TESLA HI6401SB Induction Hob User Manual

TESLA HI6401SB Induction Hob

Product Information

Specifications

• Model: HI6401SB
• Product Type: Induction Hob
• Languages: English (ENG), Bosnian/Croatian (BiH/CG), Croatian (HR), Slovenian/Serbian (SLO SRB)
• Product images are for illustrative purposes only and may differ from the actual product.

Important Warnings

1. Installation and repair should always be performed by AUTHORIZED SERVICE. Manufacturer shall not be held responsible for operations performed by unauthorized persons.
2. Please read the operating instructions carefully. Only by doing so, you can use the appliance safely and in a correct manner.
3. The cooker should be used according to the operating instructions.
4. Keep children below the age of 8 and pets away when operating.
5. WARNING: Fire hazard; do not store materials on the cooking surface.
6. WARNING: The appliance and its accessible parts are hot during operation.
7. Setting conditions of this device are specified on the label (or on the data plate).
8. The accessible parts may be hot when the grill is used. Small children should be kept away.
9. WARNING: This appliance is intended for cooking. It should not be used for other purposes like heating a room. To clean the appliance, do not use steam cleaners.
10. NEVER try to put out the fire with water. Only shut down the device circuit and then cover the flame with a cover or a fire blanket.
11. Children under 8 years of age should be kept away if they cannot be monitored continuously.
12. Touching the heating elements should be avoided.
13. CAUTION: Cooking process shall be supervised. Cooking process shall always be supervised.
14. The appliance is not suitable for use with an external timer or a separate remote control system.
15. This device can be used by children over 8 years of age, people with physical, hearing, or mental challenges, or people with lack of experience or knowledge; as long as control is ensured or information is provided regarding the dangers.
16. This device has been designed for household use only.
17. Children must not play with the appliance. Cleaning or user maintenance of the appliance shall not be performed by children unless they are older than 8 years and supervised by adults.
18. Keep the appliance and its power cord away from children less than 8 years old.
19. Put curtains, tulles, paper, or any flammable (ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or flammable materials on or in the appliance.
20. Keep the ventilation channels open.

Product Usage Instructions

Installation

1. Before installation, ensure that the power supply is turned off and the hob is cool.
2. Place the induction hob on a stable and level surface.
3. Connect the hob to a suitable power source using the provided power cord.
4. Ensure that there is proper ventilation around the hob to prevent overheating.

Operating Instructions

1. Turn on the power supply and the hob will enter standby mode.
2. Select the desired cooking zone by touching the corresponding control panel.
3. Adjust the heat level by using the “+” and “-” buttons.
4. Place a compatible cookware on the selected cooking zone.
5. The hob will automatically detect the cookware and start heating.
6. Monitor the cooking process and adjust the heat level as needed.
7. To turn off the hob, press and hold the power button until it shuts down.

Cleaning and Maintenance

1. Ensure that the hob is turned off and cool before cleaning.
2. Wipe the surface of the hob with a damp cloth or sponge.
3. For stubborn stains, use a mild detergent or specialized hob cleaner.
4. Avoid using abrasive cleaners or sharp objects that may scratch the surface.
5. Regularly clean the ventilation channels to prevent blockage.

Safety Precautions

1. Always follow the important warnings specified in the user manual.
2. Keep children below the age of 8 and pets away from the hob during operation.
3. Do not store materials on the cooking surface to avoid fire hazards.
4. Avoid touching the heating elements as they may be hot during and after use.
5. Never attempt to extinguish a fire with water. Use a fire blanket or cover to smother the flames after shutting down the device circuit.

Frequently Asked Questions

Q: Can I use this induction hob for commercial purposes?

A: No, this induction hob is designed for domestic use only and should not be used commercially.

Q: Can I use steam cleaners to clean the appliance?

A: No, steam cleaners should not be used to clean the appliance. Use a damp cloth or sponge instead.

Q: Can children use this appliance?

A: Children over 8 years of age can use this appliance as long as they are supervised by adults. Children under 8 years old should be kept away from the appliance.

