anko 43161973 Bluetooth Body Analysis Scale Instruction Manual

Table of Contents

anko-43161973-Bluetooth-Body-Analysis-Scale-PRODUCT

DEAR CUSTOMER

Thank you for purchasing our smart body fat scales. Please read and keep the instruction manual for future reference.

People with the following conditions should not use this device:
Pregnant Women
Those with symptoms of edema
Those on dialysis treatment
Those who use heart pacemakers or other implantable devices
Keep area free of water to reduce slip hazards.
Children under 10, adults over 70 and body building athletes may show deviation therefore the scale should only be used in weighing mode.
The fat percentage and hydration content evaluation by the Smart Body Fat scale is only for reference and not for medical purposes. If the readings are higher or lower than normal and you are worried, consult your doctor for more advice.

Scales are to be used on a solid, flat surface.
The scales are designed to allow auto step on, ignore the first reading. Correct readings are from 2nd weighing.
Weighing should be done in bare feet.
Step on the weighing platform gently, do not kick or drop the scales.
For consistency, weigh at the same time each day.
Keep away from strong electromagnetic fields.
Measuring after intensive exercise, excessive dieting and when dehydrated can give incorect readings
If scales fail to start, check battery and replace if required.

Bluetooth wireless technology
Connect with different smart devices.
Auto on function
Low battery and overload indicator
High precision readings
Records body weight, fat, hydration, muscle and bone percentages and suggests calorie intake.

Note: Remove batteries when not using for extended periods of time.

Remove shoes and socks before weighing and ensure that feet are in contact with electrodes on scale.

Open App and ensure that Bluetooth is on, step on the scale.
Weight is shown on both scale and app. After several seconds, the app will show body fat, hydration, bone and kcal.
Data will be saved.

NORMAL WEIGHING MODE

Install batteries and place scale on a hard, flat floor. Do not use on carpet or mats.
Step on scale to turn on, weight reading will appear on display and will flash after weight has stabilized.

anko-43161973-Bluetooth-Body-Analysis-Scale-FIG-3

Install battery and place the scale on flat floor. To make sure accuracy place the scale on a hard, flat floor and avoid carpet and soft surface.
Step on scale slightly (Auto-on) for a while, wait for weight reading display(as shown above)
Reading result will flash after weight stabilized.

WEIGHT UNIT

AUTOMATIC SWITCH OFF

anko-43161973-Bluetooth-Body-Analysis-Scale-FIG-8

Get the application
- Scan the QR code on the right side to obtain the App.
- At the “App Store” or “Google Play’, search keyword “BodyMonitor ” to download our application.
Bluetooth settings
- Make sure that the Bluetooth is turned on before use
- If not enabled, please go to the “Seting< Bluetooth” menu to turn it on.
- Press the scale platform to turn on.
Create a new user
- Click the “BodyMonitor” icon, you will enter the “user settings”.
- Complete the information to enter the weighing interface.
How To Use The Scale With Application
- Press scale to turn it on b. Open App and make sure the on main interface is blue, which means scales connect the App.
- Connect to the smartphone to transfer user’s information to scale.
- Step on the scale.
- Weight will be showed on the scale and App. After several seconds, body fat, hydration, muscles, bone percentage, and kcal suggestion will be showed following upon weight measurement.
- You can review the history, add new users and set reminders for your weighing habit.

The software doesn’t obtain reading from the scale

Check the connection with app
Check Bluetooth is switched on. Switch on and off, bridge the Bluetooth connection between scale and smartphone again
Check battery status
Relaunch application

Failure to connect to the device