QFX PBX-804SM Portable Speaker User Manual
- June 4, 2024
- QFX
Table of Contents
QFX PBX-804SM Portable Speaker
WARNING
- TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
- To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this product near any liquids, heat sources such as radiators, or heat registers. Clean only with a dry cloth. Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions as they are stated.
PBX-804SM BATTERY
The PBX-804SM is a lithium battery-powered PA loudspeaker. Be sure that you have completely charged the battery prior to first use to maximize the battery’s lifespan. Once the power adaptor is connected to a power source, it will automatically begin charging (5~6 hours to fully charge the lithium battery ) Even if the battery power is low, it will power on when connected to a power source. When the battery power is charging, the battery indicator light is red. When the battery charge fully, the indicator light will turn off. Upon completion of the charging, Please disconnect the unit. With standard usage, a fully charged battery can play for about 1~2 hour. Battery can be recharged about 300 times in its lifetime. When not in use, the speaker should always be set OFF to prevent the unit from draining the battery. When the unit is not used for prolonged periods of time, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 60 days. When battery is completely empty, the unit cannot perform at 100% of the volume when immediately connected to power source. It is suggested to charge for a while before using with 100% volume, The unit may work and charge with lower level volume. The volume level would be increased as the unit is charging.
PBX-804SM BLUETOOTH
Bluetooth Mode: Open the Bluetooth of phone. Find the Bluetooth name of the unit called”QFX PBX-804SM” to connect. After a successful match, you can play the music from speaker. You won’t need reconnect the Bluetooth when switching mode.
PBX-804SM REAR PANEL
- Master volume Knob : Adjust from Min to Max ( Power Switch: ON/OFF )
- Previous Track Button: Select previous track
- Play/Pause Button(TWS connection)
- Next Track Button: Select next track
- Mode Button :Toggle between AUX, USB, FM,
- BT by Short Press ; Long Press to turn on/ off the light
- USB Slot
- AUX IN
- Microphone Input
- Power Supply: DC 5V
- Battery Indicator
PBX-804SM DISPLAY SYSTEM SETTINGS
- Input Mode: The LED display screen will display the information of input mode for USB/BT/AUX /FM. When a USB flash drive is inserted into the USB input, the unit will automatically switch to USB mode and begin playing Mp3 audio files from the USB flash drive
- Track Number: The track number currently playing from the USB will display.
- FM Mode: All FM channels display here. Short Press “play/pause” button for auto scan all channels.
PBX-804SM REMOTE CONTROL
- STANDBY: Make the unit to be standby mode.
- Input Mode Button: Toggle between USB,FM,AUX,BT
- Mute: Mute the track
- PLAY/PAUSE
- Previous Track: Select previous channel
- Next Track: Select next channel.
- EQ: Select EQ mode.
- VOL-:Reduce the master volume
- VOL+: Increase the master volume
- REP: Repeat the playing track.
- Press to Scan Channel in FM Mode
- 12-21.KEY Number for selecting the certain track for USB flash drive.
PBX-804SM TWS CONNECTION
- TWS connection: TWS Connection is only for two speakers, can not support quantity over 2 PCS.
- Turn on the Speakers , press the MODE button to switch to BLUETOOTH mode, and the word “BLUE” on the LED screen will flash.
- At the first time, please press the Play/Pause (TWS) button of one unit for 3 seconds. Then two speakers will connect together.
- Connect the phone: Open the phone Bluetooth settings, Search and Connect the main device Bluetooth Name ‘QFX PBX-804SM’.
- Select music from phone and enjoy TWS playing in pairs with two Speakers.
- Exit TWS: Long press the Play/Pause (TWS) button for 3 seconds to exit the TWS function
HOW TO USE STAND
Instruction
- Take out the main column from the tripod and assemble them with a sleeve;
- Put nuts inside the cases, and then insert one of the nut cases into the sleeve slot; then fastened by a screw;
- Insert another nut case into the tripod slot, and fastened by the screw as well;
- Insert the lock pin in the hole of the main column to control the height.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>