Comfort Zone CZ6C Clip Fan 6 inch Quiet Portable Owner’s Manual
- June 17, 2024
- Comfort Zone
Table of Contents
Comfort Zone CZ6C Clip Fan 6 inch Quiet Portable
Product Information
Specifications
- Model: CZ6C
- Intended Use: Indoor residential and office use only
- Not suitable for industrial or commercial applications
- Power Source: Electric
- Plug Type: Polarized two-prong plug
- Power Cord: Minimum 14 AWG, rated not less than 1875 watts
Product Usage Instructions
Safety Precautions:
- Read and save the instructions provided in this manual.
- Ensure the electrical wiring used is in good working order and meets applicable codes and ordinances. If unsure, consult a qualified electrician.
- Use the fan only in dry environments. Do not use in bathrooms, laundry areas, or other locations where water is present.
- Avoid using the fan in damp environments such as flooded basements.
- Keep the fan away from combustible materials, flammable gases, and sources of heat.
- Ensure proper ventilation and do not block air intakes or exhaust openings.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening.
- Use the fan with an adequate electrical system that is up to code. Do not use with a damaged cord or plug.
- Ensure the polarized two-prong plug is fully inserted into a properly grounded outlet. If the plug does not fit, reverse it or contact a qualified electrician. Do not attempt to defeat this safety feature.
- Do not use the fan with any solid-state speed control device.
- Avoid running the power cord under carpeting or covering it with throw rugs or similar items.
- Arrange the cord away from traffic areas to prevent tripping hazards.
- Avoid the use of extension cords. If necessary, use a minimum 14 AWG extension cord rated not less than 1875 watts, and ensure the plug can be completely inserted into its receptacle.
- Unplug the fan when not in use and do not operate it with ventilation obstructed.
Fan Operation:
- Always operate the fan in the upright position.
- Follow all instructions and recommendations provided in this manual.
Frequently Asked Questions (FAQ):
-
Q: Can I use this fan in a bathroom?
A: No, this fan is not intended for use in a bathroom or any other location where water is present. -
Q: Can I use this fan in a flooded basement?
A: No, avoid using the fan in damp environments such as flooded basements. -
Q: Can I touch the fan motor when it is in use?
A: No, the motor gets hot during use. To avoid burns, do not touch the motor while it is in operation. -
Q: Can I use this fan with an extension cord?
A: It is recommended to avoid using extension cords. However, if necessary, use a minimum 14 AWG extension cord rated not less than 1875 watts and ensure the plug can be completely inserted into its receptacle. -
Q: Can I use this fan with a solid-state speed control device?
A: No, do not use this fan with any solid-state speed control device.
Features
- Sliding ON/OFF Switch with 2 Speed Settings
- High Performance 6″ Blade
- Large Strong Clip
- Adjustable Tilt and Swivel
- Steel Safety Grill
- 120V A.C. / 60Hz.
Intended Use
This product is intended for indoor residential and office use only, not for industrial or other commercial applications. Use only electrical wiring that is in good working order and that meets applicable codes and ordinances. If you have any questions about whether your wiring is adequate, consult a qualified electrician. While using your fan, you should follow the IMPORTANT INSTRUCTIONS listed below. As part of those instructions, we have used the word “WARNING” to indicate the level of hazard: WARNING indicates a hazard which, if not avoided, could result in injury or death.
IMPORTANT INSTRUCTIONS
As with all electrical appliances, basic safety precautions should always be followed to reduce the risk of electric shock, fire, or injury to persons, including the following precautions:
- Read all the instructions before using this fan.
- Use this fan only as described in this manual. Any other use not recommended by the manufacturer may cause electrical shock, fire or injury to persons.
- Do not operate the fan with a damaged power cord or after the fan malfunctions or has been dropped in any manner.
- Use of extreme caution is necessary when any fan is used by or near children, disabled persons or pets and whenever the fan is left operating unattended.
- Do not place the fan on a small, unlevel, uneven or any surface that might allow the fan to tip or fall.
- For proper operation, the fan should be placed on a smooth, non‑combustible, level surface.
- Always unplug the fan when not in use, when moving from place to place, when assembling or disassembling parts, and before cleaning.
- The use of attachments, not recommended or sold by the manufacturer, may cause hazards.
- Do not use outdoors.
- Do not use a fan in the window. Rain may cause electrical hazards (for non‑window models).
- Do not operate the fan with blade guards or any safety device removed.
- Avoid the use of extension cords due to the risk of fire. If an extension cord must be used, the cord must be a minimum 14 AWG and rated not less than 1875 watts.
- Do not run the power cord under the carpeting. Do not cover the cord with throw rugs, runners or the like. Arrange the cord away from the traffic area where it will not be tripped over.
- Do not insert or allow any object to enter any openings on the fan. Doing so may cause electric shock and/or fire hazards. Avoid contact with moving parts.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure they do not play with the appliance.
READ & SAVE THESE INSTRUCTIONS
WARNING : Shock Hazard
Use your fan only in dry environments. This fan is not intended for use in a
bathroom, laundry area, or similar locations, or near sinks, washing machines,
swimming pools or other sources of water. Never locate fan where it may fall
into a bathtub or other water receptacle. Do not use in damp environments such
as flooded basements.
WARNING : Hot Surfaces
Do not touch fan motor when in use. This motor is hot when in use, to avoid
burns, do not let bare skin touch hot surfaces.