Dear Customer,
Thank you very much for your preference for products.
We recommend you to read the instruction manual carefully and keep it handy before you use this induction hob so that it maintains its quality just like the first day you bought it and serves you most efficiently.

NOTE
This instruction manual has been prepared for a variety of models. Some of the features specified in the manual may not exist in your device. These features are marked with an asterisk (*).
Our devices are designed for domestic use. They are not for commercial use.
PLEASE READ THE INSTRUCTIONS BEFORE YOU INSTALL OR USE THİS DEVICE.
This product has been manufactured in an environmentally-friendly and modern plant without harming the nature.
Conforms with the WEEE Regulations.

IMPORTANT WARNINGS

1. Installation and repair should always be performed by “AUTHORIZED SERVICE”. Manufacturer shall not be held responsible for operations performed by unauthorized persons.
2. Please read this operating instructions carefully. Only by this way you can use the appliance safely and in a correct manner.
3. The cooker should be used according to operating instructions.
4. Keep children below the age of 8 and pets away when operating.
5. WARNING: Fire hazard; do not store the materials on the cooking surface.
6. WARNING: The appliance and its accessible parts are hot during operation.
7. Setting conditions of this device are specified on the label. (Or on the data plate)
8. The accessible parts may be hot when the grill is used. Small children should be kept away.
9. WARNING: This appliance is intended for cooking. It should not be used for other purposes like heating a room.
10. To clean the appliance, do not use steam cleaners.
11. NEVER try to put out the fire with water. Only shut down the device circuit and then cover the flame with a cover or a fire blanket.
12. Children under 8 years of age should be kept away, if they cannot be monitored continuously.
13. Touching the heating elements should be avoided.
14. CAUTION: Cooking process shall be supervised. Cooking process shall always be supervised.
15. The appliance is not suitable for use with an external timer or a separate remote control system.
16. This device can be used by children over 8 years of age, people with physical, hearing or mental challenges or people with lack of experience or knowledge; as long as control is ensured or information is provided regarding the dangers.
17. This device has been designed for household use only.
18. Children must not play with the appliance. Cleaning or user maintenance of the appliance shall not be performed by children unless they are older than 8 years and supervised by adults.
19. Keep the appliance and its power cord away from children less than 8 years old.
20. Put curtains, tulles, paper or any flammable (ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or flammable materials on or in the appliance.
21. Keep the ventilation channels open.
22. Do not heat closed cans and glass jars. The pressure may lead jars to explode.
23. Do not use the product in states like medicated and/or under influence of alcohol which may affect your ability of judgement.
24. After each use, check if the unit is turned off.
25. Be careful when using alcohol in your foods. Alcohol will evaporate at high temperatures and may catch fire to cause a fire if it comes in contact with hot surfaces.
26. If the appliance is faulty or has a visible damage, do not operate the appliance.
27. Do not touch the plug with wet hands. Do not pull the cord to plug off, always hold the plug.
28. Do not put objects that children may reach on the appliance.
29. The packaging materials are dangerous for children. Keep packaging materials away from the reach of children.
30. Cooker supply can be disconnected during any construction work at home. After completing the work, re-connecting the cooker shall be done by authorized service.
31. Do not place metal utensils such as knife, fork, spoon on the surface of the appliance, since they will get hot.
32. To prevent overheating, the appliance should not be installed behind of a decorative cover.
33. Turn off the appliance before removing the safeguards. After cleaning, install the safeguards according to instructions.
34. Cable fixing point shall be protected.
35. CAUTION: If the glass of the stove is broken, turn off any heating element immediately and disconnect the appliance from power source, do not touch the surface of the appliance and do not use the appliance.
36. User should not handle the cooker by himself.
37. When not turning of the cooker during cooking, user can touch hot surfaces causing burns.
38. If heavier loads are places on the cooker, these loads can trip over. It may cause personal injuries.
39.  WARNING: As the induction surfaces generate a magnetic field, it may cause harmful effects for people using medical devices such as pacemakers or insulin pumps.
40.  WARNING: When induction furnaces are operated at high power or based on the material of the pan base, it may emit certain noises. This is normal.

