AGJ BCT-6811 Restaurant Pager Wireless Calling System User Manual

AGJ BCT-6811 Restaurant Pager Wireless Calling System

Product Information

Specifications:

• Pager dimension: 5110611mm
• Pager material: ABS
• Receiving sensitivity: -114dB
• Standby time: Approximately 24 hours
• Pager battery: Built-in 3.7V 150mAh rechargeable lithium battery
• Pager frequency: 433MHz
• Reminding method: Ring, shake, and flash
• Distance of transmission: About 300 meters in an open area
• Protection level: IP32
• Brand: AGJ/BCITY

Product Usage Instructions

Keypad ID Setting:

1. Press CALL and DEL at the same time.
2. The display will show F1. Press 1.
3. Press CALL, and the display will show the current ID of the keypad.
4. Input a number from 001-999 to change the keypad ID.
5. Press CALL again to save, and press DEL to finish.
6. Do not change the keypad ID unless necessary, as it will require re-pairing all the pagers to work.
7. Note: Keypad ID can’t be set to 00.

Mute the Pager:

1. All pagers must be in the charging slot of the charging base.
2. Press CALL and DEL at the same time.
3. The display will show F1. Press 3.
4. Press CALL, and the display will show 01.
5. Input 0 or 1 from the keyboard. 0 means turning off the ringing of the pager. 1 means turning on the ringing of the pager.
6. Press CALL to save and press DEL to finish.

Pager Ringing Time Setting:

1. All pagers must be in the charging slot of the charging base.
2. Press CALL and DEL at the same time.
3. The display will show F1. Press 4 and CALL.
4. The display will show 01.
5. Input a number from 1 to 99 from the keyboard. 1 means 1 second. 99 means 99 seconds.
6. Press CALL to save and press DEL to finish.

Frequently Asked Questions (FAQ)

• Can I change the keypad ID?
• Yes, you can change the keypad ID by following the instructions provided above. However, note that changing the keypad ID will  require re-pairing all the pagers to work.
• How do I mute the pager?
• To mute the pager, ensure all pagers are in the charging slot of the charging base. Then, follow the instructions provided above to turn off the ringing of the pager.
• How do I set the pager ringing time?
• To set the pager ringing time, ensure all pagers are in the charging slot of the charging base. Then, follow the instructions provided above to specify the desired ringing time.

Product List

Pager

lithium battery

Pager frequency| 433MHz
Reminding method| Ring, shake and flash
Distance of transmission| About 300 meters in an open area
Protection level| IP32
Brand| AGJ/BCITY

Keypad

Output: DC 12V, 2A

---|---

Instructions

1. Charging:
   Before using, please connect the charging base to power, and put the pagers in the charging slot for 5 minutes to charge.

2. Switch on pager:

   • Connect the charging base to power.
   • And put the pagers in the charging slots. Pagers will be switched on automatically.

3. Switch off pager:

   • Connect the charging base to power, and put the pagers in the charging slots.
   • Input 999 in the keypad and call all pagers. And all pagers will be switched off. Pagers need to be paired with keyboard transmitter first.

4. Keypad ID setting:

   • Press CALL and DEL at the same time, and the display will show F1.
   • Press 1, and press CALL, and the display will show the current ID of the keypad. Input a number from 001-999 to change the keypad ID.
   • Press CALL again to save, and press DEL to finish. And the display will show — . Try not to change the keypad ID. When the ID is changed, all the pagers need to be paired again to work. Keypad ID can’t be 00.

5. Pager number setting:
   There can only be one pager pluged in the charger when pairing the pager. The pager must be flashing.

   • Press CALL and DEL at the same time, and the display will show F1.
   • Press 2, and press CALL. The display will show 01.
   • Within 3 seconds, input a number from 001 to 998 and press CALL.
   • If the pager flashes, the operation is successful. And now change another pager’ ID.
   • After all, press DEL to finish. And the display will show — . The pager ID can’t be 999. 999 is shut-off function. Repeat procedures above to change all pager’s ID.

6. Mute the pager:
   All pagers must be in the charging slot of the charging base.

   • Press CALL and DEL at the same time, and the display will show F1.
   • Press 3, and press CALL. The display will show 01. Input 0 or 1 from the keyboard 0 means turning off the ringing of the pager. 1 means turning on the ringing of the pager.
   • Press CALL to save and press DEL to finish.

7. Pager ringing time setting:
   All pagers must be in the charging slot of the charging base.

   • Press CALL and DEL at the same time, and the display will show F1.
   • Press 4 and CALL. The display will show 01. Input a number from 1 to 99 from the keyboard. 1 means 1 second. 99 means 99 seconds.
   • Press CALL to save and press DEL to finish.

Keypad Information

• Keypad dimension: 15127835mm
• Keypad material: ABS
• Transmitting power: 240mW
• Keypad frequency: 433MHz
• Power adapter:
  • Input: AC 100-240V, 50/60Hz
  • Output: DC 12V, 2A
• Keypress method: Touch type
• Modulation: AM
• Model: BCT-6811
• Website: wirelesslinkx.com

References

• Tour guide system, Wireless tour guide system, Pager system, Wireless calling system, Pager – WirelessLinkx

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>