QFX PBX-136 Portable Speakers User Manual
- June 3, 2024
- QFX
Table of Contents
QFX PBX-136 Portable Speakers
Features
Bluetooth
True Wireless Stereo
FM Radio
USB/TF Card Inputs
Aux Input
Microphone Input
Karaoke Function
Rechargeable Lithium battery
Specification
Output power: !OW
Driver unit size: 6.5 inch
Impedance: 3 Ohm
S/N ratio: ~80dB
Separation: ~45dB
Distortion: :51.0%
Frequency response: 100Hz-20KHz
Bluetooth version: V4.2+EDR
Bluetooth range: 10 meters
Bluetooth pairing name PBX-136
Bluetooth profiles supported: A2DP
USB & TF max. memory supported:32 GB
FM radio: 87.5-108.0MHz
Battery capacity: Built-in 2400mAh
Battery type: Lithium-Ion
Playback time: 80MINS at maximum volume
Charging indicator: Yes
Charge voltage : DC SV
Accessory
USB Charging Cable
Aux Cable 3.5mm
User Manual
Connect to Bluetooth device
Bluetooth Pairing
Begin by turning ON the unit. The ON/OFF switch is located on the back panel. Use the mode button “M” to enable Bluetooth. On your mobile device search for “QFX BT-136” under the Bluetooth settings menu and connect. Your mobile device should now be paired with the “BT-136” and ready for music playback.
True Wireless Stereo
If you have 2 “QFX BT-136” units with the TWS function, turn on both units,
and press and hold the MODE button on either unit for a few seconds. The units
will connect automatically.
Note: True Wireless Stereo (TWS) function only work in Bluetooth mode.
- ON/OFF/: Turn ON/OFF the unit.
- Microphone Input: 6.35mm jack.
- AUX: 3.5mm jack.
- USB Input: Insert USB device.
- TF Input: Insert TF Card
- M: Toggle through BT, AUX, USB, TF, FM Radio. Also the TWS button.
- : Play and Pause current track. In FM mode, press and hold for auto scan.
- : Press and hold to decrease the volume. Press for previous track or FM radio station.
- : Press and hold to increase the volume. Press for next track or FM radio station.
- Press to increase the bass.
- Press to change the LED Light mode
- DC-SV: USB – DC-SV, lA min
Bluetooth
Begin by turning ON the unit. The ON/OFF switch is located on the back
panel. Use the mode button “M” to enable Bluetooth. On your mobile device
search for “QFX BT-136” under the Bluetooth settings menu and connect. Your
mobile device should now be paired with the “BT-136” and ready for music
playback. Press to Play/Pause, press return to the previous track and to go to
the next track.
AUX-IN
Press the MODE Button to enable Aux mode. plug the audio 3.5mm Aux cable to
the jack, Press and hold the and buttons to decrease and increase the volume.
USB/TF Card
Insert the USB or TF card into the USB/TF port to playback .mp3 music files
from the device. Press to Play/Pause, press return to the previous track and
to go to the next track.
FM RADIO
Press the MODE button to enable the FM Radio mode. Press the Button to search
FM channels automatically. This operation will scan all FM stations and Pre-
record them to the memory. The scan procedure will take several minutes to
complete and should not be interrupted. Once complete, you can short press or
to move forward or backward. Press and hold the and buttons to decrease and
increase the volume
Charging
Plug the Micro USB cable into charging port and connect to a power source (SV,
lA min). The charging LED light indicator should light up red when the unit is
charging.