Electrical Safety

1. Plug the appliance in a grounded socket protected by a fuse conforming to the values specified in the technical specifications chart.
2. Have an authorized electrician set grounding equipment. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations.
3. WARNING: If the surface is cracked, turn off the appliance to avoid risk of electric shock.
4. Never wash the appliance by spraying or pouring water on it. There is a risk of electrocution.
5. Do not touch the plug with wet hands. Do not pull the cord to plug off, always hold the plug.
6. Unplug the unit during installation, maintenance, cleaning and repair.
7. Make sure the plug is inserted firmly into wall socket to avoid sparks.
8. If the power supply cord (the cord with plug) is damaged, this cord shall be replaced by the manufacturer or its service agent or an equally qualified personnel to prevent a hazardous situation.
9. Do not use cut or damaged cords or extension cords other than the original cord.
10. Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.
11. Make sure there is no liquid or humidity in the outlet where the product plug is installed.
12. An omnipolar switch capable to disconnect power supply is required for installation. Disconnection from power supply shall be provided with a switch or an integrated fuse installed on fixed power supply according to building code.
13. The power supply cord (the cord with plug) shall not contact the hot parts of the appliance.
14. Unplug the unit during installation, maintenance, cleaning and repair.
15. Appliance is equipped with a type ‘’Y’’ cord cable.
16. The circuit breaker switches of the cooker shall be placed so that end user can reach them when the cooker is installed.
17. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For appliances with over voltage category below III, disconnection device shall be connected to fixed power supply according to wiring code.
18. Do not remove ignition switches from the appliance. Otherwise, live electric cables can be accessed. It may cause an electric shock.

Methods for Protecting Ceramic Glass Cooking Surface From Damage

Ceramic glass surface is not sensitive to heat (up to 650°C) and temperature fluctuations. It is unbreakable and scratch-resistant to a certain degree. However, to avoid any damage, please do the following:

1. Never pour cold water on hot stoves.
2. Do not stand on a ceramic glass plate.
3. Sudden pressure, for example, the effect of a falling salt shaker may be critical. So, do not place such objects on a place above the hobs.
4. After each use, make sure that the base of the cooking pot and surfaces of cooking zones are clean and dry.
5. Do not peel vegetables on the hob surfaces. Sand grains falling from the vegetables may scratch the ceramic glass plate.
6. Do not lay flammable materials such as cardboard or plastic on the oven. Objects such as tin, zinc, or aluminium (as well as aluminium foils or empty coffee pots) may melt on hot cooking surfaces and thus cause damage.
7. Take care not to let sugary foods or fruit juices contact the hot cooking zones.The ceramic glass surface may be stained by these.

Intended Use

1. This product is designed for home use. Commercial use of the appliance is not permitted.
2. This appliance may only be used for cooking purposes. It shall not be used for other purposes like heating a room.
3. The manufacturer assumes no responsibility for any damage due to misuse or mishandling.
4. Operational life of the product you have purchased is 10 years. This is the period for which the spare parts required for the operation of this product as defined is provided by the manufacturer.

Electrical Connection

1. Setting conditions of this appliance is indicated in tag or data plate.
2. Your appliance should be plugged in a fuse appropriate for electric power. If necessary, it is recommended that installation is done by authorized service.
3. Your appliance is configured in accordance with electrical supply of 220-240V AC/380-415V3N AC 50/60Hz.
4. If main electrical network is different from these values, contact with your authorized service.
5. Electrical connections of your appliance should only be made to the fuses having suitably wired grounding (grounded) system. If no convenient fuse is available in the place where your appliance is to be installed, contact with authorized service immediately. Manufacturing firm is not responsible definitely for the damages that fuses whose grounding is not made and connected to the appliance can cause.
6. Plug of the appliance should be close to be accessed easily to the fuse whose grounding is made without use of extension cord.
7. Do not allow contacting the power cable of your appliance with hot regions. Similarly, keep away it from sharp edges and corners.
8. If feeder cord is damaged, this cord should be replaced either by manufacturer or its service agency or same degree qualified personnel in order to hinder a dangerous situation.
9. Wrong electrical connection may give damage to the appliance.In this case, your appliance will remain out of guarantee scope. Electrical connection of your appliance should be done by authorized service.

