FINISHX FC1000 Ultimate Clear Coat Instructions
- August 31, 2024
- FINISHX
Table of Contents
FINISHX FC1000 Ultimate Clear Coat
Product Information
Specifications:
- Product Name: FC1000 FINISHX ULTIMATE CLEAR COAT 4:1
- Product Description: Clearcoat for application ranging from spot repair, panel repair, to overall refinish.
- Color: Transparent
- Theoretical Spreading Rate: 250-300 m2/l at 1 m
- Mixing Ratio: FC-1000 Clear 100 (vol), FC1010 Fast Activator or FC1020 Standard Activator 25 (vol), FC1030 Slow Activator 25 (vol)
- Spray Viscosity Potlife: HVLP gravity-feed spraygun, Compliant gravity-feed spraygun
- Application Drying: Number of spraycoats: 1 thin + 1 wet coat, Flash-off: 15 mins, Film thickness: 45 mins
- IR Drying: Step 1 – short wave: 5 mins at an 80 cm distance, Step 2 – medium wave: 20 mins at an 80 cm distance
- Further Treatment: Polish after specified drying times and cooling
- Actual VOC (RTS): 4.2lbs/gal
- Regulatory VOC (RTS): 4.2lbs/gal (less water and exempt solvents)
Product Usage Instructions
Pre-treatment:
Apply on a clean and dust-free FINISHX basecoat. Refer to TDS of basecoat for
other substrate preparation.
Mixing Instructions:
Mix FC-1000 Clear with the specified volumes of activators according to the
provided ratios.
Spray Application:
Apply 1 thin coat followed by 1 wet coat. Allow specified flash-off and drying
times between coats.
Drying Process:
Utilize IR drying after achieving a dust-free state for optimal results.
Follow the specified short and medium wave durations at appropriate distances.
Further Treatment:
Polish the surface after the recommended drying times and cooling period.
FAQ
-
Is this product suitable for DIY use?
No, the product is suitable for professional use only. -
Where can I obtain the latest technical data sheet?
You can get the latest technical data sheet directly from your supplier.
Product Description
ClearCoat for application ranging from spot repair, panel repair,to overall refinish.
Technical Characteristics
- Color: transparent
- Shelf life: 24 months at 77°F
- Theoretical spreading rate: 250-300 m2/l (avg) at 1 μm
Pre-treatment
FINISHX ULTIMATE CLEAR COAT 4:1 Clearcoat is suitable to be applied on top of a clean and dust-free FINISHX basecoat. See TDS of basecoat for other preparation of substrate.
-
Mixing Ratio
Mix well and strain before application.
Note:- FC1010 is for temperature below 65°F
- FC1020 is for temperature between 70°F-90°F
- FC1030 is for temperatures above 85°F
-
Spray Viscosity Potlife
- 16 to 1 seconds DIN 4 cup at 77°F
- 1-2 hours at 77°F
-
Sprayguns
- HVLP gravity-feed spraygun
- 1.2 – 1.3mm
- 1.5 – 2.0 bar
- 10 –15 cm
- Compliant gravity-feed spraygun
- 1.3 – 1.6mm
- 3.0 – 4.0 bar
- 15 – 20 cm
-
Application
Number of spraycoats: 1 thin + 1 wet coat- Flah-off: 2 – mins
- Film thickness: 40 – 60 μm
-
Drying
-
IR Drying
IR drying after dust free- Step 1 – short wave: 5 mins at a 80 cm distance
- Step 2 – medium wave: 20 mins at a 80 cm distance
-
Further Treatment
Polish after specified drying times and cooling. -
PHYSICAL DATA
- Actual VOC (RTS): 4.2lbs/gal
- Regulatory VOC (RTS): 4.2lbs/gal (less water and exempt solvents)
The products are suitable for professional use only. The data contained in this publication are based on our current knowledge and experience. You can obtain the latest version of technical date sheet directly from your supplier.
Manufacturer/Supplier: LAUCO PRODUCTS
Address: PO BOX 592548 Orlando FL
32859-2548
Email: info@abcies.com
Telephone: 1 800 208 0259
Manufacturer Emergency Telephone: 1 800 535 5053, Issue 15 Apr 2019