Aladdin MDSLP Meal Delivery Carts Instruction Manual

Aladdin MDSLP Meal Delivery Carts

Product Information

Specifications:

• Model: MDSLP, MDELP, MDRS Series
• Material: Durable sanitary stainless steel
• Tray Capacity: Varies based on model (see table below)
• Number of Doors: Varies based on model (see table below)
• Dimensions: Varies based on model (see table below)

Product Usage Instructions

Introduction
Aladdin’s versatile Meal Delivery Carts are designed to efficiently transport meal trays. The carts are available in various capacities to meet your delivery needs. The MDSLP and MDRS models can accommodate two trays per shelf, side-loaded, while the MDELP models can accommodate a single tray per shelf, end-loaded. The carts are constructed with 18 gauge stainless steel for durability and feature sound-dampening insulation on the doors. They are designed to provide years of trouble-free meal delivery service.

Receiving Inspections
Your Aladdin Meal Delivery Carts are factory-tested for performance and are free from defects when shipped. To ensure that no damage has occurred during transit, carefully inspect the cart upon receipt. If any damage is detected, please follow the damaged goods policy outlined below:

1. Contact Aladdin Temp-Rite to obtain written permission (return authorization) before returning a damaged unit.
2. Report any claims of damage to Aladdin within ten (10) business days from receipt of shipment to be eligible for credit.

Safety
Ensure proper safety precautions are taken when using the Meal Delivery Carts. Follow all guidelines and instructions outlined in the user manual to prevent accidents or injuries.

Installation
Refer to the Installation section of the user manual for detailed instructions on how to install the Meal Delivery Carts.

Operation
Follow the steps provided in the Operation section of the user manual to correctly operate the Meal Delivery Carts.

Towing
If towing the Meal Delivery Carts is required, refer to the Towing section of the user manual for instructions on how to safely tow the carts.

Cleaning / Maintenance
Maintain the cleanliness and performance of the Meal Delivery Carts by following the cleaning and maintenance guidelines provided in the user manual.

Troubleshooting
If you encounter any issues or problems with the Meal Delivery Carts, refer to the Troubleshooting section of the user manual for possible solutions.

Parts List
For a comprehensive list of parts included with the Meal Delivery Carts, refer to the Parts List section of the user manual.

Warranty & Liability
Details regarding the warranty and liability coverage for the Meal Delivery Carts can be found in the Warranty & Liability section of the user manual.

FAQ:

• Q: How many trays can each model of the Meal Delivery Carts accommodate?
  A: The tray capacity varies based on the model. Refer to the specifications table below for more information.

• Q: What are the dimensions of the Meal Delivery Carts?
  A: The dimensions vary based on the model. Refer to the specifications table below for more information.

Specifications Table:

INTRODUCTION

Aladdin’s versatile Meal Delivery Carts are available in a variety of capacities to conform to your delivery needs. These carts ensure efficient, quiet transportation for your meal trays. The MDSLP & MDRS models are designed to accommodate two trays per shelf, sideloaded. The MDELP models are designed to accommodate a single tray per shelf end-loaded. Constructed of durable sanitary stainless steel to provide years of trouble-free meal delivery service. The cabinet is constructed with 18 gauge stainless steel with vents on both sides. Doors have sound-dampening insulation. Double-sided pocket doors constructed of 20 gauge stainless steel. A 7/8” diameter stainless steel push handle is mounted to back of cart on single-door models and to end of cart top on double and triple door models.

STANDARD FEATURES:

• Durable and attractive stainless steel cabinet construction
• Field adjustable and removable tray slides to accommodate 15″ x 20″ or 14″ x 18″ trays
• Field replaceable threaded tray guide pins
• Louvered vents to assist heat dissipation
• 2″ wide stainless steel tray slides
• 4-1/2″ tray spacing for MDSLP and MDELP series
• 5-1/2” tray spacing for MDRS series
• Door mullion with recessed door bumpers
• 270º door swing with positive latching in open or closed positions
• Sound-dampening material on inside of doors to reduce noise and vibration
• Full perimeter plastic base/bumper, non-marking
• Plastic top with molded-in top rail as standard feature
• Four (4) 6″ diameter balloon casters with grease fittings, two swivel with brakes and two fixed
• Casters offset 1″ for a “wheel ahead” configuration to permit easy elevator entry or exit (on double & tripple doors models)
• NSF listed

Available options : (Must be specified when ordering.)