Electrical Connection Scheme

Connect the cables as specified below.

WARNING!

220-240V 50/60 Hz. power supply is suitable for single phase connection, and 380-415V 50/60 Hz. power supply is suitable for double phase connection.

INTRODUCTION OF THE APPLIANCE

1. Upper left cooking area
2. Lower left cooking area
3. Upper right cooking area
4. Lower right cooking area
5. Glass surface
6. Control panel

Technical Features

WARNING!

• For the modification to be done by authorized service, this table should be considered. Manufacturer may not be held responsible for any problems rising because of any faulty modification.
• In order to increase the product quality, the technical specifications may be changed without prior notice.
• The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

INSTALLATION OF COOKTOP

Check if the electrical installation is proper to bring the appliance in operating condition. If electricity installation is not suitable, call an electrician and plumber to arrange the utilities as necessary. Manufacturer shall not be held responsible for damages caused by operations performed by unauthorized persons.

WARNING!

• It is customer’s responsibility to prepare the location the product shall be placed on and also to have the electrical installation prepared.
• The rules in local standards about electrical installations shall be followed during product installation.
• Check for any damage on the appliance before installing it. Do not have the product installed if it is damaged. Damaged products cause a risk for your safety.

Correct Place For Installation

Product is designed in accordance with the kitchen counters supplied from market. A safe distance should be left between the product and kitchen walls and furniture.
If hood/aspirator will be installed over your appliance, obey to the recommendation of hood/aspirator
manufacturer for assembly height. (min. 65 cm) The gap that cooktop is to be placed on the counter should be cut in line with cooktop installation dimensions.
For installation of the product, the rules specified in local standards related to electricity should be complied.

Application Of A Strip Under The Appliance

A strip shall be affixed to the bottom of the appliance to prevent substances that may overflow, such as water and oil, from entering the appliance in case of any overflow while cooking and heating. Place the appliance on the drain on the countertop by gently pressing it. If there is a built-in oven under the appliance, kitchen furniture shall be arranged to allow ventilation.

Installation
When product is mounted on a drawer, if it is possible to touch lower side of product, this section should be separated with a wooden shelf.

While mounting cooktop on a closet, as shown in the figure above, in order to separate between closet and cooktop, a shelf should be mounted. If it is mounted on a built-in oven, there is no need to do that.
If your cooktop will be mounted next to right or left wall, the minimum distance between wall and cooktop should be 50 mm.
At the back of the furniture as shown below leave a venting gap of 180 cm² (450 x 40 mm) is required.

Installation Diagram

1. Turn the cooktop down and place on smooth ground.
2. In order to prevent entrance of foreign substances and liquids between cooktop and counter, apply the paste given in package to the sides of lower guard of counter. For corners, curl paste and increase curls till filling corner gaps.
3. Turn cooktop again and align with and place on counter.
4. Fasten up your cooktop on counter by using the clamp and screws supplied.

Counter Cut-Off Sizes
Note the following values while installing your stove or cutting the counter.
The gap on which the hob is placed must be cut in accordance with the dimensions of hob installation.

USING YOUR APPLIANCE

1. To turn the device on and off, press and hold the on/off button until you hear a “beep”. When the unit is turned on, the heat zone indicators shall be displayed.
2. The controls react to touching, so you do not need to apply any pressure to the controls.
3. Place a suitable pot, pan, etc. on the cooking area that you want to use.
4. Make sure that the base of the pot, pan, etc. you have placed and the surface of the cooking area are clean and dry.
5. When you touch the heating zone selection control, the indicator next to the key you are touching shall flash.
6. You can set the temperature by touching the sliding control of the heating zone you desire. (Applies to products with slider control, see fig. 1)
7. Use the bottom, not the tip of your finger while using the device. You shall hear a “beep” at every touch.
8. Make sure that the touch controls are always clean and dry. Even a thin layer of water may make it difficult for touch controls to work.

