N3M432 Gokart Pro and Ninebot S-Max User Manual

: June 17, 2024
: Ninebot

N3M432 Gokart Pro and Ninebot S-Max

The manufacturer reserves the right to make changes to the product, release ﬁrmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot App to download the latest user materials. You must install the App to follow the New Rider Tutorial activate your product, and obtain the latest updates and safety instructions.

Welcome
Thanks for choosing the Ninebot Gokart Pro. Ninebot Gokart Pro is a stylish sports and entertainment equipment, which can be separated into a Gokart frame and a self-balancing vehicle. You can also assemble the body of the self- balancing vehicle into Ninebot S-Max This manual introduces respectively the Ninebot Gokart Pro (hereinafter referred to as Gokart) and the Ninebot S-Max (hereinafter referred to as S-Max). Enjoy your ride and connect with riders worldwide!

Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. Actual products and functions may vary due to product enhancements.

Packing List

Ninebot Gokart Pro

1 Riding Safety

Gokart is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot (Ninebot (Beijing) Tech Co., Ltd. or its subsidiaries and affiliates) nor Segway Inc. is responsible for injuries or damage caused by a driver’s inexperience or failure to follow the instructions in this User Manual or in the New Rider Tutorial.
Remember as with any mode of transportation, that whenever you drive the Gokart, you risnjury or death from loss of control, collisions, and falls. You can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks.
The Gokart kit contains small parts that can create a choking hazard. Keep small children away from the Gokart.

Pre-Ride Checklist and Preparing for Your Drive:

Before each drive check and tighten any loose parts, fasteners, straps, and replace damaged components.
To avoid accidents caused by improperly inflated or worn tires, check the tire pressure on the Ninebot S-Max tires and wear on all tires before each ride. Do not touch moving or spinning tires.
Ensure that the battery level and vehicle operating status are within the specifications contained in the manual of the model being used with the Gokart.
Carefully read, understand, and follow all instructions in this User Manual and watch and understand the New Rider Tutorial in the App before your first drive. Do not attempt to drive the Go,kart if you are not able to drive under the instructions in this Manual or you risk serious injury or death.
Always wear appropriate shoes, clothing, and protective gear when driving. Protective gear includes the use of a helmet, knee pads, and elbow pads. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and protects the back of your head. Remove or tie back anything loose (i.e. clothing, hair, jewelry, etc.) that could be caught in any moving parts. Always fasten the seat belt before riding and ensure it is securely tightened. A loose seat belt can get stuck in the wheels.
Be sure to read and follow all the “WARNING CAUTION notices in this manual. Never allow two or more riders at the same time.
To avoid burns caused by high temperature, Do not touch the motor.
Do not lift or press the rear spoiler. Do not lift the product when holding the taillight. Always lift the rear bumper when you need to carry the Gokart.

Where to Drive:

When entering public spaces, always comply with local laws and regulations. Only ride in areas where you have first obtained permission from the property owner.
The Gokart is designed to be driven on a dry, flat, hard surface, free of obstacles, bumps, holes, and other hazards.
Do not drive on roadways, near motor vehicles, pedestrians, bicyclists, animals, on or near steep inclines or steps, curbs, near swimming pools, through puddles or other bodies of water. Use caution when riding in areas with trees, posts, ces. You must leave sufficient ,space between you and those items to be able to safely pass them.
Do not ride the Gokart at night.
Do not ride on any ramp or incline that exceeds the maximum slope.
The Gokart is never to be ridden indoors.
Do not ride in the snow, rain, or on roads that are wet, muddy, icy, or that are slippery for any reason. Do not ride over obstacles (including, but not limited to, sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a collision.
Do not allow the Gokart to get wet. You risk damage to the batteries and the potential for a fire or explosion due to a wet battery pack.

