AGJ 911S Restaurant Pager System Instructions
- June 15, 2024
- AGJ
Table of Contents
911S Restaurant Pager System
Instructions
Product List
| Pager | Keypad |
|---|---|
| Pager dimension | 1065111mm |
| Pager material | ABS |
| Receiving sensitivity | -114dB |
| Standby time | Approximately 20 hours |
| Pager battery | Built-in 3.7V 150mAh rechargeable lithium battery |
| adapter | Input: AC 100-240V, 50/60Hz |
Output: DC 12V, 1A
Pager frequency| 433MHz
Reminding method| Ring and flash| Keypress method| Touch type
Distance of transmission| About 300 meters in a wide-open field| Modulation|
AM
CE S/N Number| GZ190812107ER| Supplier| Shanghai Biancheng Electronic
Technology Co., Ltd.
Brand| BCITY / AGJ
Business Registration| 91310110057651023Y| Model Name| 911S
Instructions
-
Charging: Before using, please connect the charging base to power, and put the pagers in the charging slot for 5 minutes to charge.
-
Switch on pager: Connect the charging base to power.
And put the pagers in the charging slots. Pagers will be switched on automatically. -
Switch off pager: Connect the charging base to power, and put the pagers in the charging slots.
Input 99 or 999 in the keypad and call all pagers.
And all pagers will be switched off. Pagers need to be paired with keyboard transmitter first. -
Keypad ID setting: Press CALL and DEL at the same time, and the display will show F1. Press 1, and press CALL, and the display will show the current ID of the keypad. Input a number from 001-999 to change the keypad ID. Press CALL again to save, and press DEL to exit.
And the display will show — . Try not to change the keypad ID. When the ID is changed, all the pagers need to be paired again to work. Keypad ID can’t be -
Pager number setting: There can only be one pager pluged in the charger when pairing the pager. The pager must be flashing. Press CALL and DEL at the same time, and the display will show F1. Press 2, and press CALL. The display will show 01.
Within 3 seconds, input a number from 001 to 998 and press CALL.
If the pager flashes, the operation is successful. And now change another pager’ ID.
After all, press DEL to finish. And the display will show — . Pager ID can’t be 99 or 999.
99 and 999 are shut-off function. Repeat procedures above to change all pager’s ID. -
Mute the pager: Press CALL and DEL at the same time, and the display will show F1.
Press 3, and press CALL. The display will show 01. Input 0 or 1 from the keyboard.
0 means turning off the ringing of the pager. 1 means turning on the ringing of the pager.
Press CALL to save and press DEL to finish. -
Pager ringing time setting: Press CALL and DEL at the same time, and the display will show F1.
Press 4 and CALL. The display will show 01. Input a number from 1 to 99 from the keyboard.
1 mean 1 second. 99 means 99 seconds. Press CALL to save and press DEL to finish.
All the pagers need to be paired with the transmitter again to have new ringing time.
Note: 2 and more keyboards can call one pager. Need to change the
keyboards’ ID to the same ID number.
And pair the pagers whose keyboard ID is changed with its keyboard again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>