Goowls Camera User Manual: IPC2-1 Indoor WiFi Security Camera Guide

The Goowls Indoor WiFi Security Camera User Manual is a comprehensive guide that provides users with all the necessary information and instructions to set up and use their Goowls camera. The manual includes details on the camera’s specifications, components, and features, as well as a step-by-step guide on how to connect the camera to the YI loT app. The manual also includes information on how to connect the camera to Amazon Alexa, frequently asked questions, and troubleshooting tips. The Goowls camera is a smart security camera that offers 1080P resolution, 200 Mega Pixels, and two-way audio/intercom communication. It is compatible with Android, iOS, and Windows devices and supports wireless encryption using WEP, WPA, and WPA2. Users can store their video footage on a 4-64GB/Class10 TF card or cloud storage. The Goowls Indoor WiFi Security Camera User Manual is an essential resource for anyone looking to set up and use their Goowls camera effectively.

Goowls Indoor WiFi Security Camera User Manual

Goowls Indoor WiFi Security Camera User Manual

Packing list

Front

TF Card Storage

The TF card slot sits below the camera lens, push the camera lens upwards to insert or remove TF card.

Back

Specification

Component description

Reset Button Press and hold Reset for about 5 seconds. When the horn sounds short voice, the reset is successful.
It is recommended to insert a 4-64GB high-speed Micro TF card, otherwise, it will not be able to store, view historical video, and support Important functions such as firmware upgrading. 1 install YI loT APP
Download APP: scan the QR code below to download and install. Register and log in: open the YI IOT APP to register and log in according to the prompts.

http://www.yunyiiot.com/yunyiapp

YI IOT service supports PC downloads (Only support Windows, Mac cannot be supported) Please download from this
Website: http://yunyiiot.corn/html/download.html

Add The Device

Please make sure that there is a available Wi-Fi and the Internet is connected.
Find the USB port on the bottom of the device and plug in the power cord to power it on, please wait 20 seconds until you hear “DiDiDi”.
Then go to APP home page, click the “+” on the main screen, configure according to the instructions in the APP.

APP Video Browsing Details

How to connect with Amazon Alexa

How to connect with Amazon Alexa

Requirement:

1. Amazon Alexa device and Alexa app.
2. the smart Wi-Fi camera connected with VI loT App.
3. YI loT App user ID and password.
4. Please make sure your Alexa device has been added in the “Add Device” of the Alexa app

Add YI loT as a Skill for Alexa
Open Alexa app and choose Skill & Games

-> Search for VI loT -> ENABLE TO USE -> Enter the VI loT account -> Authorize to use
-> And then, the device you added on VI loT App will sync to Alexa App.
Also, you can ask Alexa to discover new devices for you in this moment.
Note: you need to set exact name for the smart camera on YI loT App, if not, Alexa may tell you:” Sorry, I can’t find the device named xxx…”

Warm tips

To avoid the risk of electric shock, do not disassemble or attempt to repair the unit.
Please make sure the camera is turned off before plugging in/out a TF card to avoid TF card damage or data loss.
Never dispose of the product in fire or water, which may result in an explosion and/or injury.
Unplug this unit during lightning storms or when unused for long periods of time.
Protect the adapter cord from being walked on or pinched, particularly at plug outlets, convenience receptacles, and the point where it exits the unit. The unit should be situated away from direct sunlight or heat sources such as radiators, electronic heats, stoves, or other units that produce heat. Avoid placing on top of stereo equipment that radio heat.

Warranty

60 days money-back guarantee:
If you are not satisfied with this purchase, you can choose to refund this order within 60 days.
12 months limited warranty: The device was used in proper technical working conditions.

Contact Us

For any inquiries or comments concerning our product, please send
Email to: amzservice@goowls.net
Your advice is very much appreciated.
Tel: 1-844-394-5218

Specifications

Specification

|

Value

---|---

Model

|

IPC2-1

Smart APP

|

VI loT

Storage

|

4-64G/Class10 TF card, cloud storage

Wi-Fi

|

Frequency: 2.4GHz

Image Sensor

|

1/2.7-inch CMOS

Resolution

|

1920x1080P/ 200 Mega Pixels

Pan/Tilt

|

Horizontal: 355 degree Vertical: 110 degree

Lens

|

110°

Compatible

|

Android / iOS / Windows

Wireless Encryption

|

WEP, WPA, WPA2

Power

|

5V / 1 A

Communication

|

Two-Way Audio/ Intercom

FAQ’S

How do I connect my Goowls smart camera?

Find the USB port on the bottom of the device and plug in the power cord to power it on, please wait 20 seconds until you hear “DiDiDi”.  Then go to APP home page, click the “+” on the main screen, configure according to the instructions in the APP.

What is Goowls?