How to Drive:

Gokart is not a means of transportation. Please obey local laws, regulations, and policies when driving.
Do not turn the Gokart on unless it is parked on flat ground. As with other vehicles, faster speeds require longer braking distances. Sudden acceleration or braking on smooth surfaces could lead to wheel slip and collisions.
Be cautious and always keep a safe distance between you and others when driving. Be alert and slow down when entering unfamiliar areas. Do not drive at unsafe speeds. You must always use good judgment based on your driving skills and the surrounding environment.
Do not allow anyone to drive your Gokart on his/her own unless he/she has carefully read this manual, and followed the NewRider Tutorial. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the Gokart and make sure each new rider wears a helmet and other protective gear.
To avoid distraction when driving your Gokart, do not use a cell phone, camera, headphones, or earbuds, or perform any other activities while driving.
When approaching or crossing an intersection, road, corner, or gate of any kind, always slow down and yield to others.
Be alert! Scan both far ahead and in front of you. Your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice). Use caution when transitioning over differing terrain.
Always slow down when turning. Turning at a high speed can cause loss of control, possible vehicle turn-over, and risk of injury or death.
Do not perform stunts of any kind. All four tires must remain on the ground at all times.
While driving the Gokart, always remain seated with arms and legs inside the Gokart.
Do not carry cargo of any kind.
If the Gokart makes an abnormal sound or signals an alarm while driving, stop immediately and do not use the Gokart or Ninebot S-Max until the cause of the noise/alarm has been identified and corrected. Contact after-sales service for assistance.

Who Should Drive
The manufacturer recommends drivers be at least 14 years old. Children under the age of 16 should only drive under adult supervision. Always follow these safety instructions:

People who should not drive the Gokart include
- Anyone under the influence of alcohol, drugs, or intoxicants.
- Anyone who suffers from disease that puts himself/herself at risk if he/she engages in strenuous physical activity.
- Anyone who has problemsa with balance or with motor skills that would interfere with their ability to maintain balance.
- Anyone whose weight is outside the stated limits (see Specifications).
- Pregnant women.
The Gokart is intended for one person only.
To drive safely, you must be able to clearly see what is in front of you and you must be clearly visible to others.
Drivers must be able to hear the env around them.

After Each Drive

Park the Gokaat ground and power it off. Failure to do so could cause the Gokart to move when exiting potentially causing injury to you and others around you.
Allow the Gokart to cool down before charging. Do not attempt to charge the Gokart, if it, the charger, or the power outlet is wet. Follow the instructions in the Ninebot S-Max User Manual.
As with any electronic device, use a surge protector when charging to help protect your Gokart from damage due to power surges and voltage spikes.
Only use the charger specified by the manufacturer. Do not use a charger from any other product.
Only use Ninebot or Segway-approved parts and accessories. Do not modify your Gokart. Modifications to your Gokart could interfere with the operation and performance of the Gokart, which may result in serious injury and/or damage and could void the Limited Warranty.

Maintenance and Storage

Be sure the Gokart is powered off before performing any maintenance or when installing or replacing parts.
When installing components, use proper and sufficient force until the component is secure. If the installation is too loose or too tight, the Gokart may not function properly, resulting in the potential for injury to you or others or damage to, or malfunction of, the Gokart.
Install batteries for the Gokart by the instructions and ensure that the positive and negative electrodes of the batteries are installed correctly. according toly use the batteries specified by the manufacturer. Do not charge the batteries as this may cause a risk of fire or explosion. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. When the batteries are dead, purchase and replace them yourself.
Follow all instructions contained in the Ninebot S-Max User Manual when performing maintenance on the Ninebot S-Max.
Do not use a strong water flow or high-pressure hoses to clean the Gokart. Avoid getting water in the charge port. If your Gokart has been exposed to heavy rain store it outdoors away from buildings and people but protected from the elements until it is dry.
Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials. Store indoors when not in use. The Ninebot S/S-PRO should be ,stored in an environment where the temperature is no higher than 122°F (50°C) or lower than -4°F (-20°C). If the temperature of the storage environment is lower than 32°F (0°C), do not charge it until after placing it in a warm environment: over 50°F (10°C).
Do not charge the Gokart when the charge port, charger, or power socket is wet. Only use the original charger provided by Ninebot or Segway when charging. Do not charge dry cells. The data and parameters of the product vary with different models. They are subject to change without prior notice. Go to www.segway.com for updated information.

