TESLA MS100 Multi Sterilizer User Manual
- June 17, 2024
- Tesla
Table of Contents
TESLA MS100 Multi Sterilizer
DESCRIPTION
CONTROL PANEL
WARNING
- Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children. Do not attempt disassembly or use with incompatible components. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to setup or use, in order to operate correctly and avoid damage or serious injury.
IMPORTANT SAFEGUARDS
This product is for household use only. When using electrical appliances,
basic safety precautions should always be followed, including the following:
-
Read all instructions.
-
Do not touch hot surfaces. Use handles or knobs.
-
To protect against electrical shock, do not immerse cord or plugs in water or other liquid.
-
Close supervision is necessary when any appliance is used by or near children.
-
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
-
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair; or adjustment
-
Do not use outdoors..
-
Do not let cord hang over the edge of the table or counter; do not let it touch hot surfaces.
-
Do not place on or near a hot gas or electric burner in a heated oven.
-
Extreme caution must be used when moving an appliance containing hot liquids.
-
To operate, plug cord into wall outlet To disconnect turn any control to „off,“ then remove plug from wall outlet.
-
Do not use an appliance for other than intended use.
-
A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
-
Longer extension cords may be used if care is exercised in their use.
-
If a longer extension cord is used, the marked electrical rating of the extension cord should be at least as great as
the electrical rating of the appliance, and the cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. The extension cord should be a grounding-type 3-wire cord. -
Never immerse the warmer or power cord in water.
-
When in use, the warmer contains hot water. Be careful to avoid spilling or splashing any water on yourself when removing contents from the warmer.
-
Before serving, be sure food is at a safe temperature.
-
Before serving, unplug cord from wall outlet and dish. Do not leave the cord within child’s reach.
SAVE THESE INSTRUCTIONS
Thank you for buying our product. It has been designed and developed to
provide moms, dads and other caregivers an easy, reliable way to warm baby
bottles and baby food jars. The unit accommodates up to two baby bottles of
standard size. As parents, we know that sometimes feeding a young baby can be
a time of increased stress, especially if the baby is upset or fussing.
Preparing a bottle often has to be done while holding and com-forting the
baby.
Please read through the ENTIRE INSTRUCTION BOOK, including the IMPORTANT
SAFEGUARDS before using the product.
FUNCTION INSTRUCTION
-
Warm Milk
The function can choose “glass bottle“ plastic bottle“ and “silicone bottle“ according to the material of the bottle. The default temperature of the three functions is 45°C, and the adjustable temperature is 37°C to 55°C. Automatically keep warm for 24 hours. -
Heat Food Function
The default temperature of this function is 75°C, and the adjustable temperature is 45°C to 90°C. Automatically keep warm for 24 hours. -
Defrost
The default temperature of this function is 55°C and the adjustable temperature is 30°C to 90°C. Automatically keep warm for 24 hours. -
Boil Eggs
This function is to first heat to 100°C, and then shut down after working according to the pre-set time (1-30 minutes). -
Sterilize
This function is to first heat to 100°C, maintain 100° for 5 minutes and then automatically shut down. -
Formula Milk
The default temperature of this function is 45° and the adjustable temperature is 37°C to 75°C. Automatically keep warm for 24 hours. -
Yogurt Function
Yogurt Function: The default temperature of this function is 40°C, and the adjustable temperature is 40°C to 45°C. Automatically keep warm for 8 hours. -
Adjust Temp Function
When the milk warmer is already working, you can press „Adjust temp“ and when the screen flashes, you can adjust the preset temperature again. -
Preset Time Function
Press Preset Time, then press the + or – button to set the hour values. -
Set time range : within 24 hours.
TIPS
- Beep sounds after program is completed.
- Press „Preset time“ button after selecting program. Press „+“ or „-“ button to set the hour values. The time is set after the value stops blinking.
- Please be aware, when the „Sterilize“ or „Boil eggs“ functions are selected, the „Preset temp °C“ defaults to 100 °C. The heating duration is displayed in minutes when the temperature reaches 100 °C
- When the reservoir water evaporates, the machine automatically shuts off. Please allow it to cool down, fill with water and switch on again.
- Cool down for 30 minutes after each use to extend the service life of the milk warmer.
CAUTION
- The speed of the warmer in heating milk or baby food will be affected by many factors, including bottle quality, volume, or the initial temperature and environmental temperature (room temperature) of the milk or baby food.
- Always check the content temperature of the bottle or the small jar before feeding your baby.
- We recommend using distilled water to prolong the device lifecycle. If using tap water, it is recommended to decalcify from time to time.
HOW TO USE THE BOTTLE WARMER
- Place the product on a stable surface.
- Insert the bottle into the sterilizer.
- Pour in pure water. Make sure the bottles are full enough that they do not float.
- Cover the device with the lid. Turn on the power, select a function.
- Adjust the temperature and time if needed. After 5s, it will automatically enter the working state.
- Please test the temperature before feeding. You may put a few drops of milk on the back of your hand to test the temperature.
HOW TO USE THE STEAMING EGG RACK TO HEAT FOOD
- Place the product on a stable surface.
- Put the steaming rack in the body as the picture show.
- Put eggs or food bottle on the steaming rack.
- Pour in pure water. Make sure the eggs or bottles do not float.
- Cover the device with the lid. Turn on the power, select a function.
- Adjust the temperature and time if needed. After 5s, it will automatically enter the working state.
HOW TO USE MILK BOTTLE STERILIZE RACK
- Place the product on a stable surface.
- Put the steaming rack in the body as the picture show.
- Place the bottles upside down on the steaming rack
- Pour in pure water. Make sure the water level does not exceed the bottom of the sterilizing rack.
- Cover the device with the lid. Turn on the power, select a function.
- Adjust the temperature and time if needed. After 5s, it will automatically enter the working state.
CLEANING AND MAINTENANCE
- Please make sure to turn off the power before cleaning.
- Do not wash the product in water to avoid water damage.
- Transparent cover, bottle sterilize rack and other small parts can be washed in water with a soft sponge and detergent. Do not use a wire scrubber to clean in order to avoid damage to the surface.
- When the product isn‘t going to be used in a long time, please clean it and store it in the package box. Put it in a dry and ventilated place to avoid being affected by moisture.
- After use, let the product cool down before cleaning.
- Do not use oils, gasoline, detergent, hard brush or steel wire to clean, so as not to damage the surface of the product
WARNING!
- Do not clean the sterilizer directly under the tap.
- Do not immerse the sterilizer in the water.
CLEANING TIPS
- Limescale is a natural calcium precipitate formed when heating water. It will affect the service life of the product and should be removed in time.
- Mix vinegar and water in a ratio of 1 :2 into the sterilizer up to the MAX level marked inside. Select “Boil eggs“ program and let it run. After that replace the vinegar/water mixture with clean water and the product is ready to use.
- Constant temperature or heating for a long time can cause the milk to spoil. It is recommended that constant temperature or heating should not exceed 2 hours.
INFORMATION ABOUT DISPOSAL AND RECYCLING
- This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and
- European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.
EU DECLARATION OF CONFORMITY
- Hereby, Tesla Global Limited declares that the radio equipment type TSL-PC-MS100 is in compliance with Directive 2014/53/EU.
- The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc
- Manufacturer
- Tesla Global Limited
- Far East Consortium Building 121 Des Voeux Road Central Hong Kong
- www.teslasmart.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>