KLH 405KEN2BBK Kendall 2B Bookshelf Loudspeaker Owner’s Manual

KLH 405KEN2BBK Kendall 2B Bookshelf Loudspeaker

Specifications

• Product Name: Kendall 2B Bookshelf Loudspeaker
• Brand: KLH
• Model: Kendall mk2 Collection
• Amplification: Bi-amplification capable
• Placement: Recommended at least 6 feet apart

WELCOME

Thank you for purchasing one of the best-sounding loudspeakers ever produced. At KLH, we have been making high-quality components since 1957, and we take pride in making your music and movies the best experience possible.

Safety Instructions

1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other heat-producing appliances
9. ONLY USE attachments/accessories specified by the manufacturer.
10. DO NOT expose to excess moisture or liquids, and do not place containers with liquids on top of speakers.

Warning

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Danger

The lightning flash with arrowhead symbol within anequilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons

WEEE NOTICE

Note: This mark applies only to countries within the European Union (EU) and Norway.

This appliance is labeled in accordance with the European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

UNPACKING

To unpack the loudspeaker:

1. Place the package on the floor or tabletop with the box flaps up.
2. Cut the tape with a utility knife to open the package.
3. Fold the carton flaps back and carefully slide the speaker and packaging from the box, or turn the box over with flaps open and remove the box.
4. Stand the speaker and pack upright, making sure the speaker is right side up, and remove the packing material.

IMPORTANT SYMBOLS

The following symbols are used in the literature accompanying the product:

• The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions.
• The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel.

EU COMPLIANCE INFORMATION

This product is eligible to bear the CE mark and conforms to the following European Union Directives:

• European Union EMC Directive 2004/108/EC
• European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EC
• European Union WEEE Directive 2002/96/EC

KLH and the KLH logo are registered trademarks of Kelley Global Brands Inc., registered in the U.S. and other countries.

CONNECTING YOUR BOOKSHELF LOUDSPEAKERS

This bookshelf loudspeaker has the same quality nickel-plated binding posts that will accommodate stripped wire, spade connectors or banana plugs. Be sure to use quality speaker cables, up to 12 gauge (AWG). The lowest gauge possible is recommended. Before using banana plugs, be sure to remove the black and red inserts on the binding posts. The straps connecting the binding posts should remain in place for conventional wiring, but may be removed where bi-wiring is preferred. See the following diagrams in the AMPLIFICATION section for further instructions.

AMPLIFICATION

Conventional amplification involves a single stereo amplifier wired to a single set of binding posts with straps connecting the second set of posts as seen in diagram above.
Simply attach the positive wire + to the red post, and the negative wire – to the black post.

ROOM POSITION

Placement of your bookshelf loudspeakers is a personal preference, but it is recommended that speakers be placed at least 6 feet apart whether they are being used for a stereo application or as the main left and right channels for a home theater. For best imaging and separation, the listening distance from the speakers should be about 1.5 times the distance the speakers are apart from each other.

Example: If the distance between each speaker and the listening position is 9 feet, then the speakers should be 6 feet apart from one another. Be sure that loudspeakers are placed at least 12 inches away from any wall. Further adjustments can be made to optimize your listening experience.

BI-AMPLIFICATION

This connection method uses two separate two-channel amplifiers to power one set of speakers. One amplifier is attached to one set of binding posts, and another identical amplifier is attached to the other set of binding posts. This is referred to as bi-amplification.

NOTE: Binding post wrench is included

WARRANTY

Our 10 year warranty begins from purchase date of the item. (Receipt Date) Warranty registration must be completed at KLHAUDIO.com/warranty. Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable.
The following is NOT COVERED by the warranty:

1. Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
2. Incorrect use of product.
3. Altered serial number.
4. Transportation costs for service call.
5. Purchase of KLH products from unauthorized reseller.

Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement. KLH toll free number is 1-833-554-8326

FAQ (Frequently Asked Questions)

Q: Can I dispose of the loudspeaker with household waste?

A: No, this product should not be disposed of with household waste. It should be deposited at an appropriate facility for recovery and recycling.

Q: Can I open the loudspeaker to perform maintenance or repairs?

A: No, there are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

Q: How should I place the loudspeakers in my room?

A: It is recommended to place the speakers at least 6 feet apart, ensuring they are at least 12 inches away from any wall.

Q: What is bi-amplification?

A: Bi-amplification is a connection method that uses two separate two-channel amplifiers to power one set of speakers.

References

• Premium Home Audio Speakers | KLH Love Your Music!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>