Diagram

Adjustment

Stretch the frame and adjust the length of the body

With both hands holding the steering wheel and the seat, stretch the frame out to a suitable position along the horizontal direction of the connection tube.
Align the scalable structure of the frame with the marking on the connection tube.
Positioning: Use the short hex wrench to press the two screws into the holes on the left and right connection tube in order, as shown in the figure (The screw is set to a depth of about 1 cm for successful position).
Tighten the 4 screws.

Adjust the steering wheel height
Remove the speaker before adjusting the height of the steering wheel (see page 11).

Raise the steering wheel to a suitable height.
Insert the quick-release screw into the hole of the corresponding height. （Insert the quick-release screw into the hole of the corresponding height.）
Tighten the quick-release nut.
Press to fix the steering wheel quick-release components.
Ensure the steering wheel does not shake. Otherwise, repeat the steps b, c, d, e.

Installation of Accessories

Install the Rear spoiler

Note: Do not press or lift the rear spoiler during installation.

Insert the tail bracket into the tail jack.
Use the 2.5 mm hex wrench to tighten the 6 screws into the main body of the rear spoiler (See Accessory No. 2).

Install the Ninebot Engine Speaker

Place the base in a proper position (as shown below) wrap the strap around the vehicle body and fasten the strap. Press the remaining part of the strap into the storage slot.
Align the holes on the bottom of the speaker. Press down until you hear a “clicking” sound.

Remove the Speaker

Press the disassembly switch while lifting the speaker upward.
- For more information about the speaker, see the user manual of Ninebot Engine Speaker.

Disassembly and Replacement of Tires

Only applicable to Gokart front tire.

Use a 19 mm wrench to remove the middle screw.
Replace the tire. Replace the tire.
Tighten the screw.

Charging

Disconnect the electrical connection cable of the Gokart from the power extension cord.
Charge the Gokart by plugging the S-Max power cord into the power extension cord.

Gokart cannot charge if its temperature exceeds 104°F (40℃). Please wait for the temperature to drop before charging.Only use the original charger, otherwise, the battery will be damaged and there is a risk of fire. Do not use wet or damaged batteries. Do not charge when the charge port or cable is wet.

Before the First Drive

For your safety, a new Gokart is inactivated. Please activate your Gokart via the App before first use. Scan the QR code to download the App (iOS 9.0 or above, Android™ 4.3 or above, Bluetooth 4.1 or above).

The Gokart has four modes: ECO, STRADA, SPORT, and CORSA mode. After the Gokart is activated, the mode can be switched via the App.

How to activate:

Connect the electrical connection cable and the power extension cord. Install the batteries.

Install the App and register/log in.
Press the power button on the S-Max to turn on the Gokart Pro. The Gokart will automatically power off when idle for 10 minutes.
Open the App and click Vehicle > Search device to connect to your Gokart. The vehicle will beep when the connection is successful. The status indicator will stop blinking and remain illuminated.
Follow the instructions in the app to activate the Gokart and complete the corresponding tutorial and exercises.

Now you can start to drive your Gokart, check its performance, and interact with other drivers. Have fun!

Ninebot Engine Speaker:

The Speaker and the App cannot be connected to the Gokart at the same time. If you have connected the App, disconnect the App from the Gokart first, confirm that the indicator light of the Gokart is flashing blue, and then pair the Speaker.

Press the power switch to turn on the speaker. Press and hold the Mode button to start pairing.

Learning to Drive

Note: Please check the battery level of S-Max before use. If the battery is too low, please charge it immediately.

