Happy Polly 35.2oz-1L Rabbit Cat Water Fountain Instructions

: June 17, 2024
: Happy Polly

Table of Contents

Happy Polly 35.2oz-1L Rabbit Cat Water Fountain
Specifications:
READ BEFORE YOU START
WHAT’S IN THE BOX
ASSEMBLY INSTRUCTIONS
CARE INSTRUCTION:
FAQ (Frequently Asked Questions)
- Q: How do I adjust the flow of water in the fountain?
- Q: Where can I get assistance if I encounter issues during installation?
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Happy Polly 35.2oz-1L Rabbit Cat Water Fountain

INSTRUCTION MANUAL

RABBIT
CAT WATER FOUNTAIN

Specifications:

Model: Rabbit Cat Water Fountain Size: 5.9 inches
Flow Control: Adjustable button (Max and Min flow settings)
Filter Installation: Long side of the filter connected to the sucker
Plug Position: Adjustable for specific situations

READ BEFORE YOU START

Please identify and sort all components shown below.
For any issues during installation, please ask for assistance at service@happyandpolly.com or check our You-Tube Channel https://www.youtube.com/channel/UCbPD98rZ-jOYrTCQA_0eNLg.

SAFETY GUIDELINES TO PREVENT INJURIES

When using electrical appliances, basic safety precautions must always be followed to avoid the risk of fire, electric shock, and/or injury to persons.
To avoid the risk of injury, close supervision is necessary when any appliance is used by or near children.
To protect against electric shock, do not place the electrical power cord or plug in water or other liquids.
Indoor household use only. Do not use outdoors or run dry.
Unplug the fountain, then disconnect the in-line plug.
To avoid the risk of electric shock, do not place or store an appliance where it can fall or be pulled into a bath-tub or sink.
Always unplug an appliance when it is not in use, before putting on or taking off parts, and before cleaning.
Do not use an appliance for anything other than its intended use.
Do not allow pets to chew on or swallow any parts. If you are concerned about the power cord, purchase a cord conduit (a hard plastic protector) at any hardware store.
Do not attempt repairs on the pump.
To avoid the possibility of the plug or electrical outlet getting wet, the electrical outlet should always be above the level of the fountain.
If an extension cord is necessary, an extension cord with a proper rating should be used.

IMPORTANT

Please identify and sort all components shown below.
Only rinse the filter with water. Never wash the filter with soapy water as the soap residue will seep into the filter permanently.
Use replacement filters authorized by Happy & Polly only. Using unauthorized filters may void the warranty.

WHAT’S IN THE BOX

WHAT'S IN THE BOX

ASSEMBLY INSTRUCTIONS

Adjust the button to control the flow. + is Max. Flow, – is Min. Flow

Detach the pump Fountain with Derachable Lid

Insert the carbon filter

Recover the Pump

Assemble the pump & filter Box. The long side of the filter is connected to the sucker.

Make Sure the USB Cable through the fountain from the inside.

Make sure the Fountain is Sealet by the rubber plug tightly.

Put them in the middle of the Fountain.

Adjust the Cable

CARE INSTRUCTION:

When using for the first time, please rinse the filter box for 2 minutes to flush out impurities caused by collision.
Clean the Water Fountain every 7 days.
To achieve the ideal filtering effect, it is recommended to replace the filter box once a month.