hp A12 Smartstation 7th Gen Mini PC User Manual
- June 1, 2024
- HP
Table of Contents
hp A12 Smartstation 7th Gen Mini PC
User manual
Hardware Configuration
-
CPU
Intel Alder Lake-N100/10th Core i3-1000NG4/10th Core i7-1060NG7 -
RAM
DDR4 12GB/16GB/24GB -
Storage
SATA/PCIe 512GB -
Wi-Fi
Realtek 8821CE/2.4G/5G -
Bluetooth
Realtek 8821CE/BT4.2 -
Power Indicator
Power ON: Green/Power off: Red
System Information
- OS Windows 11 Pro
- Language Multi-Language
Precautions For Use
- In order to continue to improve the user experience , we may occasionally update app and firmware.
- Do not use harsh of chemical solvent , cleaning products , we recommend using a soft cloth to wipe .
- Do not dispose of by fire , or incinerate , to avoid having fire accident.
- Do not attempt to open the housing or to repair , if a failure occurs , please contact the customer service .
- Please note seepage while clean electronics , be careful of electric shock.
- Check for any frayed or damaged cords or plugs .
- Do not arbitrary discard the product , we should protect the environment.
- Work environment : -10 C-45C30%~90%humidity .
- Storage environment : -15 C~45 C10%-90% humidity .
- Please keep plastic packaging bags out of reach of infants and children to prevent the risk of suffocation .
Product Introduction
The layout of buttons and ports
- Power button/indicator
- Head set and microphone port
- USB port
- SD card slot
- Security lock slot
- Type-C port
- Adapter port
- HDMI port
- Network port
Packing list
Note:
The illustrations in the manual(such as products, accessories, user
interfaces, etc.)are for reference purposes only. Due to product updates,
there may be slight differences between the physical product and the
illustrations. Please refer to the actual product.
Installation guide
Please prepare yourself : Wired or wireless keyboards and mouse.
Installation Steps :
- Connect the power adapter to the power supply ;
- Connect the HDMI interface of the display ;
- Connect the keyboard to the wired keyboard and mouse (the wireless keyboard can be connected after entering the system) ;
- Connect to network with a router ;
- Press the power button to turn on the machine .
Wall-mounted installation procedure
Power button and indicator status:
Hardware upgrade and replacement instructions
The following operations need to be started with the power supply disconnected |
---|
Installation of DDR memory (as shown in the figure) :
Align the memory module key with the memory socket koy , insert it into the
memory at a 30 ‘angle , and slide the module into place .
Installation of SSD card las shown in the figure) :
- Align the groove on the solid-state drive with the M.2 slot on the motherboard .
- Slide the SSD in and secure t with a screw .
Note : Please operate under the guidance of professionals, and the damage caused by artificial disassembly shall be at its own risk.
FCC Warning
- This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>