BESTINNKITS BWD-55A Smart Coffee Warmer Instruction Manual
- June 17, 2024
- BESTINNKITS
Table of Contents
BESTINNKITS BWD-55A Smart Coffee Warmer
INSTRUCTION
Features
Constant temperature for drinking liquid (no water burning function)Warm milk, warm tea, warm coffee, warm water, dried fruit, heat preservation, etc.
- Liquid Heating:
- Liquid Insulation:
- Liquid thermostat:
Applicability
- Flat bottom cups made of glass, ceramic, stainless steel, etc. [Characteristics: Single-layer flat-bottomed vessel/ The larger the bottom area of the contacted container, the faster the heating rate]
No Applicability
- Insulation cups and double-layer insulation cups will not be able to keep heat, and ceramic cups with grooves have poor insulation effects. You can cover the cup with a lid, and it can also be heated to a suitable temperature. [Features: The lower dent/dent is greater than 3 mm. The larger the dent, the slower the heat transfer. ]
Recommended maximum working time: 16 hours
DIMENSIONS
Parameter
- Product Name: Thermostat coaster
- Konstante: Around 140°F
- Ambient Temperature: 32°F – 104°F
- Product Colors: White, Black, Pink, Red, and Other.
- Product Model: BWD-600 700 800 900 18A 19A 55A
- Rated Voltage: 110V / 220V
- Rated frequency: 50Hz
STRUCTURE
- Microgravity sensor switch
- Put on the cup, indicator light on/ Start Working
- Cup removal,1nd1cator light off/ automatic power off
- Touch control switch
- Touch the switch, indicator lights start working
- Touch the switch again, turn off lights stop working
Different indicators
(The indicator light is shown in blue here)
CAUTION
- When the coffee mug warmer is working, Please don’t touch the surface of the coaster;
- Please do not put coasters in dishwashers, microwave ovens, refrigerator freezer rooms, and other high-temperature, high-humidity, and cold places for storage and cleaning to prevent product damage. When you don’t need to use it, please store it in a cool and dry place.
- The product surface is waterproof, please do not immerse it in water to prevent leakage and other damage.
- Wipe with a damp cloth during cleaning to clean up, without using a hard brush, to prevent damage to the beautiful surface.
- When there is no liquid in the cup or is not used:
- The pressure sensor switch version directly takes off the cup (the dis play lamp is turned off synchronously) to prevent the residual liquid in the cup from drying out, giving off odor, and damaging the product.
- For the touch switch version, please touch the sensor switch to turn off the product. (The indicator lights are turned off synchronously) To prevent residual liquid in the beaker emits an odor and damaging the product.
- Do not place the product on the surface of the software, such as sponge, bedding, blankets, etc., this situation is likely to cause poor switching, poor heat dissipation, damage to the product, or even danger.
- Do not use the product above the marked voltage, which may cause damage to the product. If you don’t use it, don’t forget to turn it off.
- This product complies with FCC CE and other standards. New products often produce a slight plastic odor when used, which is normal. After using the product several times, the odor will automatically disappear.
- Keep out of reach from children.
WARRANTY
- The product is free of charge under normal use within one year from the date of purchase.
- If it is necessary to replace the parts within the time limit specified in the above paragraph, the maintenance fee shall be charged as appropriate.
- During the warranty period, repairs are not free of charge if:
- Maintenance beyond the warranty period.
- Damage caused by disassembly or modification.
- Failure due to a fall or a collision.
- Damage caused by mistakes/negligence or improper use
- Failure or damage caused by non-general household use(such as long-tenure in harsh environments).
Products with touch buttons will automatically shut down after 8 hours of continuous work. If you need to continue to enable them, please touch the switch button again.
TROUBLESHOOTING
- Power Connection : Ensure the power cord is securely plugged into an operational outlet.
- Indicator Light : Verify the functionality of the indicator light; its failure may indicate a power issue.
- Temperature Control : Check the temperature settings to ensure they are correctly adjusted.
- Mug Weight : Confirm the mug’s weight meets the minimum requirement to activate the gravity induction switch.
- Flat-Bottomed Mug : Ensure the mug being used has a flat bottom for optimal performance.
- Surface Cleanliness : Clean any debris or spills from the warmer’s surface that might impede its function.
- Power Supply : Inspect the power supply and outlet for any issues.
- Obstructions : Remove any obstacles around the warmer that may be hindering its operation.
- Reset : Attempt to reset the warmer by unplugging it for a few minutes before plugging it back in.
- Compatibility : Ensure the mug used is compatible with the warmer.
- Overheating : Check if the warmer is overheating and allow it to cool down if necessary.
- Safety Features : Verify all safety features are functioning correctly to prevent potential hazards.
- Customer Support : Seek assistance from customer support if problems persist.
- Environmental Conditions : Ensure the warmer is used in suitable environmental conditions, avoiding extreme temperatures or humidity.
- Surface Damage : Inspect the warmer’s surface for any damage that might affect its performance.
- Electrical Issues : Check for any electrical issues that could impact the warmer’s operation.
- Timer Setting : Confirm the timer setting, if applicable, is set correctly.
- Safety Concerns : Address any safety concerns promptly to prevent accidents or damage.
- Replacement Parts : Consider replacing any worn or damaged components as needed to restore the warmer’s functionality.
FREQUENTLY ASKED QUESTIONS
What brand manufactures the BWD-55A Smart Coffee Warmer?
The BWD-55A Smart Coffee Warmer is manufactured by BESTINNKITS.
What material is used in the construction of the BESTINNKITS BWD-55A Smart Coffee Warmer?
The BWD-55A Smart Coffee Warmer is made of plastic.
What is the power source of the BESTINNKITS BWD-55A Smart Coffee Warmer?
The BWD-55A Smart Coffee Warmer operates on corded electric power.
What are the product dimensions of the BESTINNKITS BWD-55A Smart Coffee Warmer?
The product dimensions of the BWD-55A Smart Coffee Warmer are 0.01 x 4.5 x 5.12 inches.
How much does the BESTINNKITS BWD-55A Smart Coffee Warmer weigh?
The BWD-55A Smart Coffee Warmer weighs 9.6 ounces.
What is the item model number of the BESTINNKITS BWD-55A Smart Coffee Warmer?
The item model number of the BWD-55A Smart Coffee Warmer is BWD-55A.
What beverages can be warmed using the BESTINNKITS BWD-55A Smart Coffee Warmer?
The BWD-55A Smart Coffee Warmer can be used to warm coffee, tea, milk, hot cocoa, or candle wax.
What is the temperature at which the BESTINNKITS BWD-55A Smart Coffee Warmer keeps beverages warm?
The BWD-55A Smart Coffee Warmer keeps beverages warm at a temperature of 131°F (55°C).
What type of mug is suitable for use with the BESTINNKITS BWD-55A Smart Coffee Warmer?
A thin-walled, flat-bottomed mug weighing over 0.8lbs (13oz) is suitable for use with the BWD-55A Smart Coffee Warmer.
What special feature does the BESTINNKITS BWD-55A Smart Coffee Warmer have for safety and convenience?
The BWD-55A Smart Coffee Warmer features a built-in gravity induction switch with an indicator light, eliminating the need for manual on/off operation.
How is the heating plate of the BESTINNKITS BWD-55A Smart Coffee Warmer designed to handle occasional spills?
The heating plate of the BWD-55A Smart Coffee Warmer is covered with a layer of thermal conductive glass, providing a waterproof design that is easy to clean and safe to use.
What warranty is provided with the BESTINNKITS BWD-55A Smart Coffee Warmer?
The BWD-55A Smart Coffee Warmer is backed by a 24-months friendly customer support warranty.
How does the indicator light function in the BESTINNKITS BWD-55A Smart Coffee Warmer?
The indicator light on the BWD-55A Smart Coffee Warmer helps users easily see when the warmer is in operation.
What makes the BESTINNKITS BWD-55A Smart Coffee Warmer a reliable choice for keeping beverages warm?
The BWD-55A Smart Coffee Warmer's waterproof design and gravity induction switch ensure safety and reliability in keeping beverages at a desirable temperature.
How does the BESTINNKITS BWD-55A Smart Coffee Warmer handle spills?
The BWD-55A Smart Coffee Warmer's waterproof design, with its thermal conductive glass cover, allows for easy cleaning and worry-free use even in case of occasional spills.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:BESTINNKITS BWD-55A Smart Coffee Warmer Instruction Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>