LUDOMIDE Y1095-BK02 Ceiling Fans with Lights User Manual

LUDOMIDE Y1095-BK02 Ceiling Fans with Lights User Manual

https://youtu.be/wKLxJ9J0n3Ihttps://smartapp.tuya.com/tuyasmart

Contact Information

Please contact us with following information:

1. Screen shot of your order page, including product picture, name and order ID number.
2. Problem details with pictures / short video if possible.

Email: lightingcustomercare@gmail.comhttps://youtu.be/wKLxJ9J0n3I

Packing List

Note: Some parts may be assembled together in the package. 2

Installation kit

Note: Some extra hardware may be included. The quantity listed above is the number required for installation.

Safety Rules

1. Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
2. A qualified licensed electrician is required for the installation.
3. The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation) listed mounting boxes marked “FOR FAN SUPPORT”.
4. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
5. Do not operate reversing switch while fan blades are in motion (if applicable). Fan must be turned off and blades stopped before reversing blade direction.
6. Do not place any objects in the path of the blades.
7. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
8. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened soft cloth will be suitable for the cleaning.
9. After marking electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor on one side of the outlet box.
10. Electrical diagrams are reference only, different fan light may have different light shade and bulbs.
11. Use only our replacement parts. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

Warning:
To reduce the risk of personal injury, use only the two steel screws and washers provided with the outlet box for mounting to the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and need to be replaced, consult a qualified electrician if in doubt.

To reduce the risk of fire, electric shock or person injury, mount fan to outlet box marked “acceptable for fan support”.

To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.

Installation Preparation

Tools You Need

If mounting to a support structure, you will also need the optional tools.

What to Expect with Your Installation

Installation Step 1 (Mount the Bracket)

Installation Step 2 (Connect the Wires)

Installation Step 3 (Fix the Canopy)

1. Fix the bracket screws onto the bracket but not tighten them.
2. Align the “L” slots from the canopy to the screws on the bracket, rotate the canopy to lock it onto the bracket.
3. Tighten the screws.

Installation Step 4 (Install the Remote Holder)

1. Insert 2 batteries before using: AAA 1.5V battery x 2pcs (not included)
2. Install the remote holder onto the wall with screws.

Remote Control Instructions

NOTE: Please insert 2 batteries before using. AAA 1.5V battery x 2pcs (not included)

①: Turn off power.
②: non-functional
③⑤⑪⑫⑬⑭: Turn on the fan on 1/2/3/4/5/6 speed.
④: Turn off the fan.
⑩: Fan moves forwards or reversely.
⑥⑦: Adjust the brightness of the light.
⑮⑰: Adjust the light color temperature.
⑯: Turn on / off the light.
⑧⑱: 1H/2H for timing the fan.
⑨: Quick switch of the light color: warm white → cool white → daylight white.

REMOTE SIGNAL PAIRING: If the remote control looses signal of the fan, press and hold the button at the very beginning after it’s turned on from wall switch. After the fan light flashes or beeps, it’s done.

Tuya App Setup Step 1 (Download and Install the Tuya App)

Scan the QR code and install the APP in your phone, or search and install “Tuya” from Google Play, Apple App and other APP stores. Make sure your phone is connected to the internet and bluetooth enabled.https://smartapp.tuya.com/tuyasmart

Tuya App Setup Step 2 (Enter Pairing Mode)

There are two ways to enter pairing mode: using remote: press and hold the light temperature switch button for 5 seconds, when the light blinks or breathes, it indicates that the light has successfully entered pairing mode. OR Using wall switch: Turn the wall switch ON and OFF 9 times continuously, when the light blinks or breathes, it indicates that the light has successfully entered pairing mode.

Tuya App Setup Step 3 (Setup Your Fan with Tuya App)

Do not choose a 5G Hz WIFI network at your cell phone! This will result in the connection failure to Alexa or other smart devices. Please select a 2.4G Hz WIFI network. The step may vary due to app update. Follow the app instruction to complete the setup.

Tuya App Control Instructions

set up timers to turn lights and fans on and off, making your own schedule 12

Alexa Voice Control Setup

Please download the ALEXA app and sign in to your account before proceeding with the following steps

Alexa Voice Control Command

Google Home Control Setup

Please download the Google Home app and sign in to your account before proceeding with the following steps

Google Home Control Command

Trouble Shooting

1. Fan doesn’t work · Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
   · Check the remote control battery (not included in this package).
   · Check the circuit breaker to ensure the power is on.
   · Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.

2. Lights Do Not Light Up / Flicker / Noisy Operation
   · Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
   · Check your power and switch to make sure it’s power on.

3. Noisy Operation
   · Re-tighten all screws on bracket.
   · Check to see if any of the blades are cracked. If so, replace the blades.

4. Remote does not work
   · Make sure the battery is installed correctly.
   · Pair the remote control again (See page 9).
   · Install 2 new batteries.

Clean And Care

To clean, wipe the fixture with soft cloth. Spray from chemical cleaners can discolour the finish of the fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.

Ordering Parts

Keep this manual for future reference, and in case replacement parts are needed. Available parts can be ordered from place of purchase. Use exact wording from diagrams when ordering parts.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>