KLHF00015 Windsor 10-Inch Powered Subwoofer Instruction Manual

: June 6, 2024
: KLH

Table of Contents

KLHF00015 Windsor 10-Inch Powered Subwoofer
UNPACKING
CONNECTING YOUR SUBWOOFER
LFE CONNECTION
LEFT/RIGHT PREAMP OUT
POWER SWITCH/AUTO/ON
CROSSOVER
SPECIFICATIONS
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

KLHF00015 Windsor 10-Inch Powered Subwoofer

UNPACKING

Place the package on the floor or table top with the box flaps up. Cut the tape with a utility knife to open the package. Fold the carton flaps back and carefully slide the subwoofer and packaging from the box, or turn the box over with flaps open and remove the box. Stand the subwoofer and packing upright, making sure the subwoofer is right side up, and remove the packing material.

CONNECTING YOUR SUBWOOFER

Ensure that the subwoofer is unplugged from a power source (wall outlet) before making any connections to your amp/- receiver.

LFE CONNECTION

Connect RCA connector from LFE output on your amp/receiver to LFE input on the subwoofer.

LEFT/RIGHT PREAMP OUT

If there is no LFE output on your amp/receiver, you can use the left and right preamp outputs to connect to the left and right inputs on your subwoofer.

POWER SWITCH/AUTO/ON

The POWER ON switch near the bottom supplies power to the sub amplifier. When the AUTO/ON switch is in the AUTO position, the subwoofer will automatically turn on when it senses a signal. The sub-woofer will automatically go into standby mode after 15 minutes with no signal. When this switch is in the ON position, the subwoofer will remain on.

CROSSOVER

This control affects the upper-frequency limit of the subwoofer. The control range is 40-180 Hz, along with a disable (LFE) setting. The slope of the low pass filter is 12 dB/octave. For connection to an A/V receiver, the low pass should be set to LFE. For 2-channel applications, it should be adjusted to blend with the bottom roll-off frequency of your loudspeakers.

VOLUME CONTROL
This control affects the output of your subwoofer and should be set at the lowest level before turning the power on. Volume can be increased until the desired level is achieved. For 2-channel applications, you should adjust the volume to match the output of your speakers.

PHASE CONTROL
This control delays the signal being processed through the amplifier. For connection to an A/V receiver, it should be set to 0 degrees. For 2-channel systems, it should be adjusted to obtain optimal transition between the loudspeakers and the subwoofer, and the best sound stage
ROOM POSITION
The placement of your subwoofer can add a significant difference to the performance of your home theater system. Low frequencies are omnidirectional, but best performance results if you place the subwoofer in the corner, as this will increase the level of bass output. You can experiment with different configurations, or even add multiple subwoofers to your system (see diagram).

NOTE : When cleaning your subwoofer, avoid the use of abrasives, solvents, or harsh detergents. Windsor subwoofers have a long-lasting vinyl finish that should only require dusting or cleaning with a dry cloth. Gently use the brush attachment of your vacuum cleaner to remove any dust or particles from the surfaces of your subwoofer.
WARRANTY
Our 5-year warranty begins from the purchase date of the item. (Receipt Date) Warranty registration must be completed at KLHAUDIO.com/warranty. Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact the authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable. The following is NOT COVERED by the warranty:

Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
Incorrect use of the product.
Altered serial number.
Transportation costs for a service call.
Purchase of KLH products from unauthorized resellers.

The replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement. KLH toll-free number is 1-833-554-8326