PROAIM P-JS Heavy Duty Stand for Camera Jib Crane User Manual
- June 17, 2024
- PROAIM
Table of Contents
Heavy-Duty Stand for Camera Jib Crane
(P-JS)
Assembly Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Proaim Heavy-Duty Stand for Camera Jib Crane
Heavy-Duty Stand Setup
- Loosen the knob of the Heavy Duty Stand and spread its legs on the floor (as per your requirement) then tighten the knob back.
NOTE: The Tripod itself has sturdy rubber feet, so you can stably use it on hard or slippery surfaces. NOTE: The Stand has sections to adjust the height with quick & secure locking knobs. The central main post of the stand is adjustable, through which you can change its height as you require. The stand has a quick-lock mechanism that lets you adjust the Tripod’s height and balance it within seconds. ![PROAIM P-JS Heavy Duty Stand for Camera Jib Crane
-
Heavy-Duty Stand Setup 2](https://manuals.plus/wp- content/uploads/2024/02/PROAIM-P-JS-Heavy-Duty-Stand-for-Camera-Jib-Crane- Heavy-Duty-Stand-Setup-2.png)
- Mount the Center Post (Not Included) of the Jib onto the Stand and tighten the knob to secure it.
NOTE: The Jib stand has adjustable height from 51″ to 83″ and can be easily adjusted to capture the perfect perspective.
-
Open the shank from the central post (Not Included). Leave the black washers at one side.
-
Then insert the end of this section (Not Included). Inside the Center Post and align the holes of the section with the central post to screw in the shank.
-
Similarly, insert the black washers onto the other side and push the shank towards the other side in order to tighten the shank with the dome nut.
-
Use Wrench tool to tighten the dome nut fromboth sides to secure the Jib Sections(Not Included).
-
The Middle section (Not Included) has connecting bars attached to both the ends.
Slide the bars of Middle section into the slotson Front section & tighten both the sectionstogether using the provided Allen Key. -
Assembly is complete now setup is ready to use.
YOUR PROAIM HEAVY-DUTY STAND FOR CAMERA JIB CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of
purchase. Within this period of time, we will repair it without charge for
labor or parts. Warranty doesn’t cover transportation costs nor does it cover
a product subjected to misuse or accidental damage. Warranty repairs are
subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system,
or transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>