Specifications

| | Ninebot Gokart Pro
---|---|---
Product| Model| N2C432

Size

| Vehicle size| 55.9 × 33.5 × 23.6 in (1420 × 852 × 600 mm)
Package size| 41 × 33.5 × 18 in (1040 × 852 × 459 mm)

Weight

| Max payload| Approx. 220 lbs (100 kg)
Net weight| Approx. 112.9 lbs (51.2 kg)

Driving

| Age| 14+ years old
Height| 51.2–74.8 in (130–190 cm)

Main

parameters

| Speed limit| Approx. 23 mph (37 km/h)
Reversing speed limit| Approx. 1.9 mph (3 km/h)
Typical Range[1]| Approx. 15.5 mi (25 km)
Steering ratio| 2.1:1
Ground clearance| Approx. 1.8 in (45 mm)
Maximum slope| Approx. 15 °
Traversable Terrain| Flat surface, paved road; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm); slopes < 15 °
Operating temperature| 14–104°F (-10–40°C)
Storage temperature| -4–122°F (-20–50°C)
IP rating| IPX4
Charging time| Approx. 4 hour
Speed modes| ECO mode—max. speed: 5 mph (8 km/h); STRADA mode—max. speed: 11 mph (18 km/h); SPORT mode—max. speed: 17.4 mph (28 km/h); CORSA mode—max. speed: 23 mph (37 km/h).

Battery

Typical Range: tested while riding under full power, 165.3 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement. Some of the factors that affect range include: speed, number of starts and stops, ambient temperature, etc.

Charger

| Input Voltage| 100-240 V ～ 50/60 Hz
---|---|---
Output oltage| 59.5 V DC
Nominal Power| 120 W
Output Current| 2 A
Front compartment battery[2]| Model/Quantity| 6 AA Batteries
Brake| Braking method

Braking distance[3]

| Electronic brake + mechanical handbrake

6 m

Tires| Front tire| Tire width: 3 in (80 mm); flatness ratio: 60%; hub diameter: 5 in (127 mm)
Rear tire| Tire width: 2.7 in (68 mm); 10 × 2.75 in, hollow solid tire

Light

| Headlight| 0.2 Watt white LED light bar

Status indicator

| The indicator comes in three colors: blue, yellow, and red. Blue means that the vehicle is in normal condition. Yellow means that the batteries in the front compartment need to be replaced. Red means that the vehicle has a performance failure, and you need to open the app to check the cause of the failure and contact the after-sales service.
Taillights| Rull-color RGB taillight/brake lightV

Front compartment battery: The battery compartment inside the frame that is used to power the frame indicator/headlight. When the battery is low, the blue indicator light turns yellow and blinks. You need to replace the batteries yourself.
Braking distance: Under the circumstances of full power, 154 lbs (70kg) load, and measured on a flat hard road at an average speed of 12.4 mph (20 km/h).

Certifications
The battery complies with UN/DOT 38.3. The battery complies with ANSI/UL 2271. Federal Communications Commission (FCC) Compliance Statement for USA This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference underntial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful inter,ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

This device complies with Industry Canada license-exempt RSS standard (s). Oof peration is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (B)/NMB-3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user’s authority to operate the equipment.

Ninebot S-Max
(Hereinafter referred to as S-Max)

Riding Safety

The S-Max is a recreational product. Before mastering riding skills, you need to practice. Neither Ninebot (means Ninebot (Beijing) Tech Co., Ltd. and its subsidiaries and affiliate) nor Segway Inc. is responsible for any injuries or damage caused by a rider’s inexperience or failure to follow the instructions in this document.
Please understand that you can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that whenever you ride the S-Max you risk injury or death from loss of control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require longer braking distances. Sudden braking on smooth surfaces could lead to wheel slip, loss of balance, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.
Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and protects the back of your head.
Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards.
Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Please obey local traffic laws and regulations.
In places without laws and regulations governing self-balancing electric vehicles, comply with the safety guidelines outlined in this manual. Neither Ninebot nor Segway Inc. is responsible for any property damage, personal injury/death, accidents, or legal disputes caused by violations of the safety instructions.
Do not allow anyone to ride your S-Max on his/her own unless they have carefully read this manual, watched the safety video, and followed the New Rider Tutorial on the Segway-Ninebot App. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the S-Max. Make sure each new rider wears a helmet and other protective gear.
Before each ride check for loose fasteners, damaged components, and low tire pressure. If the S-Max makes abnormal sounds or signals an alarm, immediately stop riding. Diagnose your S-Max via the Segway-Ninebot App and call your dealer/distributor for service.
Be alert! Scan both far ahead and in front of your S-Max — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).
To reduce risk of injury, you must read and follow all “CAUTION” and “WARNING” notices in this document. Do not ride at an unthe safe speed. Under no circumstance should you ride on roads with motor vehicles. The manufacturer recommends riders be 16+ years old. Always follow these safety instructions:
- People who should not ride the S-Max include:
- Anyone under the influence of alcohol or drugs.
- Anyone who suffers from a disease that puts them at risk if they engage in strenuous physical activity.
- Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.
- Anyone whose height or weight is outside the stated limits (see Speciﬁcations).
- Pregnant women.
- Anyone who suffers from a disease that puts them at risk if they engage in strenuous physical activity.
- Anyone who has problems with balance or with motor skills that would interfere with their ability to maintain balance.
- Anyone whose height or weight is outside the stated limits (see Speciﬁcations).
- Pregnant women.
Do not attempt to charge your S-Max if it, the charger or the power outlet is wet.
As with any electronic device, use a surge protector when charging to p protect your S-Max from damage due to power surges and voltage spikes. Only use the Segway-supplied charger. Do not use a charger from any other product.
Use only Ninebot or Segway-approved parts and accessories. Do not modify your S-Max. Modifications to your S-Max could interfere with the operation of the S-Max, could result in serious injury and/or damage, and could void the Limited Warranty.
Do not sit on the steering bar. Doing so could result in serious injury and/or damage to your S-Max.
Prolonged Exposure to UV Rays, Rain and the Elements May Damage the Enclosure Materials, Store Indoors When Not in Use.

2 Diagram

Remove the S-Max body from the Gokart

Assembling Your S-Max

Install the steering bar

Insert the steering bar into the S-Max body.
Tighten the two screws. (See Accessories No. 3)
Put the cap on.

Adjust the knee pad height

Rotate the height adjustment knob counter-clockwise.
Lift the knee pads to the desired height. Rotate the height adjustment knob clockwise to tighten.
- Lift the guide bar to help steer the S-Max without a rider when powered on.

Warning:
DO NOT use to lift or carry the S-Max.

Tire Replacement

Tires are subject to wear and need to be purchased separately.

Remove the six screws from the tire.
Remove the hubcaps and then remove the outer tire.
Remove the hubcaps and then remove the outer tire.
- The side with printing should face outwards.
- The steps above are only applicable to the replacement of rear tires.
- The comfortable tire is only for S-Max.

Charging

Your S-Max is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).

WARNING
Only use the original charger, otherwise, the battery will be damaged and there is a risk of fire. DO NOT use wet or damaged batteries. DO NOT charge when the charge port or cable is wet.

Before the First Ride

There are safety risks when learning to ride the S-Max. You must read the Safety Instructions and follow the New Rider Tutorial in the App before your first ride For your safety, your S-Max is not activated at this time and will beep occasionally after Power ON. Until activated, the S-Max maintains a very low riding speed and steering sensitivity. Install the App on your mobile device (with Bluetooth 4.1 or above), connect to the S-Max with Bluetooth, and follow the App instructions to activate your S-Max and follow the training procedures Scan the QR code to download the App (iOS 9.0 or above, Android™ 4.3 or above).

Segway-Ninebot App

Install the App and register/log in.
Power ON the S-Max. The Bluetooth icon blinking indicates the miniPLUS is waiting for a connection.
Click Vehicle > Search device to connect to your S-Max. The S-Max will beep when the connection is successful. The Bluetooth icon will stop blinking and remain illuminated.
Switch the S-Max to Self-balancing mode on the App. Follow the prompts to watch the Riding Safety video, complete the New Rider Tutorial, and then activate the S-Max.
- When the mode is switched successfully, you will hear two beeps.

Learning to Ride

Wear an approved helmet and other protective gear to minimize any possible injury.

Note: Minors must study and ride under the supervision of their guardians. After activation, the App will lead you through the New Rider Tutorial. Please follow the instructions in the App and this manual. For your safety, the miniPLUS will limit the max speed to 4.3 mph (7 km/h) until you complete the New Rider Tutorial. After completing the New Rider Tutorial, the max speed will be limited to 6.2 mph (10 km/h). For the first 0.6 miles (1 km) completed, you can disable the speed limiter via the App and reach a maximum speed of S-Max (see specifications).

The actual speed limit will be increased or decreased depending on your riding habits and experience.

Go to a large open area and ask a friend to assist you on your first ride.
- Always step on/off from the back of the vehicle.
Lightly place one foot on the foot mat, while keeping your other foot on the ground holding your weight. Do not press the steering bar with your leg.
Slowly transfer your weight onto the S-Max. The unit will beep, indicating it is now in Balance Mode. Slowly step on with your other foot.
Stand with your weight evenly distributed on both feet and relax, looking straight ahead.
Gently lean your body forward and backward to control your movement.
To turn, gently lean left or right against the steering bar.

Warning

Avoid contacting obstacles with the tire/wheel.
When traversing small bumps or uneven terrain, maintain a moderate speed of 2–6 mph (3–10 km/h) and keep your knees bent. Do not go too slow or too fast; otherwise, you may lose control and fall.
Watch your head when passing through doorways.
Avoid slopes steeper than 15°.
DO NOT ride through puddles or other bodies of water. Do not get wet.
DO NOT attempt stunts of any kind. Always keep both feet on the foot mats.
Maintain contact with the ground at all times. Do not jump or attempt stunts.
DO NOT ride on low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).
DO NOT ride on public roads, motorways, or highways unless the local laws or regulations have exceptions.
For one rider only. DO NOT ride double or carry any passengers. DO NOT carry a child.
DO NOT ride over holes, curbs, steps, or other obstacles.
You must read and understand the Warnings and Safe Riding instructions in this manual before attempting to ride the vehicle. Failure to follow these warnings could result in death or serious injury due to: loss of balance, traction, and/or control collisions and falls.
DO NOT accelerate when the vehicle tilts back or sounds an alarm (speed limiter). Do not attempt to override the speed limiter.
DO NOT accelerate or decelerate abruptly. Do not lean more than 5° or accelerate/decelerate faster than 2.5 mph/s (4 km/h/s).
Do NOT use a mobile phone or wear earphones when riding.
The rider must be more than 1.3 m in height and 40 kg in weight.

Bluetooth Remote Control

You can use the Segway-Ninebot App to drive your Ninebot S-Max.

Steps:

Open the App and connect your S-Max.
Tap the icon ( ).
Drag the virtual joystick ( ) to drive your S-Max.
- The default maximum speed is 4.3 mph (7.0 km/h), but you can change the max speed in the App.

WARNING:

Do not stand on the S-Max when it is under Bluetooth remote control. Doing so risks serious personal injury or damage.
Do not use Bluetooth remote control in crowded areas or where there is a potential risk of endangering people or property if operated in an unsafe manner.
The Bluetooth range is 30–50 feet (10–15 meters). If your device goes outside Bluetooth range, the S-Max will stop moving in the Bluetooth remote control.

Lifting and Power-assist Mode

Operating the wrong way may injure your fingers/hands.
Pull up the guide bar to enter Power Assist Mode (powered on, with no rider). Steer the S-Max across smooth surfaces using the guide bar.
Do not guide it upstairs, across potholes, overlarge cracked/uneven surfaces, or over other obstacles.

