SWIT S-3602U DV Charger Adapter User Manual
- June 17, 2024
- SWIT
Table of Contents
S-3602U
DV Charger/ Adaptor
Ver: B
USER MANUAL
SWIT Electronics Co.,LTD.
S-3602U DV Charger Adapter
Congratulations on your purchase of this product. Please read this user manual carefully.
Warning
Keep in mind the following considerations to avoid fire or shock hazard!
- Never expose the charger to rain or moisture. + Never disassemble the charger, please contact the local agent for repair.
- Never use metal or other conductive objects to touch the inside of the charger.
- Never short-circuit the charging terminals with metal objects.
- Never connect to a power supply beyond the voltage range of the charger.
Caution
- Charge the compatible batteries only.
- Keep the electrodes clean and ensure the reliable connection.
- Use the supplied AC power cord to avoid any damages.
- The charger will get heating normally during use.
- Do not cover the heat dissipation vent.
- Do not place the charger in unstable place which may cause damage by falling.
- Keep the charger in a cool and dry place.
Feature
- 2-channel independent power supply and control system, capable of charging two batteries simultaneously.
- AC-DC X1 adapting output with automatic identification function; 2-channel charging will stop automatically when adapting output.
Specifications
| Model | S-3602U |
|---|---|
| Power input | 100 ∼ 240V, 50/60Hz |
| Power consumption | 60W |
| Adapting output | DC 12.7V ****3.5A |
| Charging output | DC 16.8V ****2Ax2 |
| Compatible battery | SWIT LB-SU series ;SONY BP-U series |
| Dimensions | 136x110x53mm |
| Dimensions with package (DC Cable included) | 185x137x67mm |
| Net weight | 380g |
| Weight with package (DC Cable included) | 580g |
| Working Temperature | 0°C ∼ 40°C |
| Working Humidity | 10WoRH ∼ 90%RH |
Appearance
- Battery charging slot
- Charging indicator
- Adapting output socket
- Adapting output indicator
- Power indicator
- Power input socket
LED charging indicator instruction
| Indicator Status | Status Instruction |
|---|---|
| 25% | 50% |
| Off | Off |
| Flash | Off |
| On | Flash |
| On | On |
| On | On |
| On | On |
Charging
- Connect the adaptor to the power socket with the power cord. The power indicator will light up.
- Mount the batteries onto the charging slot as shown in the diagram; the charger can charge two batteries simultaneously and the charging LED indicators will start to flash and display the real-time battery capacity level (25%, 50%, 75% and 100%).
When the battery is fully charged, all the 4 LEDs will light up, indicating the battery can be removed for use.
Note: Only charge the compatible batteries. Charging other batteries may cause danger due to incompatibilif
Adapting output
- The charger has a DC adapting output socket, which can power the camera via a DC to DC cable.
- When the charger is used for adapting output, the battery charging stops automatically, and the adapting output indicator lights up.
Common problems and solutions
Description of the phenomenon| Possible causes of the problem|
Solutions
---|---|---
Adaptor output cannot power the device| Charging adapter power not connected
or not reliably connected| Reliable access to power
Higher power of access equipment| Check the power of the access device, it
should meet the adapter output requirements
Battery indicator does not light up| Charging adapter power not connected or
not reliably connected| Reliable access to power
Battery contact failure| unplug and re-plug
Charging channel electrode port damaged| Check whether the electrode port of
the charging channel is damaged, if it is damaged, stop using the charger
immediately
Charging incompatible batteries| Use compatible batteries in the
[Specifications] section.
Adapted outputs have wiring plugged in| Unplug the wires from the adapter
outputs.
Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: [email protected]