3M Tegaderm PICC and Midline Dressing 1650 Instruction Manual
- June 17, 2024
- 3M
Table of Contents
3M Tegaderm PICC and Midline Dressing 1650
Product Information
3MTM TegadermTM PICC and Midline Dressing (1650)
The 3MTM TegadermTM PICC and Midline Dressing is a transparent I.V.
dressing with securing tape designed specifically for PICC (Peripherally
Inserted Central Catheter) and Midlines. It provides a protective barrier for
the catheter insertion site, ensuring secure and comfortable placement.
Specifications
- Product Name: 3MTM TegadermTM PICC and Midline Dressing (1650)
- Type: Transparent I.V. Dressing with Securing Tape
- Intended Use: For PICC and Midlines
Product Usage Instructions
Application Instructions
- Carefully remove the recording label.
- Peel open the package and take out the sterile dressing.
- Peel one sterile pre-cut tape strip off the backing.
- Secure the line close to the insertion site to prevent dislodgement of the catheter.
- Use the other sterile pre-cut tape strip to secure the catheter hub.
- Remove the paper backing from the dressing to expose the adhesive surface.
- Separate the soft cloth tape section and gently peel it back toward the insertion site, to the transparent section, while supporting the line.
- Alternately stretch and release the transparent film section parallel to the skin to break the adhesive bond.
- Position the transparent section of the dressing over the insertion site, ensuring it is centered, while holding the reinforced sections of the dressing.
- Press the transparent section firmly into place.
- Slightly overlap the reinforced soft cloth sections around the catheter port and underneath the hub.
- Seal the dressing around the catheter by applying firm pressure and smoothing from the center outwards.
- Remove the paper frame and smooth the dressing edges to increase adhesion.
Removal Instructions
- Support the skin and firmly hold the catheter during dressing removal to prevent disturbance of the catheter in the vein.
- Carefully remove the two tape strips, starting with the one supporting the catheter hub.
FAQ (Frequently Asked Questions)
-
Q: How often should I change the dressing?
A: The recommended frequency for changing the dressing is every 7 days or as advised by your healthcare professional. However, if the dressing becomes soiled, loose, or damaged, it should be replaced immediately. -
Q: Can I take a shower or bath with the dressing on?
A: Yes, the 3MTM TegadermTM PICC and Midline Dressing is waterproof and allows you to take showers or baths without compromising its adhesion or integrity. However, avoid excessive rubbing or scrubbing of the dressing during bathing. -
Q: Can I cut the dressing to fit smaller catheter sites?
A: No, it is not recommended to cut the dressing as it may compromise its performance and increase the risk of contamination. Always select a dressing size that adequately covers the entire insertion site.
3M™ Tegaderm™ PICC and Midline Dressing (1650) Transparent I.V. Dressing with Securing Tape for PICC and Midlines
Application Instructions
- Peel open the package and remove the sterile dressing. Peel one sterile pre-cut tape strip off the backing.
- Secure the line close to the insertion site so that a sudden movement will not dislodge the catheter.
- Use the other sterile pre-cut tape strip to secure the catheter hub.
- Remove paper backing from the dressing to expose the adhesive surface.
- Position the transparent section of the dressing so that it is centered over the insertion site while holding the reinforced sections of the dressing. Press the transparent section firmly into place.
- Slightly overlap the reinforced soft cloth sections around the catheter port and underneath the hub. Seal the dressing around the catheter by applying firm pressure to the dressing and smoothing from the centre outwards. Remove paper frame and smooth dressing edges to increase adhesion.
- Record information on label and use it as a third securing strip on the catheter hub.
- 3M Health Care
- 3M House
- Morley Street Loughborough Leicestershire LE11 1EP
- Tel: (01509) 611611
- Fax: (01509) 613326
- 3M Ireland
- 3M Ireland Limited
- The Iveagh Building
- The Park, Carrickmines Dublin 18, Ireland
- Tel : 00 353 (01) 280 3555
- Fax: 00 353 (01) 280 3509
Removal Instructions
- Carefully remove recording label
- Separate soft cloth tape section and gently peel back toward the insertion site, to the transparent section while supporting the line
- Alternately stretch and release the transparent film section parallel to the skin to break the adhesive bond
- Support the skin and firmly hold the catheter during dressing removal to prevent disturbance of the catheter in the vein
- Carefully remove the two tape strips starting with the one supporting the catheter hub
3M and Tegaderm are trademarks of the 3M Company © 3M Health Care Limited 2009.