AMCREST AMPS9E8P-AT-96 9-Port POE+ Power Over Ethernet POE Switch User Manual
- June 5, 2024
- Amcrest
Table of Contents
AMCREST AMPS9E8P-AT-96 9-Port POE+ Power Over Ethernet POE Switch
Product Overview
Features
Common Features:
Two-layer commercial PoE switch.
Supports IEEE802.3i 10 BASE-T, IEEE802.3u 100 BASE-TX, IEEE802.3x Flow
Control, IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet,
IEEE802.3az EEE Protocols
MAC auto study and aging, MAC address list capacity is 4K.
All ports self-adapt MDI/MDIX mode.
All 10/100M auto-negotiation RJ45 PoE ports support IEEE802.3af and
IEEE802.3at standards.
Commercial wide temperature design.
Supports AC100-240V 5/60Hz Power Supply
Individual Features:
8-port PoE switch supports 2 100M self-adaptive RJ45 UpLink ports and 8
10/100M self-adaptive PoE RJ45 ports. 8-port PoE switch with max 96W total
power consumption.
1 PoE Power Consumption Status Display.
Typical Application
The typical application of the device is shown in Figure 1- 1
Device Structure
Port PoE Switch
SN
1
| Name
PoE Consumption Status
| ****
LED
| ****
Screen
| Note
Monitor the total power consumption of each PoE port.
---|---|---|---|---
2| 1, 2, 3, 4, 5, 6, 7, 8| 8 10/100M auto-negotiation RJ45 ports.
3| 9, 10 (Uplink)| 2 100M self-adaptive RJ45 ports.
4| Switch, VLAN, Extend| Manually change between Switch, VLAN, and extended
modes.
PoE Power Output
10/100 RJ45 PoE Ports support IEEE802.af and IEEE802.3at power standards. Supports simultaneous power to each port using IEEE802.3at and using IEEE802.3af. Total power draw of the unit cannot exceed 96W.
Appendix 1
Technical Specification
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>