• Six wheel 6″ CASTER configuration on two & three door models only.
• Four wheel 8″ CASTER for towing, on carpeted floors and bumpy floor applications. Adds 1″ to overall height.
• Six wheel 8″ CASTER configuration on two & three door models only.
• TOW HITCH package available
• 6″ or 8″ poly caster available.

Model| Tray Capacity| Number of doors| Length| Width| Height
---|---|---|---|---|---
MD10SLP| 10| 1| 38” (96.5 cm)| 28.812” (73.2 cm)| 42.483” (107.9 cm)
MD10SLPRS| 10| 1| 38” (96.5 cm)| 28.812” (73.2 cm)| 48.983” (142.4 cm)
MD16SLP| 16| 1| 38” (96.5 cm)| 28.812” (73.2 cm)| 48.983” (142.4 cm)
MD20SLP| 20| 1| 38” (96.5 cm)| 28.812” (73.2 cm)| 57.983” (147.3 cm)
MD24SLP| 24| 2| 52.700” (133.9 cm)| 38” (96.5 cm)| 40.122” 101.9 cm)
MD28SLP| 28| 2| 52.700” (133.9 cm)| 38” (96.5 cm)| 44.622” (113.3 cm)
MD32SLP| 32| 2| 52.700” (133.9 cm)| 38” (96.5 cm)| 49.122” (124.8 cm)
MD36SLP| 36| 2| 52.700” (133.9 cm)| 38” (96.5 cm)| 53.622” (136.2 cm)
Model| Tray Capacity| Number of doors| Length| Width| Height
---|---|---|---|---|---
MD10ELPRS| 10| 2| 42.454” (107.8 cm)| 28” (71.12 cm)| 44.622” (113.3 cm)
MD14ELP| 14| 2| 42.454” (107.8 cm)| 28” (71.12 cm)| 44.622” (113.3 cm)
MD18ELP| 18| 2| 42.454” (107.8 cm)| 28” (71.12 cm)| 53.622” (136.2 cm)
MD24ELP| 24| 3| 61.374” (155.9 cm)| 28” (71.12 cm)| 49.122” (124.8 cm)
MD27ELP*| 27| 3| 61.374” (155.9 cm)| 28” (71.12 cm)| 53.633” (136.2 cm)

*Followed by configuration characters.

RECEIVING INSPECTIONS

Your Aladdin Meal Delivery Carts are factory tested for performance and are free from defects when shipped. The utmost care has been taken in packaging this product to protect against damage in transit. All interior fittings have been secured to prevent damage. You should carefully inspect your meal delivery cart to assure that no damage has occurred in transit. If however, damage is detected see the following damaged goods policy. Under no condition may a damaged unit be returned to Aladdin Temp-Rite without first obtaining written permission (return authorization). No credit will be issued for claims not reported to Aladdin within ten (10) business days from receipt of shipment.

ALADDIN DAMAGED GOODS POLICY
There are two types of damaged merchandise:

• Visual Damage
• Concealed Damage

Visual Damage – When the product being received is visibly damaged.

1. Receiver should not accept merchandise with visual damage.
2. Receiver must sign delivery receipt “refused merchandise due to damage” and specify damage.
3. Receiver should call Aladdin Customer Service immediately after refusal.
4. Carrier will notify Aladdin Traffic Department and a claim will be filed.
5. Carrier will send acknowledgement of claim within 7 days after receiving.

Concealed Damage – When damaged merchandise cannot be externally detected.
Any receiving operation should be looking for this type of damage. Sometimes, however, depending on the type of product, it is almost impossible to notice.

1. Merchandise must not be removed from point of delivery and all packaging must be kept intact.
2. Receiver must contact Aladdin customer service to report damage.
3. Aladdin traffic department will request inspection based on the dollar value of the cargo.
4. Aladdin traffic department will file a claim based on the findings of the inspection.
   Failure to comply with these policies will result in the customer’s responsibility to file claims.