INDUCTION STOVE ELECTRONIC CARD MANUAL

1. On/Off function
2. Timer down
3. Cooking area temperature level
4. Timer up
5. Automatic quick cooking function
6. Child lock function
7. Lower left cooking area
8. Upper left cooking area
9. Upper right cooking area
10. Lower right cooking area
11. Timer function

NOTE
The unit is ready to operate 1 second after it is connected to the mains power supply. All the LEDs and indicators are illuminated for 1 second.

Turning the appliance on
The unit is switched on by pressing the symbol is displayed on all indicators. If the glass temperature above the hob is above 45 °C, the symbols are displayed on the screen of corresponding hob one after the other.

Turning the appliance off
The unit is switched off by pressing the button. Even if the child lock is active on the timer indicator, it is possible to switch off the appliance by pressing the button.

WARNING!
The electronics remain active for 1 minute. If there is no cooking level or selected timer in this time interval, the appliance shall automatically switch to “Off Mode” with a beep.

NOTE
If symbol is flashing on any of the displays of the hob, the hob switches off automatically after 60 seconds when the symbol disappears.

Residual heat indicator
If symbol is flashing on the touch panel of the stove, then the relevant hob is still hot. It can be used to heat a small amount of food.

WARNING!

• When the power is cut off, the heat indicator does not light up and does not warn the user against the heat.
• The residual heat indicator of each cooking zone remains active until the measured glass temperature is lower than + 45 °C.

Turning the Cooking Areas On

1. Stove is switched on by pressing the button.
2. Relevant hob is selected by pressing the symbol once. Symbol flashes for 5 seconds at the display of the selected hob. symbol is displayed at all other displays.
3. By sliding your finger to the left or right on the slider, you may adjust the power level of the relevant hob from 1 to 9.

Turning the Cooking Areas Off:

A selected hob may be turned off in 3 ways.

1. It may be turned off by pressing the key.
2. After selecting the relevant hob, it is brought to the temperature level . Temperature value flashes for 5 seconds. symbol flashes if the relevant hob is still hot at the end of this period. symbol is displayed if the relevant hob is not hot.
3. Relevant hob may be switched off by setting a timer for it. When the time has expired, the hob set by the timer automatically switches off with a beep.

Child Lock Function

1. Child lock is activated by pressing key once to prevent undesired operations.
2.  symbol is displayed on the timer display.
3. When the key lock is activated, all buttons except the ON/OFF control are deactivated.
4. To deactivate the child lock function, just press and hold the key for 3 seconds. symbol on the timer
   indicator is turned off when the time has expired.
   If the child lock function is active before switching off the stove, it shall be active when the stove is turned on again.
   When the xxx key is pressed, symbol is displayed again on the timer display. Child lock shall be deactivated to operate the hob again.

WARNING

• Child lock is deactivated in case of a power outage.
• When the child lock is active, symbol and remaining time are alternatively displayed on the timer display if timer is active, too ( = 2 seconds, remaining time = 2 seconds).

Timer function

There are two types of timer functions.

INDEPENDENT TIMER FUNCTION
It may be set when setting mode of any hob is not active. It may be used as an alarm, too. Independent timer continues to operate when any cooking area is started to be used (level > 0). Timer may be set as long as the timer selection is active (the minute on the display flashes for 5 seconds).

To set the timer

1. Timer may be set from 1 to 99 minutes by using the keys when the stove is on or timer may be set from 1 to 99 minutes by pressing the symbol once and then using keys when the stove is on.
2. Countdown starts directly with the final setting after the timer is set. After 5 seconds, timer setting mode period ends automatically and timer display indicates the set time value.

