OKP M210 Robot Vacuum Cleaner User Guide

M210 Robot Vacuum Cleaner
Quick Start Guide

Assemble and charge

1. Remove the protective film on the robot and docking station
2. Install the side brushes
3. Placement of the charging base / connection of power supply

• Place the docking station on an open place.

• Connect the power supply and tidy up the power cord to avoid twining. 4. Turn on the robot
  Reminder: Cannot charge when product is turned off.
  “ I ”means ON , “ O ”means OFF

  5. Charging
     Place the robot at Docking Station and make sure to align the charging electrodes
     twinkling means charging.
     turn off means fully charged.
     A full charge takes 5 hours.

Using environment preparation

Tidy up the room Organize the items on the floor, such as wires, slippers and other sundries to avoid affecting the operation of the robot If the rug at home has fringed edges, please put the edges under the rug in advance. Do not let the robot operate on wet floors. The robot can climb to the top of objects with a height of less than 12mm.
If you don’t want the robot to climb on them, please take them away.

How to use buttons

Single press: Start/pause
Double press: Automatic return and charge
Keep pressing for 6 seconds:
Entering Wi-Fi pairing mode

Indicator Meaning

App download and configuration

Downloading and installation of the “OKP” app
Method I : Scan the following QR code, and then download and install App as prompted.

https://mobile.okplife.com/#/pages/index/index

Method II : Search “OKP” in the App store, download and install the OKP app. Note: The robot works with 2.4GHz Wi-Fi networks only. Tips:

• Follow the guidance in the OKP app to register, login, and pair the robot.
• Please make sure that the mobile phone is connected to your Wi-Fi network before paring the robot vacuum cleaner.

Maintenance

• When cleaning and maintaining the robot and its accessories, please unplug the charging stand.
  Warning
  The HEPA Filter should not touch the water.

  1. Open the faceplate and take out the dust bin
  2. Open the dust bin latch and dump the garbag
  3. Remove the filter assembly
  4. Clean the Pre-filter
  5. Clean the HEPA-filter

• When cleaning and maintaining the robot and its accessories, please unplug the charging stand.

6. Clean the Anti-collision sensors to ensure sensitive obstacle avoidance
7. Clean the side brush to prevent hair from tangling
8. Clean the charging electrode of the docking station to ensure successful charging

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>