SAFETY

If you know how to correctly install operate clean and service your Meal Deliver Cart your satisfaction with the equipment will be increased and safety will be enhanced. In accordance with generally accepted product safety labeling guidelines the following three signal words are used throughout this manual to alert you to potential hazards and to tell you how to avoid them.

WARNING: The word “Warning” identifies a potentially hazardous situation which, if not avoided COULD result in death or serious personal injury.

CAUTION: The word “Caution” identifies a potentially hazardous situation which, if not avoided MAY, result in minor or moderate injury. The word “Caution” may also be used to alert against unsafe practices and property damage only accidents.

“Important” is used to identify installation, operation or maintenance information which is important but not hazard related.

INSTALLATION

1. Detach carton from skid, lift carton off skid.
2. Examine cart for damage (See Section II Receiving Inspection).
3. If no damage, remove all packing and strapping material.
4. Remove paper covering cart.
5. Remove unit from skid by tilting the unit and rolling it off the skid.
6. Install tray guides in desired 15” x 20” or 14” x 18” position.

OPERATION
CAUTION Never move cart unless all doors are secured in an open or closed position. Serious damage to hinges and doors may result if bumped into walls or other equipment when doors are open.
Avoid bumping carts into doors, walls or obstructions of any kind.

TOWING

WARNING Injury or equipment damage may result from improper utilization. Always fit safety pin through the hitch.

• The telescopic tow-bar and cart casters are designed only for indoor towing on smooth surfaces.
• Aladdin recommends using great care when towing.
• Maximum speed authorized is 3 miles/hour (5km/hour).
• Curves should be negotiated at a lower speed: 1.5 miles/hour (2.5 km/hour)
• Maximum number of carts to be towed: 2

TRANSPORT OF THE MEAL DELIVERY CARTS IN VANS OR TRUCKS

• The tailgate of the truck should always be level with the loading and off-loading dock. If the tailgate is higher than the dock, the casters will bump against the dock and this can damage both the casters and their attachments.
• Once the carts are loaded inside the truck, they should be lined up and carefully secured to the wall of the truck by means of straps and belt tighteners. Carts should not be allowed to rub together during transport.

CLEANING / MAINTENANCE

CAUTION Harsh chemicals and insufficiently diluted sanitizers will damage stainless steel surfaces. Never use cleaning agents that contain phosphates or chlorides. These chemicals will cause permanent damage to the stainless steel finish and void equipment warranty.

The Aladdin MDSLP, MDELP and MDRS series Carts should be sanitized and cleaned after each use using the following method:

1. Tray slide assemblies are easily removed, without tools, for cleaning; simply lift up to release from bottom pin then push in to release from the top pin. The assemblies can now be pulled out the door opening. The assemblies should be hand-washed.
2. Wipe walls, handles, and sides with a soft clean cloth, using warm water and a mild detergent. Save time by wiping in a figure eight pattern.
3. Use a soft nylon brush on any food buildup and in corners.
4. Sanitize with a properly diluted sanitizer that is recommended for stainless steel according to chemical supplier’s recommendations.
5. Allow water to drain through drain holes which are part of the cabinet floor.
6. Dry thoroughly with a dry cloth to remove moisture.
7. Never use sharp objects, abrasives or scrapers.
8. Aladdin does not recommend steam-cleaning these carts.

MAINTENANCE

• HINGES

1. The cart doors and hinges have been factory aligned with spacers to assure positive latching and smooth action. Be sure to replace these washers if they are removed when cleaning doors and hinges.
2. When doors are removed for cleaning, we recommend that they be put back on the same cart to assure the best possible alignment and operation.

• CASTERS
  • Recommended lubrication is at least once every six months. Lubrication will be required at least every two weeks if carts are cleaned with a hot water or steam cleaning system. Using a standard 16 ounce grease gun, add two pumps of multi-purpose grease to the grease fitting on each caster.

TROUBLESHOOTING
Performance problems often result from minor incidents that can be found and corrected by checking and following the basic points mentioned in the table below.

Caster bearing needs lubrication

| Remove debris

Lubricate caster

Difficulty in opening/closing doors| Hinges require lubrication

Improper alignment of hinges

| Lubricate hinges

Align hinges

Trays do not slide easily into cart.| Tray slide dirty

Tray slides not seated properly

| Remove slides and clean

Correct alignment of tray slides

PARTS LIST

NOTE: Parts for pass-thru or custom carts may vary. Please contact Aladdin Service Department.

BUMPERS

1| 99108| SL VENT SIDE BUMPER
2| 99109| EL VENT SIDE BUMPER
3| 99104| SL DOOR SIDE BUMPER, SINGLE DOOR (10,16,20 MEAL)
3| 99105| SL DOOR SIDE BUMPER DOUBLE DOOR (24, 28, 32,36 meal)
3| 99106| EL DOOR SIDE BUMPER DOUBLE DOOR (14, 18 meal)
3| 99107| EL DOOR SIDE BUMPER THREE DOOR (24,27 MEAL)
4| 99110| CORNER BUMPER
CaSTERS
5| 97259| 6″ BALLOON CASTER, SWIVEL W LOCK
6| 97260| 6″ BALLOON CASTER, RIGID
7| 97261| 8″ BALLOON CASTER ,SWIVEL W LOCK
8| 97262| 8″ BALLOON CASTER, RIGID
9| 11701| 6″ POLY CASTER ,SWIVEL W LOCk
10| 11700| 6″ POLY CASTER, RIGID
11| 99852| 8″ POLY CASTER ,SWIVEL W LOC
12| 99851| 8″ POLY CASTER, RIGID
DOORS
NOTE: Door assembly does not include hinges

Pass thru carts use standard doors

13| 10084| MD10SLP
14| 10050| MD10SLPRS
14a| 10050| MD16SLP
15| 10038| MD20SLP DOOR
16| 10070| MD24SLP LEFT HAND DOOR
17| 10073| MD24SLP RIGHT HAND DOOR
18| 10265| MD28SLP LEFT HAND DOOR
19| 10268| MD28SLP RIGHT HAND DOOR
20| 10278| MD32SLP LEFT HAND DOOR
21| 10281| MD32SLP RIGHT HAND DOOR
22| 10288| MD36SLP LEFT HAND DOOR
23| 10291| MD36SLP RIGHT HAND DOOR
24| 10297| MD10ELPRS /14ELP LEFT hAND DOOR
25| 10300| MD10ELPRS /14ELP RIghT hAND DOOR
26| 10188| MD18ELP LEFT HAND DOOR
27| 10191| MD18ELP RIGHT HAND DOOR
28| 10313| MD24ELP LEFT HAND DOOR
29| 10319| MD24ELP MIDDLE DOOR
30| 10316| MD24ELP RIGHT HAND DOOR
31| 10188| MD27ELP LEFT HAND DOOR
---|---|---
32| 10326| MD27ELP MIDDLE DOOR
33| 10191| MD27ELP RIGHT HAND DOOR
gENERaL
34| 99113| DOOR HANDLE MOLDED
35| 99099| DOOR HINGE RECEIVER BOTTOM
36| 99098| DOOR HINGE WITh PIN
37| 10309| DOOR HINGE MIDDLE DOOR (WELDED)
38| 99111| DOOR, FRAME MAGNET ASSY
39| 99177| DOOR, RETAINER, MAGNET ASSY
40| 97244| DOOR, ShOCK ABSORBER
41| 10330| DRAIN/STOPPER ASSY
42| 10800| HAND HOLDER
43| 99115| HANDLE CAP PLUG
44| 10344| LOCKNUT BRSSS
45| 97554| PIN, UPPER TRAY GUIDE
46| 97555| PIN, LOWER TRAY GUIDE
47| 99118| PUSH HANDLE TUBE ELP CARTS
48| 99117| PUSH HANDLE TUBE SLP DOUBLE-DOOR CARTS
49| 99116| PUSH HANDLE TUBE SLP SINGLE DR
50| 99631| STATIC STRIP
51| 99636| STSTIC STRIP BRSCKET (FOR 8″ CASTERS ONLY)
52| 97278| STRIKE PLSTE
53| 99102| TOP ELP DOUBLE DOOR CSRTS
54| 99103| TOP ELP TRIPLE DOOR CSRTS
55| 99100| TOP SINGLE-DOOR CSRTS
56| 99101| TOP SLP DOUBLE DOOR CSRTS
57| 99112| CSTCH PLSTE (INNER DOOR)
TRay gUIDES Spacing

