ABB 1500VA 11 LI Up UPS PowerValue User Manual

June 17, 2024
ABB

ABB 1500VA 11 LI Up UPS PowerValue User Manual

ABB 1500VA 11 LI Up UPS PowerValue User Manual

Important safety instructions

THIS CHAPTER CONTAINS IMPORTANT SAFETY INSTRUCTIONS. READ IT CAREFULLY BEFORE STARTING DISASSEMBLING THE UNIT.

1.1. Symbols and warnings

The following symbols are used in this manual, the list below explains each symbol.

ABB 1500VA 11 LI Up UPS PowerValue - Symbols and
warnings

1.2. Safety rules

ABB 1500VA 11 LI Up UPS PowerValue - Safety rules

Introduction

2.1. Related to the document
The document contains information for end of life recyclers or treatment facilities in accordance with the EU Directive 2012/19/EU about waste electrical and electronic equipment (WEEE). Necessary dismantling information are detailed, together with indication of WEEE materials and components requiring selective treatment are located.

Substances of very high concern under Regulation (EC) No 1907/2006* are typically used but not reported in this document: contact ABB to get the latest declaration available.

  • Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).

2.2. Applicability
This document covers the environmental information of the following products:

ABB 1500VA 11 LI Up UPS PowerValue - Applicability

2.3. Target audience
This document is intended for ABB customers and for professional recyclers. “Professional” refers to the expertise in implementing selective treatment according local National laws. That includes also the un- derstanding of immediate or long term safety risks related to exposure to substances.

2.4. Disclaimer
The information presented in this publication does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequences of its use. Publication thereof does not convey nor imply any license under patent – or other industrial or intellectual – property rights.

Recycling advice

The following table is intended to guide selective treatment and recycling, showing where which substances of concern are used and where they are located [ref. Directive 2012/19/EU Article 15 and Annex VII].

Substances of very high concern under Regulation (EC) No 1907/2006(1) are typically used but not reported in this document due to changing nature: contact ABB to get the latest declaration available.

(1) Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).

ABB 1500VA 11 LI Up UPS PowerValue - Recycling advice

(2) due to assembly complexity and where-used indication, the location of these substances or material will not be indicated along the document, unless considered necessary.

Other materials and components, when not indicated above:

ABB 1500VA 11 LI Up UPS PowerValue - Other materials and components, when
not indicated above

The following electrical components require further separation after removal from UPS. They might contain materials or components requiring selective disposal. Contact the manufacturer to get proper instructions:

  • 50Hz Transformer;
  • fan.

Dismantling and recycling instructions

ABB 1500VA 11 LI Up UPS PowerValue - Dismantling and recycling
instructions

This section describes the procedure to follow for disassembly. At the end of each subsections, relevant
WEEE or recycling information are reported.

Remove the UPS from the carton box and make sure it’s powered off.

UPS is delivered with external cables requiring selective disposal.

ABB 1500VA 11 LI Up UPS PowerValue - Figure 4.1

Figure 4-1: External cables provided

Make sure UPS is powered off the UPS.

ABB 1500VA 11 LI Up UPS PowerValue - Make sure UPS is powered off the
UPS

Steps for 600VA/800VA

  1. Loosen the screws that hold the bottom battery panel (A).
  2. Remove the bottom battery panel (A).
  3. Swipe out the battery (B).
  4. Disconnect the battery wires (Error! Reference source not found.).

ABB 1500VA 11 LI Up UPS PowerValue - Figure 4.2

Figure 4-2: Remove the battery (600VA/800VA)

Steps for 1000VA/1500VA/2000VA

  1. Loosen the screws that hold the bottom battery panel (A).
  2. Remove the bottom battery panel (A).
  3. Swipe out the first battery (B2).
  4. Remove the two supports (D1 and D2).
  5. Swipe out the second battery (B1).
  6. Disconnect the batteries wires (C)

ABB 1500VA 11 LI Up UPS PowerValue - Figure 4.3

Figure 4-3: Remove the battery (1000VA/1500VA/2000VA)

Remove all the screws on the base, opening the cover (Error! Reference source not found.

ABB 1500VA 11 LI Up UPS PowerValue - Figure 4.4

Documents / Resources

| ABB 1500VA 11 LI Up UPS PowerValue [pdf] User Manual
1500VA 11 LI Up UPS PowerValue, 1500VA 11 LI, Up UPS PowerValue, UPS PowerValue, PowerValue
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals