DIGI MIL-S3100 Amily Of Dual Speed Switches User Manual

: June 17, 2024
: DIGI

Table of Contents

DIGI MIL-S3100 Amily Of Dual Speed Switches
Installation Guide
INTRODUCTION
PACKAGE CONTENTS
HOW TO USE THE 4 OR 8-PORT 10/100 DUAL SPEED SWITCH
WALL MOUNT
FCC COMPLIANCE STATEMENT
SAFETY INSTRUTIONS
TECHNICAL INFORMATION
Five-Year Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DIGI MIL-S3100 Amily Of Dual Speed Switches

DIGI-MIL-S310-Amily-Of-Dual-Speed-Switches-PRODUCT

Specifications

Model: MIL-S3120 (4-port) / MIL-S3130 (8-port)
Speed: 10/100 Mbps
Compliance: IEEE802.3, IEEE802.3U
Ports: 4 or 8 10/100 Mbps switching ports
Auto-Negotiation: Supported for each port
Uplink Port: 1 uplink port for cascading
LEDs: Visual diagnostic LEDs
Size: Palm size
Power Adapter: External power adapter

Package Contents

4-port or 8-port 10/100 dual speed switch
AC power adapter
Mounting kit for wall mount
Installation guide

How to Use the 4 or 8-Port 10/100 Dual Speed Switch

LEDs

The LEDs on the front panel indicate the following status:

LED	Status
Power Green	The system detects the power signal.
Power Off	No power.
10 Mbps/Hdx/Act Green	A good connection is established, and the 10 Mbps link

pulse is
detected. The operation mode is negotiated at full duplex.
10 Mbps/Hdx/Act Flashing Green| The port operates in full duplex, indicating that data is being
received or transmitted.
10 Mbps/Hdx/Act Amber| A good connection is established, and the 10 Mbps link pulse is
detected. The operation mode is negotiated at half duplex.
100 Mbps/Hdx/Act Green| A good connection is established, and the 100 Mbps link pulse
is detected. The operation mode is negotiated at full duplex.
100 Mbps/Hdx/Act Flashing Green| The port operates in full duplex, indicating that data is being
received or transmitted.
100 Mbps/Hdx/Act Amber| A good connection is established, and the 100 Mbps link pulse
is detected. The operation mode is negotiated at half duplex.
Off| No link established.

Installation Guide

MIL-S3120 4-port 10/100 Dual Speed Switch
MIL-S3130 8-port 10/100 Dual Speed Switch

INTRODUCTION

Thanks for purchasing one of the MIL-S3100 family of dual speed switches. They provide a dedicated bandwidth of 10/100 Mbps throughput per port to the desktop. With features like auto-negotiation and half/full duplex, these switches offer smooth network migrations and easy upgrades to network capacity.

The MIL-S3100 family of dual speed switches has the following features

Complies with IEEE802.3, IEEE802.3U standard
4 or 8 10/100 Mbps switching ports
Auto-Negotiation is supported for each port.
One up-link port provided for cascading
Visual diagnostic LED’s supported
Palm size
External power adapter

MS1458TV00ADS

PACKAGE CONTENTS

Before you begin, verify that your package contains the following items:

4-port or 8-port 10/100 dual speed switch
AC power adapter
Mounting kit for wall mount
Installation guide

HOW TO USE THE 4 OR 8-PORT 10/100 DUAL SPEED SWITCH

LED’s
The LED’s on the front panel show the following status:

Status of the switch’s power supply
Connection speed of 10 Mbps or 100 Mbps
Data activity on the segment
Full/half duplex operation mode

Power

Power Green The system detects the power signal
OFF No power.
10 Mbps/Hdx/Act Green A good connection is established, and the 10 Mbps link pulse is detected. The operation mode is negotiated at full duplex.
Flashing Green The port operates in full duplex, indicating that data is being **** received or transmitted
Amber. Amber A connection is established, and the 10 Mbps link pulse is detected. The operation mode is negotiated at half duplex.
Flashing Amber The port operates in half duplex, indicating that data is being received or transmitted. Off No link established.
100 Mbps/Hdx/Act Green A good connection is established, and the 100 Mbps link pulse is detected. The operation mode is negotiated at full duplex.
Flashing Green A good connection is established, and the 100 Mbps link pulse is detected. The operation mode is negotiated at full duplex. Flashing Green The port operates in full duplex, indicating that data is being received or transmitted.
Amber A good connection is established, and the 100 Mbps link pulse is detected. The operation mode isnegotiated at half duplex.
Flashing Amber The port operates in half duplex, indicating that data is being received or transmitted
Off No link established.

RJ-45 10/100 Dual Speed Switching Ports
There are 4 or 8 RJ-45 ports on the front panel. The 10/100 Mbps speed and full/half duplex modes of the ports are automatically determined when users connect the switch to 10Base-T and 100Base-TX devices.

Uplink Port
One uplink connector (MDI) on the front panel allows users to connect to a switch or a hub, using straight-through Category 5 twisted pair cable as figure shown.

Connecting to a desktop
The ports are used for connecting the switch to the desktops, to form a small network. You can build the network as the figure shows. To improve the network efficiency, it is better to have 200 Mbps full duplex operation between the server and switch if the LAN adapter on the server can operate in full-duplex mode.

Connecting to a Switch or a Hub
Switch-to-switch or switch-to-hub connections are made by connecting the uplink port of 10/100 Dual speed switch to a port of the other hub/switch.
With 100Base-TX, the maximum network length is approximately 205 meters with UTP cable. The maximum length between hubs or switch-to-hub is 100 meters.

WALL MOUNT

The 4 or 8-port 10/100 Dual speed switch can be mounted to the wall or to the flat surface

Screw one of the enclosed 1/2-inch wood screws into the surface, leaving approximately 1/4-inch of the threads exposed.
Hang the switch on the wall using the keyholes provided on the bottom of the switch.

FCC COMPLIANCE STATEMENT

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the instructions provided with the equipment, may cause interference to radio and TV reception. The equipment has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If you suspect this equipment is causing interference, turn your switch on and off while your radio or TV is showing interference. If the interference disappears when you turn the switch off and reappears when you turn the switch on, something in the switch is causing interference.

You can try to correct the interference by one or more of the following measures

Plug the computer which has the equipment installed into a different power outlet so that the equipment and the receiver are on different branch circuits.
Reorient the receiving radio or TV antenna where this may be done safely.
If necessary, you should consult the place of purchase or an experienced radio/television technician for additional suggestions.

SAFETY INSTRUTIONS

This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
This product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding type plug.
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
If an extension cord is used with this product, make sure that the total ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to servicing to service personnel’s.

TECHNICAL INFORMATION

DIGI-MIL-S310-Amily-Of-Dual-Speed-Switches-

Five-Year Limited Warranty

Digi International warrants to the original consumer or purchaser that each of its products and all components thereof, will be free from defects in material and /or workmanship for a period of five years from the original factory shipment date. Any warranty hereunder is extended to the original consumer or purchaser and is not assignable.
Digi makes no express or implied warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, except as expressly set forth in this warranty. In no event shall Digi be liable for incidental or consequential damages, costs, or expenses arising out of or in connection with the performance of the product delivered hereunder. Digi will in no case cover damages arising out of the product being used in a negligent fashion or manner.

Trademarks
Digi International and the Digi Logo are trademarks of Digi International. All other products and brands are trademarks of their respective holders. All rights reserved.

To Contact Digi
For prompt response when calling for service information, have the following information ready: