msi RadiX AXE6600 WiFi 6E Tri-Band Gaming Router User Guide
- June 9, 2024
- MSI
Table of Contents
RadiX AXE6600
WiFi 6E Tri-Band Gaming Router GRAXE66 Quick Start Guide
Product Overview
Package contents
- RadiX AXE6600 WiFi 6E Tri-Band Gaming Router
- Ethernet cable
- Power adapter (The plug type varies by country or region)
Adaptor Installation
- Align the power connector with the latch on the power adapter.
- Push it all the way down. Make sure you hear a “click” sound.
Dragon Shield Button and Antenna Lighting
| Mode | Status |
|---|---|
| Default | Steady Red |
| Al Auto | Breathing Aqua |
| Gaming | Breathing Red |
| Streaming | Breathing Purple |
| WFH | Breathing Blue |
| Traditional QoS | Breathing Orange |
a In order to use the Dragon Shield button, the AI QoS and Traditional QoS
functions need to be enabled.
b Press the Dragon Shield button to change the AI QoS mode. The light color
will change as shown in the table above.
c The Dragon Shield button can be pressed for 2 seconds to turn the lights
on/off in both the antennas and the Dragon Shield.
Hardware Installation
- Turn off or unplug the power from the cable/DSL modem.
- Connect the modem to the LAN 1 port on your MSI router with an Ethernet cable.
- Power on or plug in the modem to power. Check that the modem is properly functioning per its manufacturer’s instructions.
- Connect your MSI router to power by plugging the power adapter to the DC IN jack.
- Press the power button and the power LED lights on will turn on. Configure the initial setup with either Option A or Option B as directed in this Quick Start Guide.
Option A
Initial Setup with PC / Laptop
- Connect your PC or laptop to the router with either a wired or wireless connection.
- Open a web browser and go to http://msirouter.login
Option B
Initial Setup with Mobile Phone / Tablet
https://www.msi.com/redirect/app/MSI-Router
6 Download the MSI router app from Google Play Store or App Store.
7 Launch the MSI router app and scan the QR code on the label of your router to connect to it via WiFi connection.
Follow the on-screen instructions to complete network settings.
Switching 2.5G port to LAN (Optional)
The default 2.5G WAN port can be reconfigured as LAN to connect to a modem.
Doing so will reconfigure the LAN 1 port to WAN.
Log in to the MSI Router web utility. Then, go to Advanced > WAN.
Then, select 1 Gbps to set the LAN 1 port as WAN. The 2.5G port will
automatically switch to LAN.
Regulatory Statements
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the equipment.
The availability of some specific channels and / or operational frequency
bands are country dependent and are firmware programmed at factory to match
the intended destination. The firmware setting is not accessible by the end
user. FCC regulations restrict the operation of this device to indoor use
only.
The operation of this device is prohibited on oil platforms, cars, trains,
boats, and aircraft, except that operation of this device is permitted in
large aircraft while flying above 10,000 feet. Operation of transmitters in
the 5.925-7.125 GHz band is prohibited for control of or communications with
unmanned aircraft systems.
RF Exposure Information
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 25 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter.
End-users and installers must be provide with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.
Canada Compliance Statement
Industry Canada Equipment Standard for Digital Equipment (ICES) –Canada
Compliance Statement
This Class B digital apparatus complies with Canadian ICES_003.
CAN ICES-003 (B)/NMB-003(B)
Innovation, Science and Economic Development Canada(ISED) Compliance
Statement
This device complies with ISED’s licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Caution:
User should also be advised that:
(i) the device for operation in the band 51505250 MHz is only for indoor use
to reduce the potential for harmful interference to co channel mobile
satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250_5350 MHz
and 5470_5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725_5825 MHz
shall comply with the e.i.r.p. limits specified for point_to_point and non
point_to_point operation as appropriate.
High_power radars are allocated as primary users (i.e. priority users) of the
bands 5250_5350 MHz and 5650_5850 MHz and that these radars could cause
interference and/or damage to LE_LAN devices.
The operation of this device to indoor use only.
The operation of this device is prohibited on oil platforms, cars, trains,
boats, and aircraft, except that operation of this device is permitted in
large aircraft while flying above 10,000 feet.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation,
Science and Economic Development Canada (ISED) radio frequency exposure
limits. The Wireless Device should be used in such a manner such that the
potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the ISED RF
Exposure limits under mobile exposure conditions. (antennas are greater than
25 cm from a person’s body).
CE RED Compliance Statement
EU Simplified Declaration of Conformity
Hereby, msi Inc. declares that the radio equipment type GRAXE66 is in
compliance with Directive 2014/53/EU.
The full text of the EU Declaration of conformity is available at the
following internet address: https://www.msi.com/support
The device is restricted to indoor use only when operating in the 5150 to 5350
MHz & 5945 to 6425 MHz frequency range applicable in countries that support
WiFi 6E.
RF Exposure Information
This equipment should be installed and operated with minimum distance 25 cm
between the radiator & your body.
RED RF Output Power:
| Technologies | Frequency range (MHz) | Max. Output Power(EIRP) dBm |
|---|---|---|
| WLAN 2.4 GHz | 2400-2472 MHz | 20 |
| WLAN 5 GHz | 5150-5250 MHz | 23 |
| WLAN 5 GHz | 5250-5350 MHz | 23 |
| WLAN 5 GHz | 5470-5725 MHz | 30 |
| WLAN 6 GHz | 6115-6425 MHz | 23 |
UKCA Compliance Statement
** UKCA Simplified Declaration of Conformity
Hereby, msi Inc declares that the radio equipment type GRAXE66 is in
compliance with the essential requirements and other relevant provisions of
the Radio Equipment Regulations 2017. The full text of the UK Declaration of
Conformity may be found at the following internet address:
https://www.msi.com/support
** The device is restricted to indoor use only when operating in the 5150 to
5350 MHz & 5925~6425 MHz frequency range.
RF Exposure Information
This equipment should be installed and operated with minimum distance 25 cm
between the radiator & your body.
|
---|---
IMPORTANT NOTE
For more information about your router, you can download the user manual from
https://www.msi.com/support
Safety Instructions
Read the safety instructions carefully and thoroughly. All cautions and
warnings on the equipment or user’s manual should be noted.
- Do not leave the Router in an unconditioned environment with a storage temperature above 60ºC (140ºF) or below 0ºC (32ºF), which may damage the router.
- This router should be operated under maximum ambient temperature of 35ºC (95ºF).
Power and Operating/Storage Specifications
| DC Power adapter | DC Output: + 12V with Max 3.5A current |
|---|---|
| Temperature | Humidity |
| Operating | 0 – 40°C |
| Storage | 0 – 70°C |
FAQ
For more information about your router, you can download theuser manual from
https://www.msi.com.
Micro-Star International Co., Ltd.
No. 69, Lide St., Zhonghe Dist., New Taipei City 235, Taiwan
tel: +886-2-3234-5599
fax: +886-2-3234-5488
www.msi.com
MSI-Europe: Eindhoven 5706 5692 ER Son.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>