GLOBAL INDUSTRIAL 27955 Wood Lockers Instruction Manual

GLOBAL INDUSTRIAL 27955 Wood Lockers

Product Information

Specifications

• Model: XYZ123
• Dimensions: 1828x381x18 mm
• Material: Wood

FAQ

• Q: Can I install the metal base without using any hardware?
  • A: No, the metal base needs to be securely joined to the cabinet base using the provided hardware.
• Q: How should I clean the cabinets?
  • A: To clean or remove stains, use a piece of flannel dampened with a mixture of alcohol and water. Avoid direct sunlight.

Product Usage Instructions

Back-to-back Cabinet Installation

1. Ensure that the area where the cabinets will be installed is plumb and level.
2. Check the ventilation spacing between the back of the cabinets and ensure that the side panels have been properly installed.
3. Align the cabinets to secure them back-to-back. The side panels must fully touch each other.
4. Install the metal plates on top of the cabinets.

Mounting Cabinets to the Wall

1. Ensure that the area where the cabinets will be installed is plumb and level.
2. Check the ventilation spacing between the back of the cabinets and ensure that the side panels have been properly installed.
3. Align the cabinets to secure them to the wall. The side panels must fully touch the wall.
4. Fold the metal plate and install it on top of the cabinets.

Metal Base Installation

(Add-on Sold Separately)

1. Ensure that the area where the cabinets and their bases will be installed is plumb and level.
2. Position the metal base, aligning and centering it on the body of the previously joined cabinets.
3. Use the hardware that comes with the metal base component to join the parts of the metal base to the cabinet base.

Side Panel Installation

(Add-on Sold Separately)

1. Ensure that the area where the cabinets and their bases will be installed is plumb and level.
2. Position the side panels so that they’re aligned with the front of the cabinet body (not the door).
3. The spacing created between the end of the panel and the back of the cabinet is for ventilation.
4. Use the hardware that comes with the side panel to join them through the existing holes inside the cabinet wall.

HARDWARE LIST

The hardware drawings are full-scale so their dimensions are the same as the actual hardware.

Installation Instructions

Side panel installation (add-on sold separately)

1. Make sure that the area where the cabinets and their bases will be installed is plumb and level.
2. Position the side panels so that they’re aligned with the front of the cabinet body (not the door)
   • Check-01. The spacing created between the end of the panel and the back of the cabinet is for ventilation Check-02
3. After they are positioned use the hardware that comes with the side panel to join them through the existing holes inside the cabinet wall as shown below.

Corporate assembly

Join cabinets

1. Start by positioning the cabinets side by side, ensuring they are plumb and level.
2. After they are positioned, use hardware (H) to join them through the existing holes inside the cabinet wall, as shown below.

Metal base installation (add-on sold separately)

1. Make sure that area where the cabinets and their bases will be installed is plumb and level.
2. Position the metal base, aligning and centering it on the body of the previously joined cabinets.
3. After they are positioned, use the hardware that comes with the metal base component to join the parts on to the metal base to the cabinet base, as shown below.

Mounting cabinets to the wall

1. Make sure that the area where the cabinets and their bases will be installed is plumb and level.
2. Check the ventilation spacing between the back of the cabinets and ensure that the side panels have been properly installed. Align the cabinets to secure them to the wall. The side panels must fully touch the wall.
3. Fold the metal plate and install it on top of the cabinets as shown below.

KIT TO AVOID TIPPING

Back-to-back cabinet installation

1. Make sure that the area where the cabinets and their bases will be installed is plumb and level.
2. Check the ventilation spacing between the back of the cabinets and ensure that the side panels have been properly installed. Align the cabinets to secure them back-to-back. The side panels must fully touch each other.
3. Install the metal plates on top of the cabinets as shown below.

Maintenance

Maintenance Tips

• To clean or remove stains, use a piece of flannel dampened with a mixture of alcohol and water.
• Avoid direct sunlight.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>