Amazon Basics Digital Optical Audio Toslink Cable for Sound Bar-Instructions

Amazon Basics Digital Optical Audio Toslink Cable for Sound Bar

Specifications

• CONNECTOR TYPE: Optical,
• CABLE TYPE: Fiber Optic,
• COMPATIBLE DEVICES: Television,
• BRAND : Amazon Basics,
• PRODUCT DIMENSIONS: 72 x 0.5 x 0.5 inches,
• ITEM WEIGHT: 3.2 ounces

Introduction

This cable is used to connect the audio systems together. Connect a CD player, Blu-ray player, gaming console, or another audio component to an audio system or home theatre using this handy cable. The cable has buffer tubing and corrosion-resistant, gold-plated connections for distortion-free sound, in addition to its robust PVC casing.

Toslink cables have connector grips for ease of handling and retractable rubber tips to preserve the cable when not in use. Compatible with most standard and high-definition Toslink-equipped devices, including gaming systems, LCD flat-panel TVs, Blu-ray/DVD players, and more.

How to use

• Connect one side of the cable with the TV, game control or Blu Ray player.
• Connect the other side of the cable with the sound bar, CD/DVD and MP3 Player.
• Now your devices are connected.

Frequently Asked Questions

• Is there a distinction between Toslink and optical connections?
  The Toslink is required to transform digital audio so that the wired headset can hear volume. To convert this audio, the digital optical works in tandem with the Toslink. Both were required in order for me to convert audio and hear sound through my headset. 0 out of 2 people found this useful.

• How long may a digital optical cable be run?
  The ADAT specification specifies a maximum optical wire length of five meters (around 16 feet). However, the length you can accomplish is mostly determined by the cables you choose. Optical cables that are inexpensive lose signal quickly. Glass cables, on the other hand, can be utilized for far greater distances.

• What is a fiber optical cable and how does it work?
  A fiber optic cable is made up of numerous thin strands of polished plastic that are used to transmit light. The digital audio signals are sent as light pulses across the connection. They’re less susceptible to electrical interference, and the signal lasts longer.

• What is a digital optical cable, and how does it work?
  A digital optical cable is used to carry data from one source to another, usually audio or video. Digital optical cables are often more expensive than coaxial or composite cables, but they are far more effective at reproducing a signal throughout the transfer.

• What is the maximum length of a digital coax cable?
  Never travel beyond 10 meters using only RG6 cable, according to IEC 61937 regulation (coaxial). Use GLASS fiber (never plastic junk) for optical and don’t go above 15 meters.

• Do Toslink cables make a difference?
  The real connection’s quality is the most important factor. After then, it’s usually a question of length. If the length is short, a standard plastic fiber will suffice. To get a better s/n-ratio, use glass-fiber with high- quality connectors for longer cables.

• Is there a difference between digital optical cables and analogue optical cables?
  If you get a Dolby Digital signal and it doesn’t cut off, your optical cable is fine. The audiophile response is that different optical lines can generate different amounts of jitter when transmitting PCM. The truth is that your gear’s digital-to-analog converter has a much greater impact on the sound.

• Is there a difference between Spdif and Toslink?
  These cables are capable of delivering the greatest audio quality. However, the way these two works is different. The TOSLINK is a digital optical cable, whereas S/PDIF is a digital coaxial cable.

• What exactly is a TOSLINK port?
  The TOSLINK connection system (both port and cable) was invented by Toshiba and is more widely known as an optical, digital optical, or fiber-optic audio connection. Electric audio signals are converted to light and delivered through a plastic, glass, or silica fiber with TOSLINK.

• Is it true that optical audio cables come in a variety of shapes and sizes?
  Full-size Toslink and mini-optical are the two types of optical connections to be aware of. Between your digital audio source component and an A/V receiver or DAC, a coaxial digital cable will provide a distortion-free connection.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>