NeoRuler N01 Metric Scale User Guide

: June 14, 2024
: NeoRuler

Table of Contents

NeoRuler N01 Metric Scale
Specifications
Basic
Start to use
41 Built-in Metric Scales
52 Built-in US Standard Scales
Calibration
Main menu
Scale Ruler
Scale Setting
Customized Scale
Divider
Setting
Accessories
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)
of division

NeoRuler N01 Metric Scale

Specifications

Model: N01
Version: 1.3

Basic

LED Marks
Screen
USB-C Charging Port
Charging Light
NeoPointer
Back / ON-OFF
Select Button
Switch Button

Start to use

NeoRuler has 93 built-in scales distributed in 8 scale modes. Select the default scale mode before use, and switch it in the setting menu.

41 Built-in Metric Scales

Arch ENG I ENG II MAP

1/2	1/125	1/10 0 0	1/10 0 k
1/3	1/150	1/1250	1/125k
1/4	1/20 0	1/150 0	1/20 0 k
1/5	1/250	1/1625	1/250 k
1/10	1/30 0	1/20 0 0	1/50 0 k
1/20	1/4 0 0	1/250 0	1/10 0 0 k
1/25	1/50 0	1/50 0 0	1/20 0 0 k
1/30		1/60 0 0	1/250 0 k
1/4 0		1/10 k
1/50		1/12.5k
1/72		1/20 k
1/75		1/25k
1/10 0		1/50 k

52 Built-in US Standard Scales

Arch ENG I ENG II MAP

6″ = 1′	1″ = 10 ‘	1″ = 30 0 ‘	1″ = 1 Mi
4 ” = 1′	1″ = 20 ‘	1″ = 333′	1″ = 1.5 Mi
3″ = 1′	1″ = 30 ‘	1″ = 4 16.6′	1″ = 2 Mi
2″ = 1′	1″ = 4 0 ‘	1″ = 50 0 ‘	1″ = 3 Mi
1 1/2″ = 1′	1″ = 50 ‘	1″ = 583.3′	1″ = 4 Mi
1″ = 1′	1″= 60 ‘	1″= 60 0 ‘	1″ = 5 Mi
3/4 ” = 1′	1″ = 70 ‘	1″= 625′	1″ = 6 Mi
1/2″ = 1′	1″ = 80 ‘	1″= 666′	1″ = 10 Mi
3/8″ = 1′	1″ = 83.3′	1″= 750 ‘	1″ = 20 Mi
1/4 ” = 1′	1″ = 90 ‘	1″ = 10 0 0 ‘	1″ = 24 Mi
3/16″ = 1′	1″ = 10 0 ‘	1″ = 120 0 ‘	1″ = 25 Mi
1/8″ = 1′	1″ = 166.6′	1″ = 20 0 0 ‘
3/32″ = 1′	1″ = 20 0 ‘	1″ = 30 0 0 ‘
1/16″ = 1′	1″ = 250 ‘

Calibration

When the calibration notiﬁcation shows up, move the NeoPointer to the left for calibration. When ﬁnished, click any button to return.

NeoRuler-N01-Metric-Scale-06

2 sec > ON/OFF
Select
Switch Function
5 min > Sleep, 2 hr > OFF
1.5-2 hrs > 100%

Scale Ruler

NeoRuler-N01-Metric-Scale-08

×1 Back to zero / ×2 Main Menu
Bluetooth Send / Select Scale / Select Unit
Switch (length / scales / unit)

NeoRuler-N01-Metric-Scale-010

Scale Setting

The spacing between the LED Mark

changes when changing the scale. The distance indicator
represents the actual scaled length between two marks.

Back to measure
Switch Scales

Customized Scale

×1 Zero / ×2 Main Menu
Bluetooth Send / Select Scale / Select Unit
Switch (length / scales / unit)

Step 1 | Measure Graphic Length

The principle of customized scale is to measure a section of graphic length corresponding to its actual distance

Unit of Graphic Length
Gr aphic Length

Back to measure
Switch Scales

Input Actual Distance

Use the pointer or press the
button to increase the value of the actual length. Press the ■ button to switch between different digits and units.
Switch digits/Sections
Add value

Divider

Divider allows the user to divide a certain distance (slider’s distance) into 2-12 sections.

of division
Total Length
Section Length

Main Menu
Change # of division
Switch Section

Setting

Mode
(Normal/Caliper)
Scale
(8 Scale Modes)
Battery
Normal/ Performance * In performance mode, NeoRuler does not go into standby or power off
Info

Accessories

NeoRuler’s slider uses a modular snap design that allows you to easily replace the slider pointer or other functional accessories. For more information, please visit the HOZO DESIGN ofﬁcial website.”
The accessories shown on this page are not included and need to be purchased separately.
Place the NeoRuler ﬂat on the desktop when replacing the module, and gently push the pointer forward. Then put the new accessory into the slot.
Download MEAZOR APP to enhance your experience with NeoRuler, Include Data transfer, List mode, Drawing, and much more! Free for lifetime use and Available to download in Apple APP Store and Google Play Store.

Warranty

Special cases
The following cases are not covered by the warranty policy during the warranty period and will be repaired at extra cost.

Damage caused by improper use, maintenance, or storage by the user.
Dismantling of parts under unauthorized circumstances.
No proof of purchase.
The serial number does not correspond to the product sent for repair or has been altered
Damage to the body caused by force majeure
Normal wear and tear of the parts, which need to be replaced
Damage caused by abnormalities in the temperature/humidity of use or storage
Damage to the battery caused by not charging in accordance with the instructions
Any damage caused by not following the instructions.

Warranty period

HOZO Design. CO. – One-year Limited Consumer Warranty covers your product against manufacturing defects for one year from the date you bought your product.

How to send it for repair

If the product needs to be repaired, please contact the distributor and send the product accordingly, and provide a valid device number with proof of purchase.

contact us: support@hozodesign.com

Download MEAZOR APP to view
Scan the QR code with web browser to view online

Contact US

Online form: www.hozodesign.com/contact
Support Email: support@hozodesign.com

Copyright
The above product speciﬁcations are subject to change without notice. All rights of interpretation are reserved by HOZO DESIGN CO.
All trademarks, images, technical data, and intellectual property rights are the properties of HOZO DESIGN CO., Limited and are subject to copyright infringement.