anko EWL-21132-A Clock Wireless Charger Instruction Manual

CLOCK WIRELESS CHARGER
User Manual
EWL-21132-A
K: 43-367-603 I T: 69-103-391

Device Lay-out

Includes

1. Alarm clock
2. USB-C cable
3. User manual

Technical specifications

Input: 5V/2A, 9V/2A, 1 2V/ 2A
Wireless charging output: 15W/10W/7.5W/5W (Wireless charging at 15W is only applicable to some devices)
Charging efficiency: ≤75%
Charging distance: ≤8MM

LED Color indication

1. Standby: No display lamp.
2. On charging: Blue light stays on.
3. Fully Charged: No display lamp.
4. Mobile not supported: Blue light flashes.
5. Foreign Object Detection: Blue light flashes.

How To Set Time/Alarm

1. Getting Started Plug in the charging cable, time start to display,the wireless charger indicator blue light flashes 1 second.
2. Power on/off function Press the button shortly to turn on/off the time display. Long press the for above 3 seconds,then enter into the default time 06:00.
3. 12/24H Switch Press button shortly to swith the time display mode:12H/24H.
4. Time Setting Press M button shortly to enter into the time setting, long press [ M ] button to exit time setup.After entering into the time setting, the Hour number flashes, press the buttons to increase or decrease the value,or press and hold the buttons to skip though the values quickly. After the Hour setting,press M button to enter into the Minute format, the Minute begins to flash.Press the buttons to increase or decrease the value, or press and hold the buttons to skip though the values quickly.
5. Alarm Setting Press button shortly to enter into the alarm setting. Press M button shortly to swith Hour /Minute setting, long press the M button to exit the alarm setting.Long press button to turn on/off the alarm.
6. Snooze Mode When the alarm rings, take a shot at the wireless charging host or press any button to stop the alarm ringing.No any operation, the alarm will ring 10 minutes (in ringing 30 seconds stop 10 seconds mode) then exit.

6. Notes

1. Do not disassemble or throw into fire or water, to avoid damage.
2. Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
3. Do not place too close with magnetic stripe or chip card (ID card, credit cards, etc.) to avoid magnetic failure.
4. Please keep the distance at least 30cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
5. To take care of the children, to ensure that they won’t play the wireless charger as a toy.
6. Some phone case may affect the charging performance. Ensure there is no any metal object between your phone cases or try to take it off before charging.

The wireless charging efficiency may be affected by some phone cases.
Make sure there is no mental foreign object between the charging pad and phone case when charging.
To achieve fast wireless charging, a Quick Charge 2.0 or higher power adapter will be required(sold separately).
* 12 Month Warranty
Thank you for your purchase.
Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.
For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
We will provide you with your choice of a refund, repair (where possible) or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty.
This warranty will no longer apply where the defect is a result of alteration. accident, misuse, abuse or neglect. Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to the respective Customer Service Centre.
Our goods come with guarantees that cannot be excluded under the Australianl Consumer Law. You are entitled to a replacement or refund for a maior failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a maior failure.
WARNING: BUTTON CELL BATTERIES ARE HAZARDOUS (NEW OR USED). KEEP AWAY FROM CHILDREN. BUTTON CELL BATTERIES CAN CAUSE SEVERE OR FATAL INJURIES IN 2 HOURS OR LESS IF THEY ARE SWALLOWED OR PLACED INSIDE ANY PART OF THE BODY. IF YOU SUSPECT YOUR CHILD HAS SWALLOWED OR INSERTED A BUTTON CELL BATTERY, CALL THE 24HOUR POISONS INFORMATION CENTRE IN AUSTRALIA ON 131126 OR IN NEW ZEALAND 0800 764 766 OR CONTACT YOUR COUNTRY’S EMERGENCY DEPT. USED BATTERIES MUST BE DISPOSED OF IN THE GARBAGE OR A BATTERY RECYCLE FACILITY.
THIS PRODUCT CONTAINS BUTTON CELL BATTERIES SCAN THE GR CODE FOR MORE INFORMATION.

http://productsafety.gov.au/products/electronics-technology/button- batteries

Contact for Kmart purchases
Kmart Australia Ltd.
C/— Customer Service Centre
690 Springvale Road,
Mulgrave Vic 3170
Customer Service: 1800 124 125
(Australia) or 0800 945 995
(New Zealand) or via
Customer Help at kmart.com.au| Contact for Target purchases
Target Australia Pty Ltd
C/— Customer Service Centre
2 Kendall Street, Williams Landing.
Vic,3027
Customer Service: 1300 753 567
or via Customer Help at
target.com.au/help/contact—us
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>