andis CSI-1E-D Iron Coiffant User Manual
- June 17, 2024
- Andis
Table of Contents
use and care
MODELS
| CSI-1E-D | CSI-2EA-D | CSV-1EA-D |
|---|---|---|
| CSI-1EA-D | CSI-3E-D | CSV-2EA-D |
| CSI-2E-D | CSI-3EA-D | CSV-3EA-D |
Item pictured may differ from actual product
Congratulations—you just went First Class when you bought this Andis
appliance. Careful workmanship and quality design have been hallmarks of Andis
products since 1922.
IMPORTANT SAFEGUARDS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
Read all instructions before using.
KEEP AWAY FROM WATER.
DANGER: As with most electrical appliances, electrical parts are
electrically live even when the switch is off. To reduce the risk of death by
electric shock:
- Always “unplug it” immediately after using.
- Do not use while bathing.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- If an appliance falls into water, “unplug it” immediately.
Do not reach into the water.
WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:
- An appliance should never be left unattended when plugged in.
- Close supervision is necessary when this appliance is used by, on or near children or individuals with certain disabilities.
- Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Andis Company.
- Never operate this appliance if it has a damaged cord or plug. If it is not working properly, or if it has been dropped, damaged, or dropped into water return the appliance to an Andis Authorized Service Station for examination and repair.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never use while sleeping.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with this appliance.
- This iron is hot when in use. Do not let eyes and bare skin touch heated surfaces.
- Do not place the heated flat iron directly on any surface while it is hot or plugged in.
- Before plugging in, read the information about dual voltage contained in the instruction section of this manual.
SAVE THESE INSTRUCTIONS
This appliance is intended for household use
TOPERATING INSTRUCTIONS
This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, the plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature. As an added safety feature, this iron will automatically shut
off after 1 hour (some models only).
Confirm the voltage available at each overseas location before using the
appliance. For connection to a 240-volt supply, use an attachment plug adapter
of the proper configuration for the power supply receptacle.
USER-MAINTENANCE TINSTRUCTIONS
This appliance does not require special maintenance, cleaning or lubrication.
If metal plates do not get hot, return for servicing. Service only through
Andis Authorized Service Stations. Untwist cord before use. After use, allow
unit to cool, re-wrap cord and store in a safe place. Do not wrap cord around
appliance. Do not hang the unit by the power cord.
CAUTION: Care should be used when using this appliance on damaged or
color treated hair.
Temperature settings
STYLING TEMPERATURE – depends on hair texture and condition.
Generally . . .for:
Fine, bleached or hair in poor condition
LOWER SETTINGS
Normal hair
HIGHER SETTINGS
Once your iron reaches the temperature you select, it maintains it all through
styling.
TO USE YOUR ANDIS FLAT IRON
-
To pre-heat your Andis Flat Iron, plug into an electrical outlet. (Please refer to the Operating Instructions of this manual for more detail).
Turn switch to the “ON” position and select operating temperature.
Indicator Lights
The red light is the power indicator. When the unit is in use, the red light will stay on. The green light is the temperature light. When the unit is first turned on, the green light will be on. As it starts heating up, the green light will begin to blink. When it reaches the selected temperature, the green light will go out. -
Always make certain that your hair is completely dry before styling with your iron. Comb through hair to smooth out any snarls. Hold ends taut with one hand. Part off a section of hair to be straightened, starting at the back nape area towards the crown, moving along the sides and finishing at the front top area.
-
Open clamp and grip hair within one inch of scalp.
-
Pull the iron away from the scalp, letting the hair glide through the plates.
-
Repeat as necessary. Do not repeat on the same section of hair for an extended period of time.
-
Allow hair to cool off. Do not comb or brush since this will undo the hairstyle.
PLATE LOCKING FEATURE AND STORING
Note: Not all models have plate locks
- When finished, turn switch to the “OFF” position. Allow iron to cool before storing.
- Engage the plate locking feature for easy storage. Hold plates together and rotate the lock clockwise. To unlock plates, rotate the lock counter clockwise.
- Re-wrap cord and store in a safe place. Do not wrap cord around appliance. Do not hang the unit by the power cord.
Manufacturer’s 60 Month Limited Warranty
Andis warrants this product to the original purchaser against defective
material or workmanship for five years from purchase date. All implied
warranties are also limited to five years. If this Andis product fails to
operate properly under normal household use
conditions within the warranty period because of defect in workmanship or
material, Andis will replace or repair the unit without cost to consumer for
parts and labor. The defective product must be returned via parcel post
insured or U.P.S., with proof of purchase to any Andis Authorized Service
Station or to Andis, 1800 Renaissance Blvd., Sturtevant, WI 53177 USA. In
Canada, please call 1-800-335-4093 for
repair information. Attach a letter describing the nature of the problem.
Andis will not be responsible for cost of repairs or alterations made by any
other person, agency or company, nor for incidental or consequential damages
of any type, or for the use of unauthorized attachments. Some states may not
allow exclusion of limitation of
incidental or consequential damages, so the limitation or exclusion may not
apply to you.
Date Purchased Model____
To find an Andis Authorized Service Station near you log on to
www.andis.com or contact our customer service
department: 1-800-558-9441 (U.S.) or
1-800-335-4093 (Canada)
KEEP THIS FOR YOUR RECORDS
Guarde este documento en sus archivos
CONSERVEZ CE DOCUMENT DANS VOS DOSSIERS
Andis Company
1800 Renaissance Blvd. Sturtevant, WI 53177
1-800-558-9441 Canada:
1-800-335-4093
[email protected]
www.andis.com
Form #67263 Rev. F
© 2010 Andis Company, USA
Printed in China