Honeywell BG-10 Series Pull Station Instruction Manual
- June 9, 2024
- Honeywell
Table of Contents
Honeywell BG-10 Series Pull Station
Product Installation Drawing
Note: The switch rating is 3 amps @ 30 Volts AC/DC
- Denotes solder connection
BG-10, BG-10L, BG-10WP,BG-10SP, HR-10, AR-10F
BG-10A
BG-10P/T
BG-10N
Description
The BG-10 Series Pull Stations are non-coded, dual-action, normally-open manual pull stations with the following options: BG10A (with AUX. switch); BG- 10L (with key for reset); BG-10P/T (with key for presignal or test); BG-10N (without terminal block); BG-10WP (BG-10 enclosed in a weatherproof backbox); HR 10 (Halon Release, with wiring the same as the BG-10); AR-10F (Agent Release, with wiring the same as the BG-10).
BG-10 Series Operation
When the dual-action door is pushed in and the handle pulled down, the N.O. push-type switches will close. The handle cannot be restored to its normal position until the station is manually reset by unscrewing the hex screw and pivoting the case downward, away from the backplate. When the handle is restored, return the case to its normal position and secure with the hex screw. Note: The BG-10L utilizes a mechanical key instead of a hex screw. The microswitch of the BG-10P/T is activated by rotating a key clockwise. The key cannot be removed while in this position.
Customer Support
12 Clintonville Road, Northford, CT 06472
Phone:203-484-7161
FAX:203-484-7118
Technical Manuals Online! –
http://www.tech-man.com
firealarmresources.com
Documents / Resources
|
Honeywell BG-10 Series Pull
Station
[pdf] Instruction Manual
BG-10 Series Pull Station, BG-10 Series, Pull Station
---|---