AMCREST AMC-NC-1080TC28-W Night Color Turret Analog Camera User Guide

AMCREST AMC-NC-1080TC28-W Night Color Turret Analog Camera

Specifications

• Model: AMC-NC-1080TC28-W
• Image Sensor: 2MP CMOS
• Resolution: 1080p (2592×1944) @30fps
• Features: 2D NR, Full-Color, DC12V, 2.0A

Product Usage Instructions

Installation

1. Remove the base portion of the camera using the included star tool.
2. Mark the installation holes on the mounting surface using the base of the camera.
3. Drill holes and insert wall anchors.
4. Attach power and BNC cabling to the camera.
5. Connect the cables to the BNC connection and power supply.
6. Secure the camera base to the mounting surface using screws.
7. Attach the cover over the camera and secure it to the mounting plate.

Connection
To connect your camera to your DVR, follow the steps provided below:

1. [Step 1]
2. [Step 2]
3. [Step 3]

FAQ

• What should I do if I cannot view my cameras on my device?
  Check if the mode switch configuration for your camera is set correctly. If not, adjust it according to the configuration diagram provided with the camera.

• How do I troubleshoot issues with my camera?
  If you encounter issues with your camera, refer to the troubleshooting section in the user manual. You can also contact Amcrest Support for assistance.

Welcome

• Thank you for purchasing an Amcrest camera!
• This user manual is designed to be a reference tool for the installation and operation of your camera. Here you can find information about the camera’s features and functions, as well as information to aid in troubleshooting.
• For access to other support related materials and information, please visit us at http://amcrest.com/support
• Call Amcrest Support using one of the following numbers:
  • Toll free: (888)212-7538
  • International Callers (Outside of the US): +1-713-893-9656
  • USA: 713-893-8956
  • Canada: 437-888-0177
  • UK: 203-769-2757
  • Email Amcrest Customer Support: https://amcrest.com/contact

Important Safeguards and Warnings

1. Electrical Safety
   All installation and operation should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electrical shock. We assume no liability or responsibility for any fires or electrical shock caused by improper handling or installation.

2. Transportation Security
   Heavy stress, violent vibrations, and excess moisture should not occur during transportation, storage, and installation of the device.

3. Installation
   Handle the device with care. Do not apply power to the camera before completing installation. Do not place objects on top of the camera.

4. Repair Professionals
   All the examination and repair work should be performed by a qualified service engineer. We are not liable for any problems caused by unauthorized modifications or user attempted repair.

5. Environment
   The camera should be kept in a cool, dry place away from direct sunlight, flammable materials, explosive substances, etc. This product should be transported, stored, and used only in the specified environments as stated above. Do not aim the camera at a strong light source as it may cause overexposure of the picture or affect the longevity of the camera’s sensors. Ensure the camera is in a well-ventilated area to prevent overheating.

6. Operation and Maintenance
   Do not touch the camera sensor or lens directly. To clean dust or dirt off the lens, use an air blower or a microfiber cloth.

7. Accessories
   Be sure to use only the accessories recommended by the manufacturer. Before installation, please open the package and check to make sure that all the components are present. Contact the retailer that you purchased from or Amcrest directly if anything is broken or missing in the package.

Product Introduction

• This series of cameras is adapted with CMOS image sensors that provide high performance, high megapixel resolution that supports 1080p video. It supports monitoring signals and audio via a coaxial transmission and standard BNC connection and built-in microphone. Transmission distances can range from more than 2624ft @ 1080p. This is a quadbrid camera that supports CVI/TVI/AHD/Analog output as well as recognize high speed, long distance, and real time video transmissions. For more information about quadbrid cameras please refer to the information provided below.
• Quadbrid technology allows you to transmit HD video over coaxial. The signal is transmitted uncompressed, which eliminates latency and allows for real-time, highly reliable video security without loss or delay. The cameras connect point-to-point directly to the DVR (BNC) which provides a highly secure, closed network, as well as a painless and non-complex plug-and-play setup process.
• Each quadbrid camera is compatible with HD-CVI, HD-TVI, AHD, and Analog systems. The settings for these cameras can be adjusted on the mode switch which is connected to the camera as displayed in the image below:

• Each mode switch setting can be configured per device. For instance, an Amcrest HD-CVI unit will have the following configuration on the mode switch:

Note: If the mode switch configuration for your camera is not properly set, you will not be able to view your cameras on your device since the mode configuration is incorrect.

• Each camera is equipped with a configuration diagram that displays the different settings per device. Please ensure these settings are correct, per the specified diagram for full functionality of your camera before continuing the setup process.

Features

• 2MP CMOS
• 1080p (2592×1944)@30fps
• 2D NR, Full-Color
• DC12V, 2.0A

Installation

Before physically installing your camera, make sure the mounting surface can support up to 3x the weight of the camera.

1. Remove the base portion of the camera using the included star tool.

2. Locate the position in which you would like to place your camera and using the base of the camera, mark the installation holes with a marker on the mounting surface. These holes will be used to drill the holes needed to mount your camera.

3. Using a drill bit that is the same diameter or slightly smaller diameter than the included drywall wall anchors, drill the 4 holes and insert the wall anchors into the holes.
   Note: The wall anchors should be in the same bag as the screws and are designed to secure the screws onto the mounting surface.

4. Attach the power cable and BNC cabling to the camera. (If you are running the cables through a mounting surface, use a 1” paddle bit to bore a hole for the cables.)

5. Attach the cables to the BNC connection and power supply and place the base of the camera on the wall anchors lining the holes to the mounting surface. Please note, if you are running the cables through the mounting surface, run the cables into the hole, if you are running the cables on the side of the camera, ensure the cables are ran the groove found on the side of the mounting plate.

6. Using a Phillips head screwdriver, secure the screws and base of the camera to the mounting surface.

7. Place the cover over the camera and make it flush to the mounting plate and secure it to the mounting plate using the included star tool.

Connection

To connect your camera to your DVR, please follow the steps provided below:

• Step 1: Connect a BNC (coaxial) cable to the video out connection of your camera.
• Step 2: Connect the male end of the DC power connector of the BNC (coaxial) cable to the female end of the power connector of the camera.
• Step 3: Connect the BNC (coaxial) cable to a video out channel on the back of your DVR.
• Step 4: Connect the male end of the DC power connector of the power adapter to the female end of the power connector of the BNC (coaxial) cable. Plug in the power adapter to apply power to the camera.
  For more information on the installation process described, refer to the image below for more details.

Technical Specifications

(illuminator on)
S/N Ratio| >65 dB
Illumination Distance| 131.23ft (40m)
Illuminator On/Off Control| Auto/Manual
Illuminator Number| 2 (Warm light LEDs)
Pan/Tilt/Rotation Range| Pan: 0°-360°, Tilt: 0°-78°, Rotation: 0°-360°
Lens|
Lens Type| Fixed-focal
Lens Mount| M12
Focal Length| 2.8mm
Max. Aperture| F.16
Field of View| H:108°, V: 58°, D: 127°
Iris Control| Fixed
Close Focus Distance| 2.30ft (0.7m)

DORI Distance

|  | Lens| Detect| Observe| Recognize| Identify|
2.8mm| 138.45ft| 55.45ft| 27.56ft| 13.78ft|
*Note: The DORI distance is a “general proximity” of distance which makes it easy to pinpoint the right camera for your needs. The DORI distance is calculated based on sensor specification and lab test result according to EN 62676-4 which defines the criteria for Detect, Observe, Recognize, and Identify

respectively.

Video|
 | CVI: PAL: 1080p@25fps; NTSC: 1080p@30fps
Video Frame Rate| AHD: PAL: 1080p@25fps; NTSC: 1080p@30fps TVI: PAL: 1080p@25fps; NTSC: 1080p@30fps

CVBS: PAL: 960H; NTSC: 960H

---|---
Resolution| 1080P (1920 x 1080); 960H (960 x 576/960 x 480)
Day/Night| Color
BLC| BLC; HLC; DWDR
WDR| DWDR
White Balance| Auto, Area white balance
Gain Control| Auto
Noise Reduction| 3D NR
Illumination Mode| Smart Light
Mirror| Supported
Port|

Video Output

| Video output choices of CVI/TVI/AHD/CVB by one BNC port
Audio Input| One channel built-in mic
General|
Power Supply| 12 VDC ± 30%
Power Consumption| Max 5.2W (12V DC, LED on)
Operating Temperature| -40°F to 140°F (-40°C to +60°C)
Operating Humidity| <95% (RH), non-condensing
Storage Temperature| -40°F to 140°F (-40°C to +60°C)
Ingress Protection| IP67

Mounting Brackets

| Junction Box: AMCPFA130-E, Wall Mount: AMCFB204W, Pole

Mount: AMCPFA152-E

Casing| Metal
Dimensions| Φ4.17” x 3.69” (Φ106.0mm x 93.6mm)
Net Weight| 0.99lbs.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes, or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form.
3. For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.
4. RF exposure warning: This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

IC Warning Statement

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

Appendix A: Toxic or Hazardous Materials or Elements

Component Name

| Toxic or Hazardous Materials or Elements|  |  |
---|---|---|---|---
Pb| Hg| Cd| Cr VI| PBB| PBDE
Sheet Metal (Case)| ○| ○| ○| ○| ○| ○
Plastic Parts (Panel）| ○| ○| ○| ○| ○| ○
Circuit Board| ○| ○| ○| ○| ○| ○
Fastener| ○| ○| ○| ○| ○| ○
Wire and Cable/Ac Adapter| ○| ○| ○| ○| ○| ○
Packing Material| ○| ○| ○| ○| ○| ○
Accessories| ○| ○| ○| ○| ○| ○

• O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006 standard.
• X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the environmental-friendly use period (EFUP) period, the toxic or hazardous substance or elements contained in products will not leak or mutate so that the use of these (substances or elements) will not result in any severe environmental pollution, any bodily injury or damage to any assets. The consumer is not authorized to process such kind of substances or elements, please return to the corresponding local authorities to process according to your local government statutes.

Note:

• This document is for reference only. Slight differences may be found in the user interface.
• All the designs and software here are subject to change without prior written notice.
• All trademarks and registered trademarks mentioned are the properties of their respective owners.

ABOUT COMPANY

To contact Amcrest support, please do one of the following:

• Visit https://amcrest.com/contact and use the email form.
• Call Amcrest Support using one of the following numbers: Toll Free US: 888-212-7538
• International Callers (Outside of US): +1-713-893-8956
• USA: 713-893-8956
• Canada: 437-888-0177
• UK : 203-769-2757
• Email Amcrest Customer Support https://amcrest.com/contact

References

• Contact Us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>