Blackstar ID:Core 40 V3 2×6.5″-inch 2 x 20 watt Stereo Combo Amp User Guide

Blackstar ID:Core 40 V3 2×6.5″-inch 2 x 20 watt Stereo Combo Amp

Product Information

Specifications

• Model: ID:CORE
• Type: Programmable amplifier
• Tone: Super Wide Stereo
• Control Set: Simple yet powerful
• Voicing: Clean to scream
• EQ: UK and American sound with Blackstar’s patented ISF control
• Weight: Lightweight
• Design: Compact

Product Usage Instructions

1. Setting Up

To engage the tuner mode, hold the REV switch for two seconds.

2. Choosing Your Sound

Choose a preamp voicing ranging from clean to scream and set  your gain and volume. Use the BlackstarISFEQ to blend your EQ between a UK and American sound. The recall indicator flashes when the knob passes the current setting.

3. Deep Editing and Patch Storing

Use the free Architect software for deep editing and storing of patches. Patches can be shared, uploaded, and downloaded via the online community at www.blackstaramps.com.

4. Default Patches

Here are some default patches:

1. Classic Clean – Plate Reverb
2. Boutique Clean – Spring Reverb
3. Classic Crunch – Phaser & Hall Reverb
4. Effects Modulation – Delay Reverb
5. Tremolo – Multi Plate
6. Modern Drive – Analogue Delay
7. Smooth Solo – Multiple Delay & Plate Reverb
8. Tight Metal Rhythm – Room Reverb

5. Accessories

Use a TRRS 3.5mm cable for easy input/output live streaming capability. You can also connect a Blackstar FS-18 footcontroller (sold separately) to control your amplifier. For power, you can use the PowerBank PB-1, which can power an instrument-based product (e.g., ID:CORE, ID:CORE BEAM, ACOUSTIC:CORE, or FLY CHARGE) for approximately 4-7 hours at medium volume or an audio-based product (e.g., Super FLY Active Cabinet) for approximately 12-16 hours at medium volume.

6. Audio Driver & Extra Features

For Windows, download the Blackstar Amplification USB Audio Driver QR. For Mac, download the Mac QRID:CORE USB driver.

FAQ

• Where can I download the CE declaration of conformity for my Blackstar product?
  • You can download the CE declaration of conformity for your Blackstar product at this address: https://www.blackstaramps.com/declaration-of-conformity.
• What are the safety instructions?
  • Read the safety instructions carefully and save them for future reference. Follow all warnings and instructions marked on the product. Avoid high internal operating voltages. Clean only with a dry cloth. Allow the unit to reach room temperature before switching it on. Do not push objects into ventilation slots or expose the product to rain, liquids, or moisture. Do not place the product on an unstable surface or cover/block ventilation slots or openings.
• What are the permissible noise level exposures?
  • According to OSHA, any exposure in excess of the permissible limits could result in some hearing loss. The sound level dBA, slow response values are as follows:

Congratulations on buying this Blackstar ID: Core amplifier

Your ID: CORE is a cutting-edge programmable amplifier with a simple yet powerful control set, which delivers incredible tone in Super Wide Stereo. Enhanced voices and effects make its lightweight, compact design perfect for practice, whether you’re an experienced guitarist or just starting out.

GETTING STARTED

1. Connect the power supply to the amplifier.

2. Plug your guitar into the Input socket.

3. Switch your amplifier on using the Power Switch.

MANUAL MODE:

Press this switch to select Manual Mode. In this mode ‘what you see is what you get’ – the sound you hear will reflect the current position of the knobs.

ARCHITECT

Deep editing and storing of patches is simple using the free Architect software. Patches can be shared, uploaded and downloaded via our online community.

• www.blackstaramps.com

SETTING UP

NOTE – Holding the REV switch for two seconds will engage the tuner mode

CHOOSE YOUR SOUND

Choose a preamp voicing ranging from clean to scream and set your gain and volume. Blend your EQ between a UK and American sound, using Blackstar’s patented IF control.

APPLY EFFECTS

DEFAULT PATCHES

To engage PATCH MODE, press the MANUAL button so that the MANUAL LED is unlit .

CONNECTIVITY

• Use a TRRS 3.5mm cable for easy input/output Live Streaming capability.
• CabRig™ is a next-generation advanced speaker simulator that reproduces the sound and feel of guitar speaker cabs in incredible detail.

ACCESSORIES

FS-18

Multi-function foot controller

Connect a Blackstar FS-18 foot controller (sold separately) to control your amplifier. (ID: CORE 20/40 only) FS-11 Footcontroller is also compatible.

PB-1

PowerBank

The PowerBank PB-1
can power an instrument-
based product (i.e.

• ID: CORE, ID: CORE BEAM,
• ACOUSTIC: CORE or FLY

CHARGE for approximately 4-7 hours at medium volume, or an audio-based product (i.e. Super FLY Active Cabinet) for approximately 12-16 hours at medium volume.

NOTE: Your ID: CORE Series amplifier may differ from those shown above.

AUDIO DRIVER & EXTRA FEATURES

WINDOWS – The Blackstar Amplification USB Audio Driver is required to work on Windows. Please download the driver by scanning the following QR code:
MAC – No installation of Audio Drivers is required. Connect your amp directly to your Mac to use as a plug-and-play audio interface. By scanning this QR code you can also find more information about additional features such as using the built-in tuner, editing and storing via the USB within the full ID: CORE online owner’s manual.

Warning

Important safety information

READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL INSTRUCTIONS FOR FUTURE REFERENCE!

Follow all warnings and instructions marked on the product!

Danger! High internal operating voltages.

Do not open the equipment case. There are no user serviceable parts in this equipment. Refer all servicing to qualified service personnel. Clean only with a dry cloth. Condensation can form on the inside of an amplifier if it is moved from a cold environment to a warmer location. Before switching the unit on, it is recommended that the unit be allowed to reach room temperature. Unauthorised modification of this equipment is expressly forbidden by Blackstar Amplification Ltd. Never push objects of any kind into ventilation slots on the equipment casing. Do not expose this apparatus to rain, liquids or moisture of any type. Do not place this product on an unstable trolley, stand or table. The product may fall, causing serious damage to the product or to persons! Do not cover or block ventilation slots or openings. This product should not be placed near a source of heat such as a stove, radiator, or another heat producing amplifier. Use only the supplied power cord which is compatible with the mains voltage supply in your area. Power supply cords should always be handled carefully and should be replaced if damaged in any way. Never break off the earth (ground) pin on the power supply cord. The power supply cord should be unplugged when the unit is to be unused for long periods of time. Before the unit is switched on, the loudspeaker should be connected as described in the handbook using the lead recommended by the manufacturer. Always replace damaged fuses with the correct rating and type. Never disconnect the protective mains earth connection. High loudspeaker levels can cause permanent hearing damage. You should therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear hearing protection if continuously exposed to high levels. This product may be susceptible to electromagnetic interference. If this occurs take steps to limit interference. If the product does not operate normally when the operating instructions are followed, then refer the product to a qualified service engineer. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures:

Duration Per Day In Hours/Sound Level dBA, Slow Response

• 8        90
• 6         92
• 4         95
• 3         97
• 2        100
• 1½    102
• 1         105
• ½      110
• ¼ or less 115

According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plug protectors in the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable or reel che he soune eressure eves such as his amellcaten system be roleded ev hearne ellecters walll of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
    the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

“TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE”. “WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS”.

• This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.
• This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>