen is black and white).
• Adjust the focus by slowing turning the focus wheel (1. Make sure it is focused.

IR – LED (Night vision function)

In photo/video mode, of you have to view the darkness environment, please short press IR Up bution (3 to activate the IR LED, the image will change to black and white. The IR LED have soven levels, short press IR Up button 3 to up the level, short press IR Down buttor 4 to down the level.
Note: If he battery voltage is not enough, the IR LED level wil down automaticall. IR level can up to 7 levels when the battery power is ful.

Settings in Photo and Video Mode

Press Menu bution 5 in photo or video mode, can change the settings.

5M (3200°1300)11080P(1920″1080)
2M(1600°1200)1M(1280°960)
VGA(B4C450)
Resolution| 1080P(1920*1080)1960(1280°960)
720P(1280°720)VGA(B40°480)
Audio| Options: on/off
Sensitivity| Options: Low/Midcle/High
Burst Shooting| Options: ON/OFF
Brightness| 1/2/3/4/5/6/7
Light Source Frequency| Options: 50Hz/60Hz
Beep sound| Options: ON/Off
Date Tag|
Automatic Shut down| Optons: Shut 3 minutes/5 minutes/10 minutes
Soreen Protector| Set screon saver tme
Options: Off 3 minutes/5 minutes/10 minutes
Language| Set OSD (on-scroen) Language.
Options: English; Franch: Spanish;
Portuguee; ltalian; Simpiified Chiness;
Tradionsl Chinese; Russian; Japanase
Formatting| All date will be deeted.
Optons: Confirm/Cancel
Default Setting| Roturn menu satting to defaus.
Options, Confirm/Cancel
version| User can soe the fimware version information

Playback

1. After booting, the default mode is video recording. If you want to play back pictures or videos, please press the Mode button 6 to switch to playback mode.
2. Press the Up/Down button 3/4 to browse photos and video files.
3. Playback the video
   – Press the Shot button 8) to start playing the video files.
   – Press the Shot button 8 again to have a pause.
   – Press Menu button 5 to stop the current video playing.
   – In playback mode, press the Menu button 5 to display the playback menu.
   Press the Up/Down button 3/4 to select “File Lock” and “File delete”. Press the Shot button 8 to confirm and select a menu to enter the option interface. Press the Menu button 5 to return to the previous level.

Playback menu list :

Download files to PC

Using a Card Reader

1. Ejact the memory card from the devics and insert if into a card reader.Then connect the card reader to compurer
2. Open [My Computer] or [Windows Explorer] and double-cick the removable disk icon that represents the memory card
3. Copy images from the card into a direstory of your choice on the computer’s hard disk.

Notes on Cleaning

Before cleaning the device, disconnect it from the power supply (remove btterios) Only use a dry  cloth t0 clean the extarorof tho dovico. To avoid damaging the slecionic, do not use any cleaning lid. Clean he eyepieces andlor lenses only with a soft, lint-free cloth, (e.g.microfibre cloth). To avoid scratching the enses, use only gonte pressure with he laaning cot. Prtect ho dovis fom dust and moisture. Stro tn a bag r box. Removs th batiries ffom he device it not used for a longer tme.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>