AGJ BCT-6890 Restaurant Pager System Wireless 20 Coaster Beeper Buzzer System Instructions
- June 17, 2024
- AGJ
Table of Contents
AGJ BCT-6890 Restaurant Pager System Wireless 20 Coaster Beeper Buzzer
System
Product Specifications:
- Pager frequency: 433.92Mhz
- Pager dimension: Not specified
- Pager weight: Not specified
- Shell material: ABS Plastic
- Color: Wine red
- Prompt mode: Ring, vibration, flash
- Label: Customized 3 digit, LED
- OEM Display: Built-in
- Pager battery: 3.7V lithium polymer battery
- Standby Time: 20 hours
- Keyboard Power Supply: DC12V/2A
- Keyboard frequency: 433.92MHZ
- Transmit distance: 300 meters in open field
- Keyboard weight: 245g
- Low power indicator: Yes
- Keyboard dimension: Not specified
- Color: Black
- Keyboard Type: Touch operation
- Transmit Power: 240mW
- Manufacturer: Wirelesslinkx
- Model: BCT-6890
Product Usage Instructions
Charging:
Before using, connect the charging base to power and stack the pagers on the
charger for 10 minutes to charge. Pagers must be charged before any setting.
After removing the pager from the base, settings can be done within 5 seconds.
If setting fails, place the pager back on the charger and repeat the process.
Switch Off Pager:
Connect the charging base to power, place the pagers on the base, input 999 on
the keyboard, and call the pagers. This action will switch off all pagers.
Pagers need to be paired with the keyboard first.
Keyboard ID Setting:
After connecting the keyboard to power, press the call button and delete
button simultaneously on the keyboard. The display will show F1. Press the
call button to enter, and the screen will display 0. Use the number buttons to
change the displayed number, which represents the keyboard ID. After setting,
press the call button to save, and it will return to F1 automatically. Press
the delete button to exit. If the keyboard ID is changed, all pagers need to
be paired with the keyboard again.
Note: Multiple keyboards can call one pager by changing the keyboards’ ID to the same and pairing them with the pagers again.
Frequently Asked Questions (FAQ):
Q: How long does it take to charge the pagers?
A: It takes approximately 10 minutes to charge the pagers stacked on the
charging base.
Q: What is the range of transmission for the keyboard?
A: The keyboard has a transmission distance of 300 meters in an open
field.
Q: Can multiple keyboards be paired with one pager?
A: Yes, multiple keyboards can call one pager by changing their IDs to
the same and pairing them with the pagers again.
Product List
SPECIFICATION
| Coaster pager | Touch keyboard |
|---|---|
| Pager frequency | 433.92Mhz |
| Pager dimension | 80×12mm / 3.15×0.47in |
| Pager weight | 50g |
| Shell material | ABS Plastic |
| Color | Wine red |
| Prompt mode | Ring, vibration, flash |
10.63×3.54×0.98in
Label OEM| Customized| Color| Black
Display| 3 digit, LED| Keyboard Type| Touch operation
Pager battery| Built-in 3.7V lithium polymer battery
Low battery indicator
| Transmit Power| 240mW
Manufacturer| Wirelesslinkx
Standby Time| 20 hours| Model| BCT-6890
Instructions
-
Charging: Before using, please connect the charging base to power, and put the pagers stacked on the charger for 10 minutes to charge. Before doing any setting, the pagers have to be charged on the charging base. After taking the pager off the base, within 5 seconds the setting can be done. If the setting failed, put the pager back to the charger and take it off again to repeat the setting.
-
Switch Off Pager: Connect the charging base to power, and put the pagers on the charging base. Input 999 on the keyboard and call the pagers. And all pagers will be switched off. Pagers need to be paired with keyboard first.
-
Keyboard ID Setting: After keyboard is connected to power, press call button and delete button at the same time on the keyboard,the display shows “F1”. Press the call button to enter, the screen displays “0”. Press the number buttons to change the displayed number. This is keyboard ID number. After setting, press the call button to save and it will automatically return to F1.
Press delete button to exit. If keyboard ID is changed, all pagers need to be paired with the keyboard again. -
Pager Number Setting: Charge pagers first. Press call button and delete button at the same time on the keyboard, the display shows “F1”. Press the number button “2”, the display shows “F2”. Press the call button to enter, the display shows “0”. Press the number buttons to change the displayed number. This is pager number. Take off one charging pager now, and press the call button within 5 seconds. If the pager flashes and beeps, pairing is successful. Press delete button to exit.
If failed, you will need to put the pager back on top of the charging stack again and repeat the operation above. -
Pager Beeping Time Setting: Press the call button and delete button at the same time on the keyboard, the display shows “F1”.
Press the number button “3”, the display shows “F3”. Press the call button to enter, the display shows “0”.
Press the number buttons to change the displayed number. When set to 0, the pager will keep beeping when called.
Number 1 means pagers will beep or shake for 1 second. 250 seconds is the maximum beeping / shaking time.
Take off one charging pager, and press the call button within 5 seconds. If the pager flashes and beeps, it is successful.
Press delete button to exit. If failed, need to put the pager back on top of the charging stack again and repeat the operation above. -
Pager Beeping Speed Setting: Press the call button and delete button at the same time on the keyboard, the display shows “F1”.
Press the number button “4”, the display shows “F4”. Press the call button to enter, the screen displays “0”.
Press the number buttons to change the displayed number. 0 means no beep; number 1 to 3 are different pager beep speed.
Take off one charging pager, and press the call button within 5 seconds. If the pager flashes and beeps, it is successful.
Press delete button to exit. If failed, need to put the pager back on top of the charging stack again and repeat the operation above. -
Pager Shake Setting: Press the call button and delete button at the same time on the keyboard, the display shows “F1”.
Press the number button “5”, the display shows “F5”. Press the call button to enter, the screen displays “0”.
Press the number buttons to change the displayed number. 0 means no shake, and other numbers mean pager will shake when called.
Take off one charging pager, and press the call button within 5 seconds. If the pager flashes and beeps, it is successful.
Press delete button to exit. If failed, need to put the pager back on top of the charging stack again and repeat the operation above.
Note: 2 and more keyboards can call one pager. Need to change the keyboards’ ID to the same and pair with the pagers again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>