AT T CL82115 Cordless Phone Expansion Handset User Guide

: June 17, 2024
: AT&T

Table of Contents

AT T CL82115 Cordless Phone Expansion Handset
Product Information
Product Usage Instructions
Telephone base installation
Charger installation
Battery installation
Initial settings
Telephone operation
Caller ID
Missed call indicator
Answering system
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AT T CL82115 Cordless Phone Expansion Handset

AT-T-CL82115-Cordless-Phone-Expansion-Handset-PRODUCT

Product Information

Specifications

Model: CL82115/CL82215/CL82315/CL82415/CL82465/CL82515
Power Adapter: Provided with the product
Battery: Model BT183342/BT283342 (rechargeable)
Charging Time: 10 hours

Telephone Base Installation

Plug one end of the telephone line cord into a telephone jack or a DSL filter (required for DSL high-speed Internet service, not included).
Route the telephone line cord through the designated slot on the telephone base.
Plug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch.
Route the power adapter cord through the designated slot on the telephone base.
Raise the antenna on the telephone base.
Plug the small end of the telephone base power adapter into the power adapter jack on the back of the telephone base.
Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base.

Charger Installation

Plug the power adapter into a power outlet not controlled by a wall switch.
Caution: Use only the provided power adapter(s) for this product. To obtain a replacement, visit www.telephones.att.com or call 1 800-222-3111 (1 866-288-4268 in Canada).

Battery Installation

Step 1: Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label “THIS SIDE UP” facing up.
Step 2: Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.
Step 3: Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the handset will be on during charging.

Note: It is recommended to charge the battery for ten hours continuously before initial use.

Product Usage Instructions

Quick Reference Guide – Handset

CHARGE light: Indicates charging status when the handset is in the telephone base or charger.
REDIAL/PAUSE: Press to make or answer a call.
PHONE/FLASH: Press and hold to set or dial your voicemail number.
TONE/SPEAKER: Press to make or answer a call using the speakerphone.
DIR/VOLUME: Press to navigate menus or adjust volume.
MENU/SELECT: Press to access menu options or select an option.
OFF/CANCEL: Press to end a call or cancel an action.
QUIET# (pound key): Press and hold to enter the QUIET mode setting screen or deactivate QUIET mode.
EQ: During a call or playback, press to change the audio quality.
MUTE/DELETE: Press to mute the microphone during a call or delete items.
PUSH TO TALK: Use the intercom feature by pressing this button.

Quick Reference Guide – Telephone Base

IN USE indicator: Shows if the telephone line is in use or not.
Message counter: Displays the number of messages or other answering system information.
X/DELETE: Press to skip a message or delete items.
/REPEAT: Press to repeat the previous message.
/ANS ON/OFF: Press to turn the built-in answering system on or off.
/PLAY/STOP: Press to start or stop message playback.
FIND HS: Press to page all handsets when the phone is idle.

Initial Settings

We recommend programming your telephone system before use.

Some common features to set before using the telephone include:

Handset settings
Answering system settings

For detailed instructions on setting all telephone features, refer to the Handset settings and Answering system settings in the Abridged user’s manual or the online Complete user’s manual.

FAQ

Q: Where can I obtain a replacement power adapter?

A: You can visit our website at www.telephones.att.com or call 1 800-222-3111 (1 866-288-4268 in Canada) to obtain a replacement power adapter.

Q: How long should I charge the battery before initial use?

A: It is recommended to charge the battery for ten hours continuously before initial use.
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your Abridged user’s manual provided in the package, or see the online Complete user’s manual at www.telephones.att.com/manuals.

Telephone base installation

AT-T-CL82115-Cordless-Phone-Expansion-Handset-FIG-1

Charger installation

Plug the power adapter into a power outlet not controlled by a wall switch.
Caution: Use only the power adapter(s) provided with this product.
To obtain a replacement, visit our website at www.telephones.att.com or call 1 800-222-3111. In Canada, dial 1 866-288-4268.

Battery installation

Install the battery, as shown below. Charge your handset(s) before initial use. The battery is fully charged after ten hours of continuous charging.

Step 1

Plug the battery connector securely into the socket inside the handset battery compartment. Insert the supplied battery with the label THIS SIDE UP facing up, as indicated.

Step 2

Align the cover ﬂat against the battery compartment, then slide it upwards until it clicks into place.

CHARGE light

Step 3

Charge the handset by placing it face forward in the telephone base or charger.
The CHARGE light on the handset is on during charging.

Quick reference guide – handset

Handset side view

Quick reference guide – telephone base

Initial settings

We recommend you program your telephone system before use.
The following are a few examples of common features to set before using the telephone.
Refer to the Handset settings and Answering system settings in the Abridged user’s manual or the online Complete user’s manual for detailed instructions on setting all telephone features.

Reset language to English

If you have accidentally changed the screen display language and want to switch it back to English, follow the steps mentioned below.
MENU in idle mode -> enter 364#.

Telephone operation

AT-T-CL82115-Cordless-Phone-Expansion-Handset-FIG-11

Caller ID

This product supports caller ID services offered by most telephone service providers.
The telephone stores caller ID information of the last 50 incoming calls in the telephone base.
This information is common to all devices.

Missed call indicator

When a handset is in idle mode and has new or missed calls, its screen shows XX Missed calls.
You can erase the missed call indicator either by reviewing the call log one by one or by pressing and holding CANCEL in idle mode.

Call block

If you have subscribed to the caller ID service, you can use the call block feature to reject certain calls automatically. The call block list can store up to 20 entries. This feature is only available on the cordless handset.

Directory

The directory can store up to 50 entries, which are shared by all system handsets.

Answering system

About the answering system and voicemail

Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering system and those left at your telephone service provider’s voicemail.
To listen to messages recorded on the built-in answering system, refer to the Message playback section; to listen to voicemail, contact your telephone service provider for more information.
For more detailed instructions, please refer to the Abridged user’s manual provided in your package, or for a full set of installation and operation instructions, refer to the online CL82115/CL82215/CL82315/CL82415/CL82465/CL82515 DECT 6.0 cordless telephone/answering system with caller ID/call waiting Complete user’s manual at www.telephones.att.com/manuals.
For customer service or product information, visit our website at www.telephones.att.com or call 1 800-222-3111. In Canada, dial 1 866-288-4268.
2015-2017 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 2.0 AT&T 03/17.
Use only the supplied rechargeable battery or replacement battery (model BT183342/BT283342).