Goowls  Security Camera Outdoor 1080P WiFi Wired IP Camera for Home Security Surveillance  2-Way Audio Night Vision Motion Detection Compatible with Alexa Cloud Storage and MicroSD.

Why is my Yi camera not pairing?

Please download the latest version of the YI Action Camera app.  Check that the camera’s Wi-Fi is turned on. Once the camera is on, swipe down to open the shortcut menu and check that the Wi-Fi option is lit. Check that the app is not connected to a different camera’s Wi-Fi hotspot.

Where is the reset button on my Yi outdoor camera?

The reset button is located  on the upper left side of the QR code on the back side of the camera. Please hold down on the reset button until the yellow light turns on. The reset is successful when the yellow light is on or you hear the voice “Reset is successful”.

Why does my Yi camera say waiting to connect?

During the camera pairing process, if you hear an error message that says, “Pairing has timed out”,  the camera didn’t complete the process of pairing with the app. This error occurs when there is a weak Wi-Fi connection to the camera.

Where is QR code on Yi camera?

During the move, please continue to keep the center of the QR code  facing the center of the lens  of the YI cameras directly. Depending on the size of your smartphone, you will hear YI camera saying ‘QR code scan is successful’ and the color of the LED light on the YI camera turns to blue.

Why is my Yi home camera offline?

If you are only seeing the error “Camera Offline”, this issue is related to a power connection issue or network connection issue between the camera and the Wi-Fi device (router, extender).

Can not connect to camera Wi-Fi?

Remove the battery and the memory card from the camera, and then reinsert them. If you didn’t properly insert a recordable memory card into the camera, it may not be able to connect through Wi-Fi. Make sure to insert the memory card correctly after confirming the direction and front/back of the memory card.

What is my network password?

If you have Android 10 or anything newer, you can find the wifi password directly on your phone following these steps:  Go to “settings” on your phone, then “wifi”.  Select “saved networks” and click on your home network. Choose the share option and enter your password.

Why does Yi camera fail to load videos?

If you receive the error, “Video download failed. Switch to the camera automatically”, “Downloading video via encrypted channel” or “Fail to load video”, this means the Alert didn’t get uploaded to the cloud properly. This is  caused by a network connection issue.

Can not connect to camera Wi-Fi?

Remove the battery and the memory card from the camera, and then reinsert them. If you didn’t properly insert a recordable memory card into the camera, it may not be able to connect through Wi-Fi. Make sure to insert the memory card correctly after confirming the direction and front/back of the memory card.

What is my network password?

If you have Android 10 or anything newer, you can find the wifi password directly on your phone following these steps:  Go to “settings” on your phone, then “wifi”.  Select “saved networks” and click on your home network. Choose the share option and enter your password.

How does YI Home Camera work?

The YI Home Camera App  sends instant activity alerts to your phone with our motion detection technology. See if your pet is sleeping on the couch or scratching furniture while you’re away. Use the app to monitor your pet’s activity and send audio commands to him.

How do you reset Goowls?

Reset Button  Press and hold Reset for about 5 seconds. When the horn sounds short voice, the reset is successful. Download APP: scan the QR code below to download and install.

What is my network SSID for Wi-Fi?

Left-click the wireless signal icon (most often located in bottom right corner of the desktop). Within the list of networks, look for the network name listed next to Connected. This is your network’s SSID.

Does removing SD card delete everything?

You can safely remove SD card.” You can now pull it out of your phone or tablet and  not risk losing any data. The device also will stop scanning the SD card, and you won’t need to worry about the system accessing it, even though you haven’t unplugged it yet.

Is it OK to delete photos in camera?

Do not delete photo files from your memory card in-camera. In other words, do not go through your photos and delete them one by one using the delete button on your camera.

What is the resolution of the Goowls camera

The Goowls camera offers 1080P resolution and 200 Mega Pixels.

What devices is the Goowls camera compatible with?

The Goowls camera is compatible with Android, iOS, and Windows devices.

How can I store my video footage?

You can store your video footage on a 4-64GB/Class10 TF card or cloud storage.

How do I connect the Goowls camera to the YI loT app

Find the USB port on the bottom of the device and plug in the power cord to power it on, please wait 20 seconds until you hear “DiDiDi”. Then go to APP home page, click the “+” on the main screen, configure according to the instructions in the APP.

How do I reset my Goowls camera

Press and hold the reset button for about 5 seconds. When the horn sounds a short voice, the reset is successful.

How can I contact customer support for Goowls camera?

For any inquiries or comments concerning our product, please send email to: amzservice@goowls.net. You can also call Tel: 1-844-394-5218.

What is the warranty period for Goowls camera?

The device comes with a 60 days money-back guarantee and a 12 months limited warranty.

VIDEO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>