VISUAL COMFORT KS 5404 Signature Collection Light Instruction Manual

VISUAL COMFORT KS 5404 Signature Collection Light

Product Specifications

• Product Name: Prescott Large Mobile Chandelier
• Model Number: KS 5404
• Options: Semi-Flush Mount & Pendant
• Bulbs: Not included
• Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Assembly Instructions – Semi-Flush Mount Option:

1. Remove all parts from the box and place on a clean, soft surface.
2. Remove collar ring (E) from collar loop (C).
3. Feed wire through nipple (I), collar ring (E), canopy (D), and collar loop (C).
4. Secure collar loop (C) to mounting plate (A) using pliers to tighten locknut.
5. Thread nipple (I) onto fixture body (J), then thread collar loop (C) to nipple (I).
6. Install mounting plate (A) to junction box and secure with mounting screws (B).
7. Wrap fixture ground wire (bare copper) around the green grounding.
8. Loosen thumbscrews (F), then install shades (H) to shade holders (G) and secure with thumbscrews (F). Do not over-tighten.

Assembly Instructions – Pendant Option:

1. Remove all parts from the box and place on a clean, soft surface.
2. Remove collar ring (E) from collar loop (C).
3. Feed wire through rod (M), collar ring (E), canopy (D), and collar loop (C).
4. Secure collar loop (C) to mounting plate (A) using pliers to tighten locknut.
5. Thread rod (M) onto fixture body (J), then thread collar loop (C) to nipple (I).
6. Install mounting plate (A) to junction box and secure with mounting screws (B).
7. Wrap fixture ground wire (bare copper) around the green grounding.

Frequently Asked Questions:

• Q: Are bulbs included with the chandelier?
  A: No, bulbs are not included with the chandelier. You will need to purchase bulbs separately.

• Q: How should I clean the chandelier?
  A: Clean the chandelier only with a soft dry cloth or feather duster. Avoid using abrasive or chemical agents for cleaning.

ASSEMBLY INSTRUCTIONS

Semi-Flush mount option

Prescott Large Mobile Chandelier
Item # KS 5404

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED)

Phillips Screwdriver
Slotted Screwdriver

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Remove collar ring (E) from collar loop (C).

3. Feed wire through nipple (I), collar ring (E), canopy (D) and collar loop (C).

4. Secure collar loop (C) to mounting plate (A) using pliers to tighten locknut.

5. Thread nipple (I) onto fixture body (J), then thread collar loop (C) to nipple (I).

6. Install mounting plate (A) to junction box and secure with mounting screws (B).

7. Wrap fixture ground wire (bare copper) around the green grounding screw (see diagram 1). Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (K).
   NOTE : It is imperative that the fixture is grounded.

8. Connect fixture neutral wire (ribbed) to the supply neutral wire (usually white) using wire nut (K).

9. Connect fixture hot wire (smooth with markings) to the supply hot wire (usually black) using wire nut (K).
   CAUTION : Do not reverse the hot and neutral connections.

10. Install canopy (D) to mounting plate (A) and secure with collar ring (E).

11. Install light bulbs into the sockets.

Prescott Large Mobile Chandelier
Item # KS 5404

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
12. Loosen thumbscrews (F), then install shades (H) to shade holders (G) and secure with thumbscrews (F).
NOTE: Do not over-tighten, otherwise glass could become damaged.

Care Instructions : Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Prescott Large Mobile Chandelier
Item # KS 5404

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED):

• Phillips Screwdriver
• Slotted Screwdriver

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Remove collar ring (E) from collar loop (C).

3. Feed wire through rod (M), collar ring (E), canopy (D) and collar loop (C).

4. Secure collar loop (C) to mounting plate (A) using pliers to tighten locknut.

5. Thread rod (M) onto fixture body (J), then thread collar loop (C) to nipple (I).

6. Install mounting plate (A) to junction box and secure with mounting screws (B).

7. Wrap fixture ground wire (bare copper) around the green grounding screw (see diagram 1). Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (K).
   NOTE: It is imperative that the fixture is grounded.

8. Connect fixture neutral wire (ribbed) to the supply neutral wire (usually white) using wire nut (K).

9. Connect fixture hot wire (smooth with markings) to the supply hot wire (usually black) using wire nut (K).
   CAUTION : Do not reverse the hot and neutral connections.

10. Install canopy (D) to mounting plate (A) and secure with collar ring (E).

11. Install light bulbs into the sockets.

Pendant option

Prescott Large Mobile Chandelier
Item # KS 5404
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved. 12. Loosen thumbscrews (F), then install shades (H) to shade holders (G) and secure with thumbscrews (F).

NOTE: Do not over-tighten, otherwise glass could become damaged.

Care Instructions : Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>