LASER MID-104GB-968 10 Inch 4G Tablet User Guide

June 17, 2024
Laser

LASER MID-104GB-968 10 Inch 4G Tablet User Guide
LASER MID-104GB-968 10 Inch 4G Tablet

WHAT’S IN THE BOX:

  • 10” 4G IPS Tablet
  • Tablet case
  • TWS earbuds
  • USB-A to USB-C charging cable
  • Quick start guide

YOU MAY ALSO NEED:

  • Wi-Fi password
  • Google account
  • Pre-activated 4G Micro SIM card
  • Micro SD card (max. 128GB)
  • Standard USB charger (car, home, powerbank)

OVERVIEW – TABLET

Product Overview

  1. Headphone jack
  2. Power button
  3. Vol. Up button
  4. Vol. Down button
  5. Reset button
  6. Front camera
  7. Microphone
  8. USB-C port
  9. Micro SD card slot
  10. Micro SIM card slot
  11. Rear camera

SETTING UP THE TABLET

  1. Fully charge the tablet battery using the provided cable. We recommend using any USB wall charger.
  2. (Optional) Gently open the small cover and insert 4G Micro SIM and Micro SD cards. Before inserting your SIM card into your tablet, be sure it is activated. To activate your SIM card, follow the procedures provided by your SIM card provider.
  3. Place the tablet in the tablet case.
  4. Hold down the Power button until the screen turns on.
  5. Set up the tablet by following the on-screen directions.
  6. Fully charge TWS earbuds and connect them with the tablet (instructions on the other side).
    How to insert SIM and SD cards

SETTING UP THE TWS (TRUE WIRELESS STEREO) EARBUDS

Product Overview

  1. Fully charge the TWS earbuds using the supplied cable. We recommend using a standard USB wall charger.

  2. Open the charging case, take out the earbuds and place it in your ears. They will automatically turn on and sync with each other.

  3. On your tablet, go to Settings → Connected devices → Pair new device to start searching for nearby devices.

  4. Select MID-104GB-TWS to start the Bluetooth pairing process.
    NOTE: If MID-104GB-TWS doesn’t appear on your tablet, try again from the step 1.

  5. Confirm the pairing request on the tablet.

  6. Now, any audio played on your tablet should come through the TWS earbuds.

TWS EARBUDS – OPERATIONS

Power On/Off

To turn on and sync the earbuds, open the charging case and remove them. To turn them off, place them back in the charging case and close it. Or, press and hold either Touch Control for 3 seconds to turn on or off.

Play/Pause music

Press the Touch Control to pause. To resume playback, press it again.

Volume Up/Down

Triple-press left or right Touch Control to decrease or increase the volume, respectively.

Select Previous/Next track

Double-tap left or right Touch Control to switch to the previous or next track.

Answer/Hang up calls

Press Touch Control to answer calls; press again to end the call.

Reject calls

Press and hold either Touch Control for 2 seconds to end a call.

Voice assistant

Press and hold either Touch Control for 2 seconds to activate voice assistant.

Charging

When the battery is low, a warning beep will sound until it dies. Place the earbuds in the charging case and connect to power for approximately 1.5-hour charging.

To learn about Andoird 13, go to https://support.google.com/android/#topic=7313240

SCAN FOR MANUAL
QR Code

Documents / Resources

| LASER MID-104GB-968 10 Inch 4G Tablet [pdf] User Guide
MID-104GB-968, MID-104GB-968 10 Inch 4G Tablet, 10 Inch 4G Tablet, 4G Tablet, Tablet
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals