Happy Polly Spring Series Cat Water Fountain Instruction Manual
- June 13, 2024
- Happy Polly
Table of Contents
Happy Polly Spring Series Cat Water Fountain
Product Information
The Spring Series Cat Water Fountain – Style S is a cat water fountain designed to provide fresh and filtered water for your feline friend. It features an adjustable flow control button and a filter to ensure clean and ealthy water for your cat. The fountain is designed with safety guidelines to prevent injuries and comes with various components for easy installation.
Product Usage Instructions
-
Before starting the installation, please identify and sort all the components shown in the manual.
-
If you encounter any issues during installation, you can seek assistance by contacting [email protected] or checking our
YouTube Channel at https://www.youtube.com/channel/UCbPD98rZ-jOYrTCQA_0eNLg. -
For safety reasons, it is important to follow these guidelines to prevent injuries:
- Adjust the button to control the flow of water. The “+” symbol represents the maximum flow, while the “-” symbol represents the minimum flow.
- Ensure that the long side of the filter is connected to the sucker.
- The plug’s position can be adjusted to fit your specific situation.
-
Once the installation is complete, refer to the care instructions for proper maintenance of the cat water fountain.
Care Instructions:
Proper care and maintenance will ensure the longevity and effectiveness of your Spring Series Cat Water Fountain – Style S. Follow these care instructions:
- Regularly clean the fountain by disassembling it according to the provided instructions.
- Thoroughly rinse all components with water and mild soap.
- Ensure all parts are completely dry before reassembling the fountain.
- Replace the filter regularly as recommended in the manual to maintain optimal water quality.
READ BEFORE YOU START
- Please identify and sort all components shown below.
- For any issues during installation, please ask for assistance at [email protected] or check our YouTube Channel https://www.youtube.com/channel/UCbPD98rZ-jOYrTCQA_0eNLg
SAFETY GUIDELINES TO PREVENT INJURIES
- When using electrical appliances, basic safety precautions must always be followed to avoid the risk of fire, electric shock, and/or injury to persons.
- To avoid the risk of injury, close supervision is necessary when any appliance is used by or near children.
- To protect against electric shock, do not place the electrical power cord or plug in water or other liquids.
- Indoor household use only. Do not use outdoors or run dry.
- Unplug the fountain, then disconnect the in-line plug.
- To avoid the risk of electric shock, do not place or store an appliance where it can fall or be pulled into a bath-tub or sink.
- Always unplug an appliance when it is not in use, before putting on or taking off parts, and before cleaning.
- Do not use an appliance for anything other than its intended use.
- Do not allow pets to chew on or swallow any parts. If you are concerned about the power cord, purchase a cord conduit (a hard plastic protector) at any hardware store.
- Do not attempt repairs on the pump.
- To avoid the possibility of the plug or electrical outlet getting wet, the electrical outlet should always be above the level of the fountain.
- If an extension cord is necessary, an extension cord with a proper rating should be used.
IMPORTANT
- Please identify and sort all components shown below.
- Only rinse the filter with water. Never wash the filter with soapy water as the soap residue will seep into the filter permanently.
- Use replacement filters authorized by Happy & Polly only. Using unauthorized filters may void the warranty.
ASSEMBLY INSTRUCTIONS
CARE INSTRUCTION
- When using for the first time, please rinse the filter box for 2 minutes to flush out impurities caused by collision.
- Clean the Water Fountain every 7 days.
- To achieve the ideal filtering effect, it is recommended to replace the filter box once a month.
© Happy & Polly
www.happyandpolly.com