AGJ 813T Wireless Tour Guide System Rechargeable 1 Transmitter User Manual
- June 14, 2024
- AGJ
Table of Contents
813T & 813R
Operation Manual
813T Transmitter
Power On/Off: 3 options: LOCK/ON/OFF; After switching on the device, the
channels and battery bar will be shown on the display.
Mute Button: Press M, and display will show MUTE. Now the transmitter is
muted. Press the M again, and it will be in normal working state.
Charging LED Light: red light in charging; blue light: fully charged.
Channel Change: Press LEFT or RIGHT button below CHANNEL to change the
transmitter channel. When the switch button is on LOCK, the channel can’t be
changed.
The button below “M”has no function.
Model: 813R Receiver
Change the Channel: Press the or button to change the channel after the device is switched on. When the switch button is on LOCK, the channel can’t be changed. When transmitter and receivers are in the same channel, receivers can hear the transmitter.
Change the Volume: Press + or – button to change the volume.
Make sure the headphone is plugged into the 3.5mm jack deep enough, so the
receiver can hear the transmitter.
Note : These products are one way wireless communication system. Widely
used in the simultaneous interpretation, tour guiding, teaching, training,
conferences, etc.
One transmitter can talk in one group to numerous receivers. The working
frequency is mainly UHF 794-806MHz in Asia, UHF 863-865MHz in Europe, and UHF
902-928MHz in North America. Only manufacturer can change the frequency.
The devices use rechargeable batteries. 813T transmitter can work 8 hours
continuously after full charge and 813R receiver can work 15 hours
continuously after full charge. Type-C cables can be used to charge the
devices. Wrong and violent plugging will damage the charging port in the
device. It will take 3 hours for full charge. When the devices are being
charged, the light will turn red. When they are fully charged, the light will
turn blue.
Manufacturer: Shanghai Biancheng Electronic Technology Co., Ltd.
Address: Building #C, 180 South Changjiang Road, Shanghai, China
TEL: +86 15921788065
Website: www.wirelesslinkx.com
Specifications
| Transmitter Parameters | Receiver Parameters |
|---|---|
| Frequency: 902-928MHz | Frequency: 902-928MHz |
| Number of channels: 26 | Number of channels: 26 |
| Channel interval: 1MHz | Channel interval: 1MHz |
| Battery: lithium polymer battery | Receiving sensitivity: -100dbm |
| Working current: 125mA | Working current 60mA |
| Charging current: 350mA | Charging current 350mA |
| Output interface: 3.5mm | Input interface: 3.5mm |
| Batters 3.7V / 1000mAH | Battery 3.7V / 1000mAH |
| Size: 86.54818mm | Size: 86.54818mm |
| Weight 55g | Weight: 55g |
| Distortion: <1% | Distortion: <1% |
| Frequency response range: 20Hz – 10KHz | Frequency response range: 20Hz – 10KHz |
| Working distance: 150 meters | Working distance: 150 meters |
| SNR(Signal to Noise Ratio): 100dB | SNR(Signal to Noise Ratio): 100dB |
| Battery life: 8 hours | Battery life: 15 hours |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>