brother MFC-L3730CDN Colour LED Laser Printer User Guide

brother MFC-L3730CDN Colour LED Laser Printer

Unpack The Machine And Check The Components

• Drum Unit and Inbox Toner Cartridge

• Telephone Line Cord Adapter (Australia only) (For MFC models)

• Telephone Line Cord (For MFC models)

• AC Power Cord (only for certain models)

• Brother Installation Disc

• Quick Setup Guide Reference Guide (only for certain models) Product Safety Guide

Watch our Video FAQs for help with setting up your Brother machine: support.brother.com/videos.

NOTE:

• The components included in the box may differ depending on your country.

• The available connection interfaces vary depending on the model.

• Interface cables are not included. You must purchase the correct interface cable if you require one.
  USB cable
  We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long.
  Network cable
  Use a straight-through Category 5 (or greater) twisted-pair cable.

• The illustrations in this Quick Setup Guide show the MFC-L2710DW.

• The Reference Guide is available on the provided Brother Installation Disc in countries where it is not included in the box.

Instruction For Use

Remove the packing materials and install the drum unit and toner cartridge assembly

• Remove the orange part.
  

• Push firmly
  
  

Load paper in the paper tray

• Adjust the paper guides.
  

• Do not exceed this mark
  
  

Connect the power cord and turn the machine on

• Back
  

• Front
  

Select your country/language (Initial setup only)

After turning the machine on, you may be required to set your country or language (depending on your machine).
If required, follow the on-screen instructions.

Select your language (if needed)

1. (for DCP models)
   a. Press Menu.
   b. Press ▲ or ▼ to display [Initial Setup], and then press OK.
   c. Press ▲ or ▼ to display [Local Language], and then press OK. (for MFC models) Press Menu, 0, 0.

2. Press ▲ or ▼ to select your language, and then press OK.

3. Press Stop/Exit.

Select a device to connect to your machine

Computer

Go to 7 and follow the instructions.

NOTE:
We recommend configuring wireless settings from your computer.

Mobile Device

Go to 8 and follow the instructions.

Connect your computer

Put the installation disc into your CD/DVD drive, or download the Full Driver & Software Package at:

For Windows®: support.brother.com/windows
For Mac: support.brother.com/mac

If you are using a recently released operating system on your computer, visit the above websites for updated driver and software information.

Brother regularly updates firmware to add features and apply bug fixes. To check for the latest firmware, visit support.brother.com/up5.

Follow the on-screen instructions and prompts

For Windows®:
If the Brother screen does not appear automatically, go to Computer (This PC). Double-click the CD/DVD-ROM icon, and then double-click start.exe.
For Mac:
For full driver functionality, we recommend choosing the CUPS driver when adding a printer.

Finished

Can’t Connect? Check the following:

• Wireless network
• Wired network
• USB connection
• Restart your wireless access point/router (if possible).
• Disconnect the cable.
• Restart your machine and computer, and then go to 7 .
• If still not successful, go to 8 .
• If still not successful, visit support.brother.com for FAQs & Troubleshooting.

Alternative wireless setup

Even if you do not have a wireless access point/router, you can connect your device and your machine directly. For additional wireless network support, go to support.brother.com/wireless-support.

Find your SSID (Network Name) and Network Key (Password) on your wireless access point/ router and write them in the table provided below.

SSID (Network Name)|
---|---
Network Key (Password)|

To select each menu option, press ▲ or ▼, and then press OK to confirm.
Select [Network] > [WLAN] > [Setup Wizard], and then press ▲.

If you cannot find this information, ask your network administrator or wireless access point/router manufacturer.

Select the SSID (Network Name) for your access point/router and enter the Network Key (Password).
When the wireless setup is successful, the LCD displays [Connected].

If setup is not successful, restart your Brother machine and your wireless access point/router, and repeat 8 .

For Computer

Go to 7 to install software.

For Mobile Device

Go to 9 to install apps.

Print or scan using your mobile device

Your mobile device must be connected to the same wireless network as your Brother machine.

AirPrint is available for Apple device users. You do not need to download any software to use AirPrint. For more information, see the Online User’s Guide.

Download and install the Mopria® Print Service app from Google Play™ using your Android™ device.

Download and install our free application Brother iPrint&Scan from a mobile application store, such as the App Store, Google Play™ or Microsoft® Store using your mobile device.

Brother SupportCenter is a mobile app that provides the latest support information for your Brother product.
Visit the App Store or Google Play™ to download.

Optional apps

You can print from and scan to your mobile device using various apps.
For instructions, see the Online User’s Guide.

Customer Support

Additional Wireless Support: support.brother.com/wireless- support
For FAQs, Troubleshooting, and to download software and manuals, visit support.brother.com. For product specifications, see the Online User’s Guide. © 2017 Brother Industries, Ltd. All rights reserved.

References

• Brother Solutions Center
• Brother Solutions Center
• Brother Solutions Center
• Brother Solutions Center
• Brother Solutions Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>