Bestway 41504 Dandy Dodo Kids Ride On Pool Float Instruction Manual

Bestway 41504 Dandy Dodo Kids Ride On Pool Float

Product Information

Specifications

• Dimensions: 2.03m x 1.02m / 68 x 40
• Model Number: 41009

Product Usage Instructions

Inflation

1. Before using the product, carefully check if there are any leaks or broken parts.
2. Open the safety valve and inflate with an air pump (not included) to the design working pressure of 0.03 bar.
3. Fill the chambers until most of the wrinkles are gone and it feels firm to touch but not hard.
4. If you use other pressure, refer to the provided instructions for the appropriate inflation level.

Deflation

1. Open the safety valve to release the air.
2. Fold and roll the product to remove any remaining air.

Maintenance and Storage

1. After deflation, use a damp cloth to gently clean all surfaces. Do not use solvents or other chemicals that may damage the product.
2. Store the product in a cool, dry place and out of children’s reach.
3. Check the product for damage at the beginning of each season and at regular intervals when in use.

Repair Instructions

1. If a chamber is damaged, use the provided repair patch.
2. Clean the area to be repaired.
3. Carefully peel the patch and press it over the area to be repaired.
4. Wait 30 minutes before inflating the product again.

FAQ

Q: Can I use solvents or chemicals to clean the product?
A: No, you should never use solvents or other chemicals that may damage the product. Only use a damp cloth for cleaning.

Q: How often should I check the product for damage?
A: It is recommended to check the product for damage at the beginning of each season and at regular intervals when in use.

Q: What should I do if a chamber is damaged?
A: If a chamber is damaged, you can use the provided repair patch to fix it. Follow the repair instructions provided.

• www.bestwaycorp.com
• 2023 Bestway Inflatables & Material Corp. All rights reserved
• Inflatables & Material Corp., Shanghai, China Manufactured, distributed and represented in the European Union by
• Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2
• 98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: +61 2 9037 1388; New Zealand: +0800 142 101 Distributed in the United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton
• Abbot, Devon, TQ12 6TL Exported by/Exporté par/Exportado por/Exportiert von/Esportato da Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66
• Mody Road, Kowloon, Hong Kong
• www.bestwaycorp.com

Models

PRECAUTION

• WARNING
• PROHIBITION
• MANDATORY

1. NO PROTECTION AGAINST DROWNING
2. DESIGN WORKING PRESSURE: 0.03 BAR
3. NOT FOR CHILDREN 3 YEARS OF AGE AND BELOW, APPLY ONLY TO CHILDREN ABOVE 3 YEARS OF AGE
4. READ INSTRUCTIONS FIRST
5. NUMBER OF USERS, 1 CHILD
6. SWIMMERS ONLY
7. MAXIMUM LOAD CAPACITY 45 KG
8. FULLY INFLATE ALL AIR CHAMBERS
9. ALWAYS SUPERVISE CHILDREN IN WATER
10. POOL USE ONLY
11. DEVICE REQUIRES BALANCING

SEAFTY INSTRUCTION

WARNING
Non-compliance with these operating instructions may expose you to serious danger.

• ATTENTION! NO PROTECTION AGAINST DROWNING!
• SWIMMERS ONLY!
• POOL USE ONLY!|
• Evenly distribute loads when using the product. Tipping and drowning may occur with uneven distribution of loads.

TECHNICAL SAFETY INSTRUCTIONS

Read the manual and follow the instructions relating to safety tips, correct and complete product assembly, use and maintenance.For your own safety, always follow the advice and warnings in these instructions.Only use the product in the places and conditions for which it is intended.

• Full inflate all air chambers.
• Passenger number and load weight should not exceed passenger number and maximum weight capacity in the specifications.
• This product should not be used as a life-saving device.
• Life-saving devices (life jackets and life buoys) must be prepared together and inspected.
• Children must be over the age of 3 and able to balance on their own.
• Keep away from flames and fires.
• Before every use, carefully inspect all product components to ensure everything is in good condition and tightly secured. Please stop to repair if you find any damage.
• Be careful when landing on the ground. Sharp and rough objects such as rocks, cement, shells, glass, etc. may puncture the product.
• Don’t leave the product in the sun for long periods, as high temperatures can increase air pressure and cause damage.
• Only use in water in which the child is within its depth and under adult supervision.
• Adult assistance may be required to maintain balance.
• Do not stand on the toy.
• Hold onto the toy when using it.
• Do not use the toy if you suspect a puncture or leak.
• Proper inflation and use are critical to ensure safety. Tightly close the safety valve before using. Check seams regularly for damage.

INFLATION

1. Before using the product, carefully check if there are any leaks or broken parts. Open the safety valve and inflate it with the air pump (not included) to design working pressure on the product.

2. Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard. If you use another pressure gauge, the pressure should not be more than the specified pressure on the product or on the instruction. Do not over-inflate the product. Do not use an air compressor.
   NOTE: Under and over-inflation of the product will result in safety hazards. It is better to check the pressure of the product each time before using it.

3. Be sure to close the valves after inflation, press in the safety valves after inflation.
   NOTE: Never stand on or rest objects on the product during inflation. Always check the product for leaks before use.

DEFLATION

MAINTENANCE AND STORAGE

1. After deflation, use a damp cloth to gently clean all surfaces.
   NOTE: Never use solvents or other chemicals that may damage the product.

2. Store in a cool, dry place and out of children’s reach.

3. Check the product for damage at the beginning of each season and at regular intervals when in use.

REPAIR
If a chamber is damaged use the provided repair patch.

1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.

References

• Home Page

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>