andis AGC2 Ultra Edge Super 2 Speed Clipper User Guide

: June 17, 2024
: Andis

Table of Contents

andis AGC2 Ultra Edge Super 2 Speed Clipper
Product Information
Specifications
Product Usage Instructions
IMPORTANT SAFEGUARDS
OPERATING INSTRUCTIONS
Warranty
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

andis AGC2 Ultra Edge Super 2 Speed Clipper

Product Information

Model: ND-2
Manufacturer: Andis Company
Address: 1800 Renaissance Blvd. Sturtevant, WI
53177

Congratulations – you just went First Class when you bought this Andis product. Careful workmanship and quality design have been the hallmarks of Andis products since 1922

Specifications

Power Source: 110-120 volt electrical outlet
Intended Use: Household

Product Usage Instructions

Safety Precautions
When using electrical appliances, especially when children are present, it is important to follow these safety precautions:

Read all instructions before using the product.
Keep the product away from water.
Always unplug the product immediately after use.
Do not use the product while bathing.
Avoid placing or storing the product where it can fall or be pulled into a tub or sink.
Do not place or drop the product into water or other liquids.
If the product falls into the water, unplug it immediately and do not reach into the water.
Never leave the product unattended when plugged in.
Close supervision is necessary when using the product around children.

How Your Andis Dryer with Shock Protection Works

This Andis hair dryer is equipped with an Appliance Leakage Circuit Interrupter (ALCI) that provides shock protection. The ALCI mechanism will shut off the dryer under abnormal conditions, such as falling or being immersed in water. If the dryer becomes inoperable, it should be returned to an Andis Authorized Service Station for examination and repair. The ALCI Shock Protection is equipped with a test and reset button.

Test Before Each Use

Plug the dryer into a 110-120 volt electrical outlet (ordinary household current). Do not use any other electrical outlet.
Before switching the dryer on, perform the following test: Press the test button, and the reset button should pop up. This confirms that the safety plug is working properly.
Press the reset button, and your dryer with the Shock Protection Plug will be operable. The power switch of your dryer may be turned on for normal use.
If the appliance does not operate in the proper functioning condition, it should be either returned to an Andis Authorized Service Station for examination and repair or discarded.

Instructions d’Utilisation du Produit (French)

(Translated from English to French)
[Insert translated usage instructions here]

IMPORTANT SAFEGUARDS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING.
KEEP AWAY FROM WATER.

DANGER: As with most electrical appliances, electrical parts are electrically live even when the switch is off. To reduce the risk of death by electric shock:

Always “unplug it” immediately after using it.
Do not use it while bathing.
Do not place or store appliances where they can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
If an appliance falls into water, “unplug it” immediately.
Do not reach into the water

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:

An appliance should never be left unattended when plugged in.
Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Andis.
Never operate this appliance if it has a damaged cord or plugs if it is not working properly, if it has been damaged, or dropped into water. Return the appliance to an Andis Authorized Service Station for examination and repair.
Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
Never block the air openings of the appliance or place it on a soft surface such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, etc.
Never use it while sleeping.
Never drop or insert any object into any openings.
Do not use outdoors, or operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord with this appliance.
Do not direct hot air toward eyes or other heat-sensitive areas.
Attachments may be hot during use. Allow them to cool before handling.
Do not place the appliance on any surface while it is operating.
While using the appliance– keep your hair away from the air inlets.
Do not operate with a voltage converter.

SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE

OPERATING INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, the plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still doesn’t fit, contact a qualified electrician. Do not attempt to defeat this safety feature. If this unit shuts itself off, first press the reset button on the ALCI. If it still does not run, the thermal protectors that are built into this dryer may have operated. If the unit still does not run after being allowed to cool, return the unit for servicing.

HOW YOUR ANDIS DRYER WITH SHOCK PROTECTION WORKS
This Andis hair dryer has been manufactured with an APPLIANCE LEAKAGE CIRCUIT INTERRUPTER (ALCI). This mechanism will shut the dryer off (making it inoperable) under abnormal conditions, such as falling or being immersed in water. If this appliance becomes inoperable, return it to an Andis Authorized Service Station for examination and repair. The ALCI Shock Protection is equipped with a test and a reset button. Below are instructions on their use.

TEST BEFORE EACH USE

Plug the dryer into a 110-120 volt electrical outlet (ordinary household current). Do not attempt to use any other electrical outlet.
Before attempting to switch the dryer on, perform the following test: Press the test button, and the reset button should pop up. This confirms that the safety plug is working properly.
Now press the reset button and your dryer with the Shock Protection Plug will be operable and the power switch of your dryer may be turned on for normal use.
If this appliance does not operate in the proper functioning condition, it should be either returned to an Andis Authorized Service Station for examination and repair or discarded.

Heat Selections

There are 2 settings: HI air speed/heat and LO air speed/heat. Fingertip control allows you to quickly choose either setting. cool shot
This dryer is equipped with a cool shot button. To achieve a cool shot of air, just press the button located on the front top portion of the handle. The cool shot is ideal for locking in curl for a longer longer-lasting style. Just concentrate cool air on the desired curl until set.

USER-MAINTENANCE INSTRUCTIONS
This appliance does not require special maintenance, cleaning or lubrication. Service only through Andis Authorized Service Stations. Untwist the cord before use. After use, re-wrap the cord and store the unit in a safe place. Do not wrap the cord tightly around the appliance. Do not hang the unit by the power cord.

Cleaning

The hair dryer must be unplugged before it is cleaned.
Clean the external surfaces of the hair dryer with a sponge or soft rag moistened with a mild soap and water solution. Do not use harsh cleaners, detergents, or solvents.
Dry the hair dryer thoroughly before use.
Clean the screen with a vacuum cleaner.

How to Blow Dry

Towel-pat wet hair to remove excess water and shorten drying time; untangle hair. Part hair into sections; blow dry hair section by section.
Choose the most comfortable setting that gives the best results.
Heat molds and puffs up hair to give it body and fullness. The way you lift and dry damp hair at the scalp, and turn the ends, will determine the direction of the hair

Warranty

Manufacturer’s 60 Month Limited Warranty
Andis warrants this product to the original purchaser against defective material or workmanship for five years from the purchase date. All implied warranties are also limited to five years. If this Andis product fails to operate properly under normal household use conditions within the warranty period because of a defect in workmanship or material, Andis will replace the unit without cost to the consumer for parts and labor. The defective product must be returned via parcel post insured or U.P.S., with proof of purchase to any Andis Authorized Service Station or to Andis, 1800 Renaissance Blvd., Sturtevant, WI 53177 USA. In Canada, please call 1-800-335-4093 for repair information. Attach a letter describing the nature of the problem. Andis will not be responsible for the cost of repairs or alterations made by any other person, agency, or company, nor for incidental or consequential damages of any type, or the use of unauthorized attachments. Some states may not allow the exclusion of limitation of incidental or consequential damages, so the limitation or exclusion may not apply to you.

Date Purchased _____
Model _____

To find an Andis Authorized Service Station near you log on to www.andis.com or contact our customer service department: 1-800-558-9441 (U.S.) or 1-800-335-4093 (Canada)

FAQ

Q: Where can I find an Andis Authorized Service Station?
- A: You can find an Andis Authorized Service Station near you by visiting our website at www.andis.com or contacting our customer service department.
Q: What should I do if the dryer does not operate properly?
- A: If the dryer does not operate in the proper functioning condition, it should be either returned to an Andis Authorized Service Station for examination and repair or discarded.

Contact Information