Specifications

		Ninebot S-Max
Product	Model	N3M432
Dimensions	10.3 × 22.8 × (25.4–37.6) in / 262 × 578 × (645–955) mm[1]
Weight	Payload	88.2–137.4 lbs / 40–85 kg
Net Weight	Approx. 46.3 lbs (21 kg)
Rider	Age	16–60 years old
Height	51.2–78.7 in / 130–200 cm

Machine Parameters

in (3 cm)

Operating Temperature| 14–104°F (-10–40°C)
Storage Temperature| -4–122°F (-20–50°C)
IP Rating| IP54
Charge Time| 4 hours

Battery

Charger

The two values in brackets are the lowest distance from the ground to the highest part of the mainframe.
Typical Range: tested while riding under full power, 165 lbs (75 kg) load, 77°F (25°C), 60% of max. speed on average on pavement.
- Some of the factors that affect range include: speed, number of starts and stops, ambient temperature, etc.

Certifications

This product is certified to ANSI/CAN/UL-2272 by TUV Rheinland.
The battery complies with UN/DOT 38.3.
The battery complies with ANSI/UL 2271.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC STATEMENT

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 othe FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (B)/NMB-3(B)
Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user’s authority to operate the equipment.

Assembly and Riding Safety Video

After disassembling the steering bar of S-Max, it can be mounted onto the body of the Gokart and assembled into Ninebot GoKart Pro.

Switch the S-Max to Gokart mode on the App before assembly.
How to: Log in on the App > connect your S-Max > Settings > Gokart mode.
Scan the QR code to watch the Assembly and Riding Safety Video.

Maintenance

Cleaning and Storing
Use a soft, wet cloth to wipe the mainframe clean. Hard-to-remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth. Store your vehicle in a cool, dry place. Do not store it outdoors for extended periods. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

WARNING
Do not wash your Gokart Pro or S-Max with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of the vehicle. Do not wash your vehicle with a power washer or high-pressure hose. Make sure the Gokart Pro or S-Max is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may expose yourself to electric shock or damage the electronic components.

Battery Pack Maintenance

Do not use battery packs of other models or brands, otherwise, there may be safety risks.
Only use a Ninebot or Segway-approved charge cable. Please use it properly within the rated range.
Do not place the battery pack in the fire. Doing so will cause battery failure, overheating or even fire and explosion.
Do not store or charge the battery at temperatures outside the stated limits (see Specifications).
Do not discard or destroy the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal.
Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery.

NOTE
Typically, a fully charged battery should retain charge for 120-180 days when in standby. Electronics inside the battery record
the charge-discharge condition of the battery; damage caused by over-discharge or under-discharge will not be covered by the

Limited Warranty
A well-maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]) the battery range and performance is at its best; whereas using it at temperatures below 32°F (0°C) can decrease range and performance. Typically, at -4°F (-20°C) range can be half that of the same battery at 70°F (22°C). The battery range will recover when the temperature rises. More details are available in the App.

WARNING
Do not attempt to disassemble the battery. Risk of fire. No user-serviceable parts. Do not ride when the ambient temperature is outside the machine operation temperature (see Specifications) because low/high temperatures will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Trademark and Legal Statement

Ninebot is the registered trademark of Ninebot (Tianjin) Tech Co., Ltd; Segway and the Rider Design are the registered trademarks of Segway Inc., Bluetooth is the registered trademark of BLUETOOTH SIG, INC.; Android, Google Play are trademarks of Google Inc., App Store is a service mark of Apple Inc., The respective owners reserve the rights of their trademarks referred to in this manual. We have attempted to include descriptions and instructions for all the functions of the Ninebot Gokart Pro & Ninebot S-Max at the time of printing. However, due to the constant improvement of product features and changes of design, your Ninebot Gokart Pro & Ninebot S-Max may differ slightly from the one shown in this document. Visit Apple App Store (iOS) or GooglePlay Store (Android) to download and install the App. Please note that there are multiple Segway and Ninebot models with different functions, and some of the functions mentioned herein may not apply to your unit. The manufacturer reserves the right to change the design and functionality of the Ninebot Gokart Pro & Ninebot S-Max product and documentation without prior notice. © 2020 Ninebot (Beijing) Tech Co., Ltd. All rights reserved.

