ARLOAITC SL-101 Solar Street Lights Outdoor User Manual
- June 16, 2024
- ARLOAITC
Table of Contents
ARLOAITC
ALL IN ONE SOLAR LIGHT
USER MANUAL
Innovation for you
FOR FIRST-TIME USE: The solar light needs to charge in full sunlight for 6-8 hours.
1.FEATURES :
- Upgraded Version Solar Street Flood Light With Motion Sensor & Dusk To Dawn &Timing.
- Solar-Powered Lights Are Energy-Saving, And Money-Saving. There Is No Need To Pay Electricity Bills Anymore.
- 3 Lighting Options: Dusk To Dawn Mode, Motion Detection Mode, Light Sensor +Motion Sensor +Timing Mode.
- Large-Capacity Batteries, Provide A Longer Lifespan.
- Recommended Installation Height: 9.84-19.68ft.
- The Solar Light Should Be Installed In Places Where Sufficient Sunshine Is Available.
2.PRODUCT DETAILS :
- Product Dimensions: 17.4413.622.36 inches
- Solar Panel Dimensions: 12.99*15.67 inches
- Waterproof Degree: IP67
- Operating Temperature: -17.6°F-109.4°F
3.PACKING LIST :
Packing List (1 Pack)
Solar Lamp 1 pcs
Remote Control 1 pcs
Batteries 1 set
Pole 1 pcs
Wall Insert Bolts 4 pcs
Long Bolts 1 pcs
Instruction Manual * 1 pcs
Packing List (2 Pack)
Solar Lamp 2 pcs
Remote Control 2 pcs
Batteries 2 set
Pole 2 pcs
Wall Insert Bolts 8 pcs
Long Bolts 2 pcs
Instruction Manual * 2 pcs
Before installing the solar lamp, please check the package contents to ensure all parts are free of visible damage.
4.EASY TO INSTALL :
WALL MOUNTING POLE MOUNTING
Install Steps:
1. Marking the location
Mark The Hole Location Where You Want To Mount.
Drill 4 Holes As Per The Location
Knock The Wall Insert Bolts Into The Wall
Lossen The Screws Nuts.
2. Mounting the bracket
Fix The Bracket On The Wall With Screws Nuts
Adjust The Angle Of The Lamp And Fix It On
- The short bolts are wall insert bolts.
- If you install the light on a pole, please use the long bolts and black plate to fix it.
5.LIGHT SENSOR MODE :
Dusk To Dawn, Charging In The Day
The Day Automatically Lighting At Night
6.HOW IS THE MOTION SENSOR WORK ?
It lights at 100% brightness when motion is detected.
It will back to 30% brightness after 20 seconds when no motion is detected.
Radar induction
The radar sensor triggers when motions or human activities start.
Height (9.84f t-19.68 t )
Dim(30% Brightness)
Bright(10096 Brightness)
Dim (30% Brightness)
7.RADAR SENSOR REMOTE CONTROL MANUAL :
1.FEATURES OF THE REMOTE CONTROL
Remote Control Method: Send an infrared signal through a silica gel button.
2.REMOTE CONTROL FUNCTION INTRODUCTION
a. “ON”:| Always bright key (motion sensor mode inactive), not bright during
the day, enter automatic power reduction mode at night, with 75% brightness
for 1H, 50% brightness for 3H, and 25% brightness until dawn.
---|---
b. “OFF”:| Forced shutdown button, no matter whether it is day or night, press
it to turn off the light forcibly.
c.” “:| Radar sensor button, press this button, not bright during the day,
enter motion sensing mode at night.
People comes to 100% full brightness, people leaves and enter the dim light
mode.
d.”2H”:| Turn on automatically at night and off during the day.
Timing setting 2 hrs under light sensing mode, then enter motion sensing mode.
e.”3H”:| Turn on automatically at night and off during the day.
Timing setting 3 hrs under light sensing mode, then enter motion sensing mode.
f.”5H”:| Turn on automatically at night and off during the day.
Timing setting 5 hrs under light sensing mode, then enter motion sensing mode.
g.”6H”:| Turn on automatically at night and off during the day.
Timing setting 6 hrs under light sensing mode, then enter motion sensing mode.
h.”8H”:| Turn on automatically at night and off during the day.
Timing setting 8 hrs under light sensing mode, then enter motion sensing mode.
i. “25%/50%/75%/100%”:| Dimming button, lights with 25%, 50%, 75% or 100%
brightness.
- Lights ON
- Lights OFF
- 50% Brightness
- 25% Brightness
- 100% Brightness
- 75% Brightness
- Light Sensing Mode for 2 Hrs,Then Enters Motion Sensing Mode
- Motion Sensing Mode
- Light Sensing Mode for 3 Hrs, Then Enters Motion Sensing Mode
- Light Sensing Mode for 6 Hrs, Then Enters Motion Sensing Mode.
- Light Sensing Mode for 8 Hrs, Then Enters Motion Sensing Mode.
- Light Sensing Mode for 5 Hrs, Then Enters Motion Sensing Mode
After-service Email: ARLOAITC_service@outlook.com. For any questions about the product, please don’t hesitate to contact us, we will reply and solve your problems within 24 hours, providing 100% satisfactory after-sales service! Thank you for your choice and support.