JVC XS-E622B Portable Speaker Instruction Manual

JVC XS-E622B Portable Speaker

INTRODUCTION

Thank you for buying our product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference.

IMPORTANT SAFETY PRECAUTIONS

When using your Speaker, basic safety precautions should always be followed, including the following:

• Children should be supervised to ensure that they do not play with the device.
• Keep this Speaker and its accessories away from excessive heat.
• No sharp object should be subjected to the speaker/speaker drivers as it may damage the speakers.
• Only use a soft cloth, no harsh abrasives or chemicals to clean, as it may damage the surface finishing.
• Keep away from dripping or splashed fluids.
• Ensure the speaker is waterproof by removing all the connected cables and the cap is tightly closed before exposing the speaker to liquid.
• NEVER expose the speaker to water while charging, as doing so may result in damage to the speaker or the power source.
• NEVER operate this speaker with a damaged cable or after it has malfunctioned or has been damaged in any manner.
• NEVER leave the speaker unattended while charging. If the speaker becomes hot, smokes, or gives off an odor during charging, terminate charging immediately.

To avoid danger of suffocation, keep the plastic bag away from babies and children.
Do not use this bag in cribs, beds, carriages or playpens. This bag is not a toy

PRODUCT OVERVIEW AND CONTROL BUTTONS

1. button
   Press to start/pause playback in Bluetooth mode.
   Press to mute or resume the sound in AUX IN mode.

2. button
   Press to decrease the volume.
   Long press to skip to the previous track.

3. button
   Press to increase the volume.
   Long press to skip to the next track.

4. button
   Long press to turn on/off the speaker.
   Press to change mode (Bluetooth / AUX IN).

5. LED indicator

6. Charging indicator

7. USB-C charging port

8. AUX IN input

9. RESET hole
   If the speaker does not turn off or respond, short-press the
   RESET button with a small round pin to reset the speaker.

CHARGING

Before first-time use, fully charge the built-in battery. The charger is not included in the package, please charge the speaker via a standard 5 V / 2 A charger or via a PC.

NOTE: When the battery charge < 3% the speaker will power off automatically

IMPORTANT: Please make a complete charge every three months to avoid shortening the battery lifespan.

BLUETOOTH

• Long press the button to turn on the speaker. The LED indicator will flash white and hear a tone. The speaker is in pairing mode.
• Activate Bluetooth of mobile phone and search for device name “XS-E622B” then connect it. If the pairing is successful, the LED indicator will be solid white.

NOTE: The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired.

Disconnecting the paired mobile phone

• Press the and buttons simultaneously to disconnect the current device. The LED indicator will flash white and the speaker will be in pairing mode.

HANDS-FREE FUNCTION

When phone or other smartphone is connected to your speaker, follow the steps below to take calls hands-free.

• Press the button to pick up the call.
• Long press the button to reject the call.
• During a call, press the button to hang up the call.

TWS (TRUE WIRELESS STEREO)\

The TWS technology enables you to use two speakers pairing via Bluetooth to create a wireless dual-channel system to deliver true stereo sound effect

• Turn on both speakers. Make sure both speakers are without any Bluetooth connection.
• Double press the button on one of the speakers and the LED indicator will flash quickly, the second speaker will connect automatically.
• The first speaker LED indicator flashes and the LED indicator of the second one keeps solid, which means both speakers are connected successfully
• Pair your mobile phone with the first speaker, the LED indicator of both speakers will be solid white.

Disconnect the TWS connection

Double press the button to disconnect the TWS connection. The
LED indicator will flash and the speakers will be in pairing mode.

AUX IN

The speaker automatically switches to AUX IN mode when you connect your device with the audio cable (included). When using an external device, all functions can only be controlled by the external device.
NOTE: The LED indicator will be solid white after connection and during playback.

SPECIFICATION

Package Contents: Portable Bluetooth speaker, Leather Strap, Charging cable, Audio cable, User manual

We reserve the right to change technical specifications.

WARRANTY

Our product is warranted for 2 full year from the date of purchase. The warranty is provided on all material defects and workmanship. Guarantee of 24 months does not apply to decrease in the accumulator’s effective capacity caused by its use or age. Effective capacity gradually decreases depending on the method of use of the accumulator.

Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Hereby, ETA a.s. declares that the radio equipment type JVCXSE622B is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.JVCAUDIO.cz/doc

The Bluetooth® word mark and logo are registered trademark owned by Bluetooth SIG, Inc. and any use of such marks Shenzhen Weiking Technology Co.,Ltd, is under license. Other trademarks and trade names are those of their respective owners.

This product is manufactured and distributed exclusively by ETA a.s., serviced and warranted by its designated partner.
“JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license.

References

• Declaration of Conformity | | jvcaudio.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>