To change the time for independent timer
After pressing the symbol once, it may be reset to the desired time using keys, or the time may be changed directly by the keys without selecting the timer.
Buzzer sounds when the set time has expired and timer display flashes . Just press any key on the touch panel to end the buzzer.

WARNING!

• Buzzer ends automatically after 2 minutes when no key is touched.
• Turning off the stove (pressing on/off button) stops the independent timer. Timer does not resume when the stove is turned on.

COOKING AREA TIMER FUNCTION

To set the timer

1. Select the relevant hob to be set while the stove is on.
2. Set the temperature level to the desired level from 1 to 9 using the slider.
3. After pressing the symbol once while temperature level setting period is active (for 5 seconds), the desired time is set using keys, or the desired time is set directly by the keys.
   The point next to the temperature level on the hob, for which the remaining time is being displayed, flashes.

WARNING!

If more than one timer is active, timer display indicates the lowest remaining time value after the 5-second setting
period. The point next to the hob, for which the remaining time is being displayed, flashes.
A buzzer sounds and the programmed cooking area finishes the cooking function after the set time has expired.
symbol is displayed on the touch screen and the symbol flashes if the cooking area is still hot.

Pot identification / focusing (No Pot Warning)
Power is applied to the area covered by the base of the pot on the relevant hob only for induction cooking. Base of the pot is detected by the induction system. Cooking is stopped if there is no pot (either there is no pot or the pot is not induction-compliant) when the cooking is started or if the pot is removed from the hob while cooking. No pot warning is displayed on the touch panel for the relevant hob after 5 seconds .
No pot warning lasts 55 seconds. If there is no pot on the hob when this time has expired, cooking area is turned off automatically and the panel displays the symbol or the symbol if the cooking area is hot.

WARNING!
symbol flashes for 55 seconds on the relevant that gives the no pot warning. Setting for cooking timer is also expired when this time expires.

High power function (boost)

You may use the high power function (boost) for cooking faster.

To use the boost function,

1. Determine the relevant hob, and set the desired power level from 1 to 9.
2. Activate the boost function by pressing boost key once and the symbol flashes for 5 seconds on the display for the relevant hob.
   The maximum period for   function is 5 minutes. When the time has expired, the relevant hob resumes cooking with power level initially set.
   You may end the function using the slider for the relevant hob.

WARNING!
Boost function cannot be set at the same time for the vertical hobs.

Automatic quick cooking function (auto)

Automatic quick cooking function facilitates cooking. AUTO time for automatic quick cooking varies as per the selected power level. Times are given in the table below.

To use the auto cooking function
Determine the relevant hob for cooking while the stove is on, and set the desired power level using the slider.
Press  AUTO once while the setting mode is active and auto quick cooking shall be activated for the period of the selected power level. ‘A’ symbol flashes for 5 seconds on the display of the relevant hob. You may end the auto cooking function using the slider after selecting the relevant hob.

Error codes and recommended solutions
The table below provides the error codes, possible causes and recommended solutions for these codes.

the manufacturer
F9 / FA| IGBT temperature sensor error| Please contact the manufacturer
E1 / E2| Improper supply voltage| Please check whether the supply voltage is normal
E3| Induction stove coil temperature sensor high temperature warning| Please contact the manufacturer
E5| IGBT temperature sensor high temperature warning| Please start cooking again after the pot is cooled

Selection Of The Right Pot

1. Place suitable amount of food to the pots and pans. Thus, you may prevent overflowing of meals and avoid unnecessary cleaning.
2. Do not use containers that are unstable and that may be easily tipped over on the cooktop.
3. Do not put empty pots and pans on the hobs with their flames on.
4. Do not put containers that may be affected by heat on the product.
5. Do not operate the hobs without any pots and pans placed on them.
6. Do not place the lids of the pots and pans on the hobs.
7. Keep the lid of container you use for heating oil open.
8. Do not put oil with a volume more than one third of the pan. Do not leave the oil unattended when the oil is being heated. Extremely hot oils may cause fire.
9. Use pots and pans with machined bases only. Sharp edges cause scratches on the surface.
10. Glass, ceramic and earthen pots, copper- or aluminium-based non-magnetic stainless steel pots shall not be used.
11. Put the suitable pots by centering them on the hobs.