Ninebot Gokart Pro Legal Statement:

Please read the User Manual carefully and learn how to ride Gokart. Make sure you understand all the instructions and safety warnings. In order to minimize the risks, you’re obliged to read the User Manual carefully before your riding. It covers most knowledge about how to ride the Gokart safely and how to take appropriate precautions. If it is difficult for you to fully follow the riding instructions of the User Manual, please do not attempt to ride Your Gokart casually. Neither Ninebot nor Segway is responsible for any injuries, damages or legal disputes caused by a user’s inexperience or failure to follow the instructions in this manual.
Please check and obey your local laws or regulations. IT IS THE USER’S RESPONSIBILITY TO COMPLY WITH ALL LAWS PERTAINING TO THE USE OF GOKART OR SIMILAR PRODUCTS IN YOUR JURISDICTION. Various countries or regions have different laws and regulations about Gokart, please note:
A helmet may be legally required by local law or regulation in your jurisdiction.
A Driving and/or Vehicle License may be legally required by local law or regulation in your area.
Your Gokart is not allowed to be driven in motorways or highways in. You can gain further guidance from the relevant department(s) in your country or region.
Your Gokart is not treated as road vehicle and not allowed on public roadways. You are not allowed to ride your Gokart to attend any go-kart racings or any other professional racing competitions.
Please ensure yourself timely upon purchase of the product to minimize the risks of use.
Please check whether Your Gokart and its accessories are in good condition immediately when you receive them.
All components of Gokart must be properly installed as per in the User Manual. Inappropriate installation may lead to loss of control, collisions and falls.
The product may contain removable components and small parts. Please keep it out of the reach of children to avoid choking hazards.
Before using Your Gokart, please check its tire performance, battery level vehicle installation status, and all functional parts. Check whether the front and rear brakes function properly and ensure that the brake cable is not damaged. The brake cable should have the right tension. Screws, nuts, bolts and other fasteners must be checked. Make sure there’s no loose part. If any abnormality is found, please stop using it immediately and contact our after-sale service for help.
You should always be cautious and maintain proper speed when riding. Avoid speeding, overloading or performing stunts of any kind. Do not try to touch the tires with your hands or feet when riding.
Do not dispose of your Gokart in a landfill, by incineration, or by mixing with household trash. Danger/ injury can occur because of the electrical components and the battery. For information about battery and electrical waste, please contact your household waste disposal service, your local or regional waste management office, or your point-of-sale.
Try not to use any non-original accessories, and never dismantle or modify the product without authorization. All damage and loss arising therefrom will be your sole responsibility.
NINEBOT IS SUBJECT TO NO COMPENSATION RESPONSIBILITY OF ANY CLAIM, LIABILITY, AND LOSS THAT ARISES (OR MAY ARISE) FROM VIOLATING ANY OF THE ABOVEMENTIONED CLAUSES.
NINEBOT reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Improvements and changes to this user manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by NINEBOT at any time and without notice. Such changes will, however, be incorporated into new editions of this user manual. All illustrations are for illustration purposes only and may not accurately depict the actual device. Actual products and functions may vary. Due to the update of the product, there may be some deviations in color, appearance and other aspects between the product listed in this manual and the product you purchased. Please refer to the actual product.
After purchase, you may either use the Product according to the above-mentioned clauses or return the Product as per the “Warranty Policies” . In the case of a return, please ensure that both the Product and the packaging thereof are in good condition for resale.
This document should be considered as a permanent part of the product and should remain with the vehicle when it is resold.