AMCREST AMPS9E8P-AT-96 8 Port PoE Switch Over Ethernet User Manual

: June 17, 2024
: Amcrest

Table of Contents

AMCREST AMPS9E8P-AT-96 8 Port PoE Switch Over Ethernet
Important Safeguards & Warnings
Product Overview
Device Structure
Appendix 1 Technical Speciﬁcation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AMCREST AMPS9E8P-AT-96 8 Port PoE Switch Over Ethernet

AMCREST-AMPS9E8P-AT-96-8-Port-PoE-Switch-Over-Ethernet-PRODUCT-
IMAGE

Specifications

Model : AMPS9E8P-AT-96
Product Type : 8-Port PoE Switch
User’s Manual Version : 1.0.0
Manufacturer : Amcrest Technologies LLC

Product Overview
The AMPS9E8P-AT-96 is a simple, reliable, and secure 8-Port PoE switch. It is designed for commercial use and supports various protocols and standards.

Features

Two-layer commercial PoE switch
Supports IEEE802.3i 10 BASE-T, IEEE802.3u 100 BASE-TX, IEEE802.3x Flow Control, IEEE802.3af Power over Ethernet, IEEE802.3at Power over Ethernet, IEEE802.3az EEE Protocols
MAC auto study and aging with a capacity of 4K MAC addresses
All ports self-adapt MDI/MDIX mode
All 10/100M auto-negotiation RJ45 PoE ports support IEEE802.3af and IEEE802.3at standards
Commercial wide temperature design
Supports AC100-240V 50/60Hz Power Supply

Typical Application

The typical application of the AMPS9E8P-AT-96 is shown in the diagram below:

Device Structure

8-Port PoE Switch
The device has 10 ports in total, including 8 10/100M self-adaptive PoE RJ45 ports and 2 100M self-adaptive RJ45 UpLink ports. It also features a PoE Consumption Status LED Screen for monitoring the power consumption of each PoE port. The device supports manual switching between Switch, VLAN, and Extend modes.
PoE Power Output
The 10/100 RJ45 PoE ports of the AMPS9E8P-AT-96 switch support IEEE802.af and IEEE802.3at power standards. The switch can provide simultaneous power to each port using IEEE802.3at and IEEE802.3af. The total power draw of the unit should not exceed 96W.

Technical Specification

Download Ports : 8 x 10/100M PoE RJ45 ports
Uplink Ports : 2 x 100M self-adaptive RJ45 ports
PoE Standard : IEEE802.3af, IEEE802.3at
Total Power Supply : AC100-240V 50/60Hz
LED Indicator : Power, PoE Status, Uplink Status
Transmission Mode : Store-and-Forward
Backplane Bandwidth : 1.6Gbps
Packet Forwarding Rate : 1.19Mpps
MAC Address Capacity : 4K
Power Supply Size : 96W
Working Temperature: -10°C to 45°C
Storage Temperature: -40°C to 70°C

FAQ

Q: Can I use a different power supply for the AMPS9E8P-AT-96 switch?
A: No, it is recommended to only use the provided manufacturer power supply to avoid unit failure and/or damage.
Q: Where can I find the latest version of the user manual?
A: The latest version of the user manual can be downloaded from the official Amcrest Technologies LLC website at https://manual-hub.com/.

8-Port PoE Switch

User’s Manual
- Version 1.0.0

Important Safeguards & Warnings

Attention :
Please read the following safeguards and warnings carefully before using the product in order to avoid damages and losses.

Note:

Do not expose the device to Soot, high humidity or dust. Doing so may cause ﬁre or electric shock.
Do not install the device in direct sunlight as it may cause overheating and failure.
Installation of the unit should be via the compatible rack mount or securely on a ﬂat surface.
Do not place the device on carpet or other insulating surfaces. Ex. Rugs, towels, rags, clothing, etc.
Do not block or impede airﬂow to or around the unit. Doing so may cause overheating, failure or ﬁre.
Do not place stack or place objects on the unit.
This unit contains no user serviceable parts. Servicing should only be performed by approved technicians.

Warning:

Do not use a power supply other than the provided manufacturer power supply. Failure to do so may cause unit failure and/or damage. Special Announcement:
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of Amcrest Technologies LLC.

Applicable Models:
The manual can be applied to the following model: AMPS9E8P-AT-96

Product Overview

Features

Common Features:

Two-layer commercial PoE switch.
Supports IEEE802.3i 10 BASE-T, IEEE802.3u 100 BASE-TX, IEEE802.3x Flow Control, IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet, IEEE802.3az EEE Protocols
MAC auto study and aging, MAC address list capacity is 4K.
All ports self-adapt MDI/MDIX mode.
All 10/100M auto-negotiation RJ45 PoE ports support IEEE802.3af and IEEE802.3at standards.
Commercial wide temperature design.
Supports AC100-240V 5/60Hz Power Supply

Individual Features:

8-port PoE switch supports 2 100M self-adaptive RJ45 UpLink ports and 8 10/100M self-adaptive PoE RJ45 ports. 8-port PoE switch with max 96W total power consumption.
1 PoE Power Consumption Status Display.

Typical Application
The typical application of the device is shown in Figure 1- 1

AMCREST-AMPS9E8P-AT-96-8-Port-PoE-Switch-Over-Ethernet-
IMAGE-1

Device Structure

2.1 8-Port PoE Switch

AMCREST-AMPS9E8P-AT-96-8-Port-PoE-Switch-Over-Ethernet-
IMAGE-2

SN
1| Name
PoE Consumption Status| LED| Screen| Note
Monitor the total power consumption of each PoE port.
---|---|---|---|---
2| 1, 2, 3, 4, 5, 6, 7, 8| 8 10/100M auto-negotiation RJ45 ports.
3| 9, 10 (Uplink)| 2 100M self-adaptive RJ45 ports.
4| Switch, VLAN, Extend| Manually change between Switch, VLAN, and extended modes.

Note: When VLAN is enabled, communication is isolated between downlinks and uplink. Downlinks do not communicate with each other.

PoE Power Output
10/100 RJ45 PoE Ports support IEEE802.af and IEEE802.3at power standards. Supports simultaneous power to each port using IEEE802.3at and using IEEE802.3af. Total power draw of the unit cannot exceed 96W.