12. Do not use pots with concave or convex bases.

13. When you want to put the pot on another hob, take the pot up and place it again instead of sliding it.

14. You may use steel, teflon or special magnet-based aluminium cookware with a label or warning that indicates it is compatible for induction on your induction stove.

15. You can check if the pot is suitable for the induction stove. Move a magnet towards the base of the pot. If it is pulled, your pot is suitable for an induction stove.

16. It is important that you use metal cookware specially designed and / or approved for induction stoves.

WARNING!
Do not allow melamine or plastic containers to come into contact with the heating zones.

Cooking Applications
Use your appliance at a suitable heating setting for cooking.

CAUTION!
Information on the table above is only for guidance.

Hobs

CAUTION!
Cooking information provided on the table are for informative purposes only.

CLEANING AND MAINTENANCE OF THE APPLIANCE

1. Always unplug the appliance before starting any maintenance or cleaning. Wait until the stove cools down if it is hot.
2. Do not use abrasive clothes, spray cleaners or sharp objects for the cleaning of the glass tray.
3. Clean remains of burnt food with a damp, soapy cloth. Dust on the surface shall be cleaned with a damp cloth.
4. Discolourations that may occur on the ceramic glass surface do not affect the functional structure and permanence of the glass. Discolouration is not caused by a change in the material, but it is due to the fact that burnt remains on the surface are not cleaned, that the pots used wear the glass surface and that unsuitable cleaning materials are used.
5. To ensure that your stove has a long economic life, it shall be regularly cleaned and maintained.
6. Do not clean your stove with hard tools such as a hard brush, steel wool or a knife. Do not use abrasive and acidic materials or detergents.
7. After cleaning the parts of the appliance with a soapy cloth, rinse and dry them thoroughly with a soft cloth.
8. Clean glass surfaces with special glass cleaning materials. Do not use abrasive cleaners or sharp metal scrapers to clean the glass surfaces as the scratching of the glass surfaces may cause the glass to break.
9. Do not clean your stove using steam cleaners.
10. Do not use flammable materials such as acids, thinner or gas to clean your stove.
11. Do not wash any component of your stove in a dishwasher.
12. Quickly clean any material containing vinegar, lemon, salt, coke and similar acids and alkalines that spill over your stove.

RECOMMENDATIONS FOR ENERGY SAVING

1. Induction cooking zones automatically adapts to the size of the pot base to some extent.
2. Place the pot in the cooking zone before turning the heater on. The induction heaters have a sensor that detects the presence of a pot.
3. Use pots with their lids closed to shorten the cooking times.
4. Lower the heating setting when it starts to boil. Do not exceed the amount of water and oil to shorten the cooking time.
5. Use your appliance at a suitable heating setting for cooking.

HANDLING RULES

1. Handle and transport in the original packaging.
2. Pay maximum attention to the appliance while loading / undloading and handling.
3. Make sure that the packaging is securely closed during handling and transportation.
4. Protect the appliance from external factors (such as humidity, water, etc.) that may damage the packaging.
5. Be careful not to damage the appliance due to bumps, crashes, drops, etc. while handling and transporting and not to break or deform it during operation.

TROUBLESHOOTING

You may solve the problems you may encounter with your product by checking the following points before calling the technical service.

If The Appliance Does Not Operate

1. Check if power cable of cooktop is plugged in.
2. Examine with safe ways if electric exists on network.
3. Audit fuses.
4. Control whether damage is available on power cable.

ENVIRONMENTALLY-FRIENDLY DISPOSAL

Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the frame work for the return and recycling of used appliances as applicable throughout to the EU.

PACKAGE INFORMATION
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

tesla.info

References

• Tesla.info | Technology for all

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>