58| 10087| 10SL| 4.5”
59| 10236| MD10ELPRS| 5.5”
59a| 10345| 14EL| 4.5”
60| 10844| MD10SLPRS| 5.5”
60a| 10053| 16 / 32SL| 4.5”
61| 10194| 18 / 27EL| 4.5”
62| 10042| 20SL| 4.5”
63| 10346| 24El| 4.5”
64| 10076| 24SL| 4.5”
65| 10271| 28SL| 4.5”
66*| 10347| 36SL| 4.5”

• are not shown

WARRANTY & LIABILITY

ALADDIN TEMP-RITE® EQUIPMENT LIMITED WARRANTY Effective January, 2008

Aladdin Temp-Rite® (“ATR”) warrants to the original purchaser that the equipment listed below shall be free from defects in material and workmanship under normal use for the applicable warranty term set forth below. ATR’s obligation under this warranty is limited to the repair or replacement, at the sole option of ATR, of any part which upon inspection and examination by ATR or its authorized agent is found to be defective. A written description detailing the nature of the claimed defect, together with the equipment claimed to be defective if required by ATR, must be delivered to ATR or its authorized agent within 30 days of discovery of the claimed defect (but in no event later than 30 days after the expiration of the applicable warranty term).

*The warranty term commences 30 days after the date of ATR’s invoice for the equipment.

THE WARRANTIES AND REPRESENTATIONS OF ATR CONTAINED HEREIN ARE EXPRESSLY IN LIEU OF, AND THE BUYER WAIVES, ANY AND ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ANY OTHER REMEDIES AGAINST ATR, WHETHER BASED UPON CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE. ATR SHALL NOT BE  LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR ECONOMIC LOSS OF ANY NATURE (INCLUDING LIMITATION LOSS OF REVENUES AND/OR PROFITS) THAT MAY BE CLAIMED TO RESULT FROM ANY NEGLIGENCE OR BREACH OF WARRANTY OR CONTRACT BY ATR.

Exceptions and Exclusions

This warranty is issued only to the original purchaser, and is not transferable and applies only to the products installed within the United States of America, its territories and Canada. During the term of any labor warranty, ATR will pay all pre-approved shipping charges incurred in returning defective equipment to ATR and labor costs incurred in the removal and reinstallation of such equipment. Contact ATR before returning any defective equipment or otherwise performing any warranty repairs. ATR assumes no liability for any work or repair performed without its prior approval. After the expiration of any labor warranty, the original purchaser is responsible for all shipping charges incurred in returning defective equipment to ATR and labor for removing and reinstalling such equipment. ATR shall not be responsible for the replacement of expendable items like lamps and fuses or product failure resulting from normal wear and tear, improper installation, misuse, sabotage, abuse, neglect, accident, unauthorized alterations to repair, or other factors beyond the control of ATR. Neither this warranty, nor the liability of ATR may be modified or extended by action of any agent, distributor or other person or by custom or practice.
CALL ATR TOLL-FREE AT 1-800-888-5426 IF YOU HAVE ANY QUESTIONS ABOUT THIS WARRANTY OR YOUR ATR PRODUCT.

250 East Main Street, Hendersonville, TN 37075
1-800-888-8018

• www.aladdintemprite.com
• info@aladdin-atr.com

P.O. Box 2978, Hendersonville, TN 37077-2978
1-800-888-8018 or 615-537-3600
Fax 1-888-812-9956
www.aladdintemprite.com

References

• Careers | ATR
• Aladdin Temp-Rite® Meal Delivery Systems & Supplies home
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>