WARNING : Fire Hazard
Fans have arcing or sparking parts inside. Do not use near combustible
materials or flammable gases or sources of heat. DO NOT USE in areas where
gasoline, paint or flammable materials are used or stored. To prevent a
possible fire, do not block air intakes or exhaust in any manner. Do not
insert or allow foreign objects to enter any ventilation or exhaust opening as
this may cause an electric shock, fire, or damage the fan.
WARNING : Electrical Shock Hazard
Do not use a damaged cord or plug. Use with adequate electrical system that is
up to code.
CAUTION : to Prevent Electric Shock, this product has a polarized two-
prong plug (one blade is wider than the other) that must be fully inserted
into a matching properly grounded outlet. This plug is designed to fit a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If the plug still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
WARNING : To reduce the Risk of Fire or Electric Shock, do not use this product with any solid‑state speed control device.
- DO NOT operate any fan with a damaged cord or plug or after fan malfunctions, has been dropped or damaged in any manner. Do not operate fan with a broken blade, safety cage or any visual imperfections. Disconnect power before servicing.
- For repairs covered under warranty, see warranty statement. For all other repairs contact Comfort Zone® Customer Service by telephone or mail for information and assistance.
- DO NOT run the power cord under the carpeting. DO NOT cover the cord with throw rugs, runners or the like. Arrange the cord away from the traffic area where it will not be tripped over. Avoid the use of extension cords due to risk of fire. If an extension cord must be used, the cord must be a minimum of 14 AWG and rated not less than 1875 watts. Do not use an extension cord unless the plug can be completely inserted into its receptacle. Unplug the fan when not in use. Do not operate the fan with its ventilation obstructed.
Usage
-
Fan Operation : Always operate the fan in the upright position following all instructions and recommendations listed in this manual.
-
Fan Location: Place the fan in the area of the room that will provide proper fan cooling.
-
Fan Connection : Plug the fan directly into 120 volts A.C., 60 Hz wall outlet. Be sure the plug fits tightly in the outlet. A loose connection may cause overheating and damage to the plug or fan.
Note : To prevent overloading a circuit, do not plug the fan into a circuit that is servicing other electrical needs. -
Turning Fan On/Off: Clip the fan to a stable location. Plug the fan into the outlet. To start the fan, slide the power switch to the desired speed button: OFF, LOW, HIGH.
-
Fan Assembly: Simple assembly is required to use this fan.
Care and Maintenance
- Cleaning : CAUTION- Before cleaning the fan be sure to disconnect the power cord from the plug. Clean the grille surface with a clean damp cloth. Do not use harsh chemicals or abrasive cleaners. DO NOT IMMERSE THE FAN OR ANY WIRES IN WATER. Replace the front grille before fan use. Allow the fan to dry completely before use. Periodic grille cleaning with a vacuum will prevent dust buildup. The motor is sealed and does not require any interior maintenance, cleaning or lubrication.
- Maintenance : The Internal motor bearings are permanently lubricated at the factory and do not require any additional lubrication.
- Repair : DO NOT OPERATE THE FAN WITHOUT THE GRILLE IN PLACE. DO NOT USE THE FAN IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY.
- Storage : Keep the original carton for storage of the fan. Coil and tie the power cord to avoid damage during storage.
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
Fuse Replacement:
- Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on cord.
- Open the fuse cover by sliding open the fuse access cover on top of the attachment plug towards the blades. See Fig. 2.
- Remove fuse carefully. Use a small tool to pry the end of the fuse from the holder cavity. Be careful not to break glass windows.
- Replace fuse. WARNING: Risk of fire. Replace fuse only with identical 2.5 or 5.0 Amp, 125 Volt fuse (3.6mm x 10mm). Be sure the fuse is properly seated within its cavity.
- Close the fuse cover by sliding it back to its original closed position.
Limited Warranty
Products manufactured by Comfort Zone® are warranted to the original consumer to be free of defects in material and workmanship for twelve (12) months from the original date of purchase. The warranty does not cover products modified outside our factory, damage or failure caused by acts of God, abuse, misuse, abnormal usage, faulty installation, failure to follow suggested maintenance procedures enclosed with this product (as defined by Magnuson-Moss Warranty- Federal Trade Commission Improvement Act). This unit is guaranteed to the original retail purchaser against defects in quality or workmanship for one year from the date of the original purchase. If this unit fails because of a manufacturing defect within 30 days of purchase, return the unit, with your receipt, to the retailer. After 30 days, but within the warranty period, if the unit was purchased within the continental United States, return it, freight prepaid, to Comfort Zone® for repair or replacement. If the unit was purchased outside the continental United States, return the unit to the place of purchase. This warranty does not cover damage due to accidents, operation on other than 120 volts / 60 hertz A.C. current, or any other abuse. All implied warranties, including the warranties of merchantability and of fitness of purpose, if applicable, are hereby limited in duration to the period of one year from the date of original retail purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Incidental or consequential damages arising from a breach of either express or implied warranties are hereby disclaimed and excluded. Some states do not allow the exclusion of limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. No informal dispute settlement mechanisms are available. This limited warranty is given instead of all other warranties.
Manufactured for:
Howard Berger Co. LLC
324A Half Acre Rd.
Cranbury, NJ 08512 USA
800-221-6895
www.comfortzone-us.com